Multirate digital control system implementation /

The purpose of this study is to investigate and to demonstrate the multirate digital controller through the use of Digital Signal Processor (DSP). The complexity in the multirate controller as well its benefits are presented. The hardware limitations that results when two or more systems of differen...

Full description

Saved in:
Bibliographic Details
Main Author: Ushama, Imama Karim Manba
Format: Thesis
Language:English
Published: Gombak, Selangor : Kuliyyah of Engineering, International Islamic University Malaysia, 2016
Subjects:
Online Access:http://studentrepo.iium.edu.my/handle/123456789/5016
Tags: Add Tag
No Tags, Be the first to tag this record!
LEADER 030030000a22002770004500
008 160408t2016 my a g m 000 0 eng d
040 |a UIAM  |b eng 
041 |a eng 
043 |a a-my--- 
050 0 0 |a TJ223.M53 
100 1 |a Ushama, Imama Karim Manba 
245 1 |a Multirate digital control system implementation /  |c by Imama Karim Manba Ushama. 
260 |a Gombak, Selangor :  |b Kuliyyah of Engineering, International Islamic University Malaysia,  |c 2016 
300 |a xiv, 110 leaves :  |b ill. ;  |c 30cm. 
502 |a Thesis (MSMCT)--International Islamic University Malaysia, 2016. 
504 |a Includes bibliographical references (leaves 99-101). 
520 |a The purpose of this study is to investigate and to demonstrate the multirate digital controller through the use of Digital Signal Processor (DSP). The complexity in the multirate controller as well its benefits are presented. The hardware limitations that results when two or more systems of different bandwidths in a controllable closed control system has been an issue in many fields. This prevents a control algorithm to be operated at the maximum sampling time. Two types of controllers (stable and marginally stable) for multirate system have been designed and implemented. An analysis is done to find an optimal sampling time and the effects of over-sampling as well as under-sampling has been presented. The scope of this work is to explore one type of multirate system only and implement it into two different types of systems, a second order filter and the hard disk drive (HDD). These systems represent a stable and a marginally stable system with two types of controllers being used. Since direct simulation (using Simulink) cannot be used since Simulink is built for single rate system only, a simulation using numerical methods is setup by the author. A prototype of the filter is setup and the controller is tested directly while the HDD is tested using a Hardware in Loop (HIL) method. The experiments are carried out using the DSP. Settling time improvement and steady state error improvement has been achieved by implementing the multirate controller. The improvement depends on the 'N' factor which depends on the sampling time. The application of the multirate controller can be seen in Hard Disk Drives (HDD), Image Processing, and Satellite Systems. 
596 |a 1 
655 7 |a Theses, IIUM local 
690 |a Dissertations, Academic  |x Department of Mechatronics Engineering  |z IIUM 
710 2 |a International Islamic University Malaysia.  |b Department of Mechatronics Engineering 
856 4 |u http://studentrepo.iium.edu.my/handle/123456789/5016 
900 |a sbh-ls 
999 |c 435945  |d 470347 
952 |0 0  |6 T TJ 000223 M53 U85M 2016  |7 0  |8 THESES  |9 760999  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o t TJ 223 M53 U85M 2016  |p 11100345263  |r 2017-10-20  |t 1  |v 0.00  |y THESIS 
952 |0 0  |6 TS CDF TJ 223 M53 U85M 2016  |7 0  |8 THESES  |9 854425  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o ts cdf TJ 223 M53 U85M 2016  |p 11100345264  |r 2017-10-26  |t 1  |v 0.00  |y THESISDIG