Dry sliding wear of some commercial wrought aluminium alloys /

Dry sliding wear of some commercial wrought aluminium alloys /

Saved in:

書目詳細資料
主要作者:	Mariyam Jameelah Ghazali
格式:	Thesis 圖書
語言:	English
出版:	Sheffield : Department of Engineering Materials, The University of Sheffield, 2005
主題:	University of Sheffield > Dissertations Aluminium alloys Mechanical wear Materials > Testing Materials > Dynamic Dissertations, Academic > United Kingdom
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Investigation on mechanical and wear properties of strontium modified aluminium-silicon alloy /
由: Adibah Amir
出版: (2008)

Physical and wear properties of aluminium matrix composite reinforced with PSAC and slag fabricated via powder metallurgy
由: Zamri, Yusoff

Characterization of age hardening treatment of AA6061 Aluminium alloy through destructive and non-destructive testing techniques
由: Toozandehjani, Meysam
出版: (2014)

Effects of solution treatment temperature on the mechanical properties of commercial recycled aluminium alloy cylinder head (A319)
由: Murizam, Darus

Unlubricated wear of alumina sliding against steel in vacuum and in air /
由: Cheng, Yuping
出版: (1995)

Characterisation of phases and mechanical properties of A1-Si-Ti alloys /
由: Nouari, Saheb
出版: (2001)

Kesan unsur-unsur tambahan terhadap pemejalan, pengerasan umur dan sifat haus bagi aloi aluminium-silikon /
由: Mohd. Harun
出版: (1996)

Microscopic Study of 5083-H321 Aluminium Alloy Under Fretting Fatigue Condition
由: Eslamian, Saeed
出版: (2005)

Study of microstructure and ageing characteristic of aluminium alloy reinforced with glass particulates
由: Hadipramana, Josef

Effect of heat treatment on hardness and wear properties of an aluminum alloy of motorcycle piston
由: Mohd Fizam, Hj. Zainon

Surface modification of aluminium-zinc alloy (AA7075) and its corrosion characteristics /
由: Angel Richard
出版: (2018)

Surface modification of aluminium alloy series 6 (AA6061 T657) and its corrosion characteristics /
由: Tseu, Christopher Zia Chyuan
出版: (2019)

Kajian menentukan parameter optimum proses pengabusan gas bagi penghasilan serbuk aloi aluminium (A1 6061) /
由: Fauzi Ismail
出版: (2002)

Development of anodised aluminium oxide nanostructure from Al-Mn alloy
由: Voon, Chun Hong

Investigation on tribological (wear) properties of aluminum-silicon piston alloy /
由: Tuti Yasmin Alias
出版: (2003)

Simulation of Fatigue Crack Growth in Friction Stir-Welded Joints of 2024-T351 Aluminum Alloy
由: Golestaneh, Amirreza Fahim
出版: (2008)

Dry sliding wear behaviour of thixoformed AL-5.7SI-2CU-0.3MG aluminium alloy/
由: Abdelgnel, Mnel A.H

Fabrication and wear characteristics of alumina tools /
由: Goh, Gregory Kia Liang
出版: (1995)

Corrosion characteristics of aluminium alloys in calophyllum inophyllum biodiesel /
由: Raja Nurul Hani Raja Azhar

Fabrikasi dan penganodan komposit metalurgi serbuk aluminium-magnesium diperkuat gentian pendek alumina saffil
由: Kamrosni, Abdul Razak

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
由: Mohd Harun, Dalila
出版: (2020)

Nanostructured Fe, Ni and FeNi alloy prepared by mechanical milling/alloying : synthesis and characterization /
由: Yusri Adzir
出版: (2010)

Wear of ballised hole surfaces /
由: Tee, Kim Leong
出版: (1993)

Zirconium oxide nanoparticle-reinforced aluminium alloy (AA7075) matrix composites via hot extrusion and equal channel angular pressing
由: Sabbar, Al Rubaiawi Huda Mohammed
出版: (2022)

Microstructure and properties of sintered Co-Cr-Mo alloy powder under different processing conditions
由: Zuraidawani, Che Daud

Role of sulphate on corrosion inhibition of aluminium alloy in acidic environment /
由: Norshamira Mazlan
出版: (2022)

Studies leading to the development of optical fibre aluminium sensors/
由: Musa Ahmad Musa bin Ahmad
出版: (1994)

Dynamic axial and oblique crushing of foam-filled aluminium conical tubes
由: Fauziah, Mat

Synthesis Of Zinc-Aluminium-Hippurate Nanocomposite By Various Methods.
由: Abdul Bahar, Faiza
出版: (2009)

Influence of magnetic field on electrodeposition of NI alloys /
由: Ebadi, Mehdi
出版: (2010)

Effects of CuO and SiO2 as reinforcement in aluminium (AA6061) chips hybrid nanocomposites using hot extrusion process
由: Hussein, Msebawi Muntadher Sabah Abdul
出版: (2022)

Machining wear of cemented carbide insert /
由: Tao, Yuping
出版: (1999)

Influence of magnetic field from permanent magnets on chatter suppression in end milling of titanium alloy (Ti6A14V) /
由: Syidatul Akma binti Sulaiman
出版: (2013)

Laser cladding with nickel-based hardfacing alloys /
由: Qian, Ming
出版: (1996)

Reliability analysis of sliding components /
由: Tang, Loon Ching
出版: (1988)

Corrosion characterization of optimized ZrO2-SiO2 mixed nanotubes coated on aluminium alloy AA3003 /
由: Shalini Devi Ramaiya
出版: (2018)

Pembangunan sistem pengaktifan hibrid anod korbanan aluminium
由: Mohd Subhi, Din Yati

Pencirian nanoaloi A1-Cu yang disediakan denga kaedah aloian mekanik /
由: Ali Oemar, Marjoni Imamora
出版: (2005)

Mapping the wear of cutting tool materials /
由: Lee, Soon Hing
出版: (1992)

Development of aluminium-copper die-attach alloy for high operational temperature application /
由: Siah, Meng Zhe
出版: (2019)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group