Dynamics and control analysis of a non-linear active suspension system using half vehicle model /

The main purpose of vehicle suspension system is to isolate the vehicle main body from any road geometrical irregularities in order to improve the passengers ride comfort and to maintain good handling characteristics subject to different road profile. This dissertation aim at establishing a mathemat...

Full description

Saved in:
Bibliographic Details
Main Author: Bello, Musa Mohammed
Format: Thesis
Language:English
Published: Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2015
Subjects:
Online Access:Click here to view 1st 24 pages of the thesis. Members can view fulltext at the specified PCs in the library.
Tags: Add Tag
No Tags, Be the first to tag this record!
LEADER 032730000a22002770004500
008 150811t2015 my a g m 000 0 eng d
040 |a UIAM  |b eng 
041 |a eng 
043 |a a-my--- 
050 0 0 |a TL235.6 
100 1 |a Bello, Musa Mohammed 
245 1 |a Dynamics and control analysis of a non-linear active suspension system using half vehicle model /  |c by Musa Mohammed Bello 
260 |a Kuala Lumpur :   |b Kulliyyah of Engineering, International Islamic University Malaysia,   |c 2015 
300 |a xvi, 105 leaves :  |b ill. ;  |c 30cm. 
502 |a Thesis (MSMCT)--International Islamic University Malaysia, 2015. 
504 |a Includes bibliographical references (leaves 92-98). 
520 |a The main purpose of vehicle suspension system is to isolate the vehicle main body from any road geometrical irregularities in order to improve the passengers ride comfort and to maintain good handling characteristics subject to different road profile. This dissertation aim at establishing a mathematical model and a control strategy for a nonlinear hydraulically actuated active suspension system. A model of nonlinear, four Degree of Freedom (DOF) half vehicle active suspension system with hydraulic actuator dynamics and a similar nonlinear, four DOF half vehicle passive suspension system model was developed using Matlab/Simulink environment. A control system consisting of two controller loops was also developed, namely inner loop controller for force tracking control of the hydraulic actuator and outer loop controller to resist the effects of road induced disturbances. The outer loop controller employed a proportional integral and differential (PID) control strategy. On the other hand, a proportional integral and differential (PID) force feedback control scheme was employed in the inner loop controller to stabilize the hydraulic actuator in such a way that it is able to supply the actual force as close as possible with the optimum targeted force supplied by the PID controller. Two types of road (discrete and random) inputs were employed and a simulation study using Matlab/Simulink environment was performed to test the effectiveness and robustness of the control scheme. The performance of the active suspension system was assessed by comparing it response to that of passive suspension system. Results obtained shows that, the active suspension system developed a good dynamic response and a better ride comfort when compared to the conventional passive suspension system.  
596 |a 1 
655 7 |a Theses, IIUM local 
690 |a Dissertations, Academic  |x Department of Mechatronics Engineering  |z IIUM 
710 2 |a International Islamic University Malaysia.  |b Department of Mechatronics Engineering 
856 4 |u http://studentrepo.iium.edu.my/handle/123456789/4705  |z Click here to view 1st 24 pages of the thesis. Members can view fulltext at the specified PCs in the library. 
900 |a sbh-ls-naw 
999 |c 436386  |d 469746 
952 |0 0  |6 T TL 000235.6 B446D 2015  |7 0  |8 THESES  |9 760546  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o t TL 235.6 B446D 2015  |p 11100341311  |r 2017-10-20  |t 1  |v 0.00  |y THESIS 
952 |0 0  |6 TS CDF TL 235.6 B446D 2015  |7 0  |8 THESES  |9 853698  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o ts cdf TL 235.6 B446D 2015  |p 11100341312  |r 2017-10-26  |t 1  |v 0.00  |y THESISDIG