Development of a piezoelectric based DC to DC converter for micro energy harvesting system /

Nowadays renewable energy and its harvesting are attractive, because this energy is free which leads to reduce energy cost. One of the common energy harvesting (EH) technique is a piezoelectric based system. But the piezoelectric based technique needs to be improving as this system is highly capacit...

Full description

Saved in:
Bibliographic Details
Main Author: Mostafa, Mohammad Golam
Format: Thesis
Language:English
Published: Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2015
Subjects:
Online Access:http://studentrepo.iium.edu.my/handle/123456789/4555
Tags: Add Tag
No Tags, Be the first to tag this record!
LEADER 033860000a22002770004500
008 170306t2015 my a g m 000 0 eng d
040 |a UIAM  |b eng 
041 |a eng 
043 |a a-my--- 
050 0 0 |a TK7872.P54 
100 1 |a Mostafa, Mohammad Golam  
245 1 |a Development of a piezoelectric based DC to DC converter for micro energy harvesting system /  |c by Mohammad Golam Mostafa 
260 |a Kuala Lumpur :  |b Kulliyyah of Engineering, International Islamic University Malaysia, 2015 
300 |a xvi, 106 leaves :  |b ill. ;  |c 30cm 
502 |a Thesis (MSEE)--International Islamic University Malaysia, 2015. 
504 |a Includes bibliographical references (leaves 96-99). 
520 |a Nowadays renewable energy and its harvesting are attractive, because this energy is free which leads to reduce energy cost. One of the common energy harvesting (EH) technique is a piezoelectric based system. But the piezoelectric based technique needs to be improving as this system is highly capacitive rather than resistive which limits the current of a resistive load. The efficient way to harvest the energy from the system mostly depends on its interfacing circuitry. It is necessary to characterize and optimize the interfacing circuit for maximizing the output power. Piezoelectric transducer (PZT) has a capacitive in nature as a result of low frequency, the harvesting system needs a larger value of inductor for cancelling the capacitive effect. This phenomenon makes the interface circuit bulky. An efficient interfacing circuit has been designed that reduces the inductance by adding a capacitor in parallel with the inherent capacitance of the PZT to increase the overall capacitance in the circuit. The parameters of the circuit which are duty cycle, switching frequency, inductance and load resistance have been characterized and optimized to improve the efficiency of the harvesting system. The developed design is able to work simultaneously as series and parallel resonant converter which reduces the overall inductor value of the circuit. In addition, it improves the impedance isolation between input and output and it also works as a single polarity power supply. By using frequency 13 kHz, duty cycle, 10%, inductance,13.2 µH for 60Ω output load, the maximum power, 280 mW have been obtained. Pspice 16.5 software has been used for simulation purposes. Simulated result has been compared with the closely related work and resulting in power performance efficiency of 47% more has been achieved. The application of harvested energy can be used in embedded sensor in buildings, medical and remote wireless sensor, RFID, biomedical implants, laptops, notepad and so on. 
596 |a 1 
655 7 |a Theses, IIUM local 
690 |a Dissertations, Academic  |x Department of Electrical and Computer Engineering  |z IIUM 
710 2 |a International Islamic University Malaysia.  |b Department of Electrical and Computer Engineering 
856 4 |u http://studentrepo.iium.edu.my/handle/123456789/4555 
900 |a cka-ro 
999 |c 436387  |d 469747 
952 |0 0  |6 T TK 007872 P54 M915D 2015  |7 0  |8 THESES  |9 760547  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o t TK 7872 P54 M915D 2015  |p 11100341313  |r 2017-10-20  |t 1  |v 0.00  |y THESIS 
952 |0 0  |6 TS CDF TK 7872 P54 M915D 2015  |7 0  |8 THESES  |9 853699  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o ts cdf TK 7872 P54 M915D 2015  |p 11100341314  |r 2017-10-26  |t 1  |v 0.00  |y THESISDIG