Material removal rate and surface roughness in electrical discharge machining of alumina /

Material removal rate and surface roughness in electrical discharge machining of alumina /

Alumina (Al2O3), a non-conductive ceramic material can meet the needs of demand in many engineering applications. Especially in the application of biomedical field it is used due to its excellent physical and chemical properties. But due to high hardness and brittleness, Al2O3 cannot be machined by...

Saved in:

书目详细资料
主要作者:	Moudood, A.H.M. Abdul
格式:	Thesis
语言:	English
出版:	Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2015
主题:	Ceramic materials > Machining Theses, IIUM local
在线阅读:	http://studentrepo.iium.edu.my/handle/123456789/4968
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Generation, acquisition and analysis of machining data for aircraft materials and study of wear while machining these materials /
由: Jeyaseelan, Thomas
出版: (1985)

Special machine design for sculpting foam materials in 3D /
由: Riza Sulaiman
出版: (2004)

Performance evaluation of machine tool structures /
由: Chua, Kah Hock
出版: (1992)

An intelligent fault diagnosis system for machining /
由: Zhou, Qiang
出版: (1996)

Effects of online workpiece preheating on the machinability of hardened steel AISI H13 during end milling and development of prediction models using RSM /
由: Abdullah Mohammad Khalid Hafiz
出版: (2008)

A study on machining characteristics of strontium modifies LM-6 alloy /
由: Hajjaj, Sami Salama
出版: (2007)

An integrated knowledge-based machining system for rotationally symmetric parts /
由: Yeo, Swee Hock
出版: (1992)

CAD integrated machining cost estimation and optimisation /
由: Joseph, Ladislaus A.
出版: (1995)

Finite element analysis of machining /
由: Prabhakaran, Sudheer

Prediction of material removal rate and tool wear rate in electrical discharge machining using feedforward neural network / Zaid Mohd Hanapiah
由: Mohd Hanapiah, Zaid
出版: (2009)

Surface roughness and tool wear aspects in heat assisted high speed ductile mode end milling of soda lime glass /
由: Noor Fathiah binti Mohd Zaib
出版: (2016)

Investigation of the causes of chatter in machine tools and development of a new chatter model /
由: Mohammed Anayet Ullah Patwari
出版: (2010)

Multi objective optimization of high speed end milling of AISI D2 using meta heuristic approach /
由: Seder, Amin M. F.
出版: (2016)

Cost models for comparing room temperature and preheated end-miling of AISI D2 tool steel /
由: Elhadie, Mohamed
出版: (2011)

Machine tool failure analysis using image and signal processing techniques /
由: Ma, Jing
出版: (1998)

A new cost model for high speed hard turning of AISI 4340 steel /
由: al-Hazza, Muataz Hazza Faizi
出版: (2012)

Investigation of surface roughness in wire electrical discharge machining of stainless steel /
由: Mazilah binti Abu Bakar
出版: (2017)

Gap profile model of electrical discharge machining process to predict material removal rate
由: Dehghani, Dana
出版: (2021)

Integrated control mechanism of electrical discharge machining system for higher material removal rate
由: Andromeda, Trias
出版: (2015)

Anggaran parameter pemesinan menggunakan kaedah algoritma genetik /
由: Suhaime Sapari
出版: (2005)

Optimization of cutting parameters for surface roughness in CNC turning machining with aluminum alloy 6061 material
由: Ali Abdullah, Mohammed Ahmed

Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
由: Matoorian, Pooria
出版: (2008)

Pemantauan haus mata alat berasaskan isyarat getaran dan bunyi melalui kaedah analisis Dekomposisi Frekuaensi Fibonacci Z /
由: Muhamad Arif Fadli Ahmad

Optimization of heat-assisted machining process of die steel SKD11 /
由: Salfarina binti Rozeman
出版: (2017)

Preheated machining of AISI D2 hardened steel and optimization of parameters /
由: Mohd Amri bin Lajis
出版: (2010)

Tool condition monitoring for turning by acoustic emission /
由: Bi, Lin Ling
出版: (1996)

A study of the effects of machining parameters on the surface roughness in the turning process / Nor Akram Abdullah
由: Abdullah, Nor Akram
出版: (2010)

Study on machining tungsten carbide with electrical discharge machining (EDM) using Taguchi method / Mohd Rahimatul Azwa Che Rahim
由: Che Rahim, Mohd Rahimatul Azwa
出版: (2009)

Colloidal filtration of alumina-zirconia with solid oxide additives /
由: Wakily, Hakimeh
出版: (2012)

Optimisation of wire electrical discharge machining process using XW41 tool steel material /
由: Mohanadhas Kanagaraj
出版: (2011)

Optimisation of wire electrical discharge machining process using DF2 tool steel material /
由: Cheah, Aik Keong
出版: (2011)

Development of porous alumina-hydroxyapatite composites using protein foaming-consolidation method for biomedical applications /
由: Fadli, Ahmad
出版: (2012)

Improvement of machinability and surface integrity during electro discharge machining of inconel 718 using nano powder suspension dielectric
由: Ahmad, Said
出版: (2016)

Physical and electrical properties of ceramic obtained from white rice husk ash and soda lime silica glass
由: Bateni, Nasim Heidari
出版: (2014)

Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels
由: Idris, Muhammad Ridzuan
出版: (2015)

Effect of Wire Electrical Discharge Machining (WEDM) parameters and additive treatment on surface roughness and dimensional stability of tool steel
由: Chew, Seow Lee
出版: (2013)

Electrical studies on MgO-P[2]O[5] materials sintered at 700[o]c /
由: Revathi Gunasekaran
出版: (2008)

The Evaluation of Machinability and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machining
由: Mohd Daud, Mohd Ahadlin
出版: (2001)

Surface integrity of material machined using Electrical Discharge Machining (EDM) with and without vibration / Aniza Alias
由: Alias, Aniza
出版: (2009)

An analysis of the influence of process variables on surface roughness and surface geometry in the cylindrical grinding process /
由: Chia, Mow Chik
出版: (1988)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group