A study on the circular planform unmanned aerial vehicle /

In this work, aerodynamics investigation of the flow around the circular planform unmanned aerial vehicle (CP-UAV) was carried out numerically and validated with existencing published experimental data. The aircraft uses NACA 4412 airfoil. CD-Adapco STARCCM+ CFD software was used to simulate the flo...

全面介绍

Saved in:
书目详细资料
主要作者: Mohamed Ali Suliman, Suliman Mohamed
格式: Thesis
语言:English
出版: Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2014
主题:
在线阅读:http://studentrepo.iium.edu.my/handle/123456789/4893
标签: 添加标签
没有标签, 成为第一个标记此记录!
LEADER 023040000a22002770004500
008 140915t2014 my a g m 000 0 eng d
040 |a UIAM  |b eng 
041 |a eng 
043 |a a-my--- 
050 0 0 |a TL570 
100 1 |a Mohamed Ali Suliman, Suliman Mohamed 
245 1 2 |a A study on the circular planform unmanned aerial vehicle /  |c by Suliman Mohamed Mohamed Ali Suliman 
260 |a Kuala Lumpur :   |b Kulliyyah of Engineering, International Islamic University Malaysia,   |c 2014 
300 |a xvi, 95 leaves :  |c 30cm. 
502 |a Thesis (MSME)--International Islamic University Malaysia, 2014. 
504 |a Includes bibliographical references (leaves 93-94). 
520 |a In this work, aerodynamics investigation of the flow around the circular planform unmanned aerial vehicle (CP-UAV) was carried out numerically and validated with existencing published experimental data. The aircraft uses NACA 4412 airfoil. CD-Adapco STARCCM+ CFD software was used to simulate the flow. The simulations were carried out for three dimensional flows around CP-UAV to analysze the viscous flow behavior and aerodynamics coefficients such as boundary layer thickness, velocity vector contour, pressure distribution, streamlines, lift and drag coefficients. Three dimensional simulation was started with generating CATIA 3Ddrawing and exported to STAR-CCM+ for meshing. The numerical results of lift drag and moments coefficients were compared to experimental data. The qualitative comparison has shown acceptable good agreement. Finally, the study has shown that the CP-UAV is more stable and better aerodynamic characteristics than the conventional aircraft. 
596 |a 1 
655 7 |a Theses, IIUM local 
690 |a Dissertations, Academic  |x Department of Mechanical Engineering  |z IIUM 
710 2 |a International Islamic University Malaysia.  |b Department of Mechanical Engineering 
856 4 |u http://studentrepo.iium.edu.my/handle/123456789/4893 
900 |a sbh-zaj-ls 
999 |c 436499  |d 467331 
952 |0 0  |6 T TL 000570 M697S 2014  |7 0  |8 THESES  |9 759915  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o t TL 570 M697S 2014  |p 11100334655  |r 2017-10-20  |t 1  |v 0.00  |y THESIS 
952 |0 0  |6 TS CDF TL 570 M697S 2014  |7 0  |8 THESES  |9 852706  |a IIUM  |b IIUM  |c MULTIMEDIA  |g 0.00  |o ts cdf TL 570 M697S 2014  |p 11100334656  |r 2017-10-26  |t 1  |v 0.00  |y THESISDIG