Vault's floor security sensor with RFID access using microcontroller/ Mohd Firdouz Bahtiar
Precious items like money, jewelry and expensive antiques are usually kept in a vault or at home. Whether it is a bank or at home, security has been the number one priority to keep each and every item safe from theft. Although, most hi-tech security systems are expensive, the fact that it actually...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/102664/1/102664.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Precious items like money, jewelry and expensive antiques are usually kept in a vault or at home. Whether it is a bank or at home, security has been the number one priority to keep each and every item safe from theft. Although, most hi-tech security systems are expensive, the fact that it actually runs on simple mechanism such as sensors for input and some interface to communicate with the consumer i.e: an LCD display, makes it probable for a low cost security sytem to be produced with the same hi-tech effects. A solution to these problems is to design an embedded system that provides an application of RFID for access and a photo sensor for the guarding system that runs on low power and at a lower cost to compare to the commercialize security sensor. The design is just a module to demonstrate the basic function of the floor security sytem that will be observed by the PIC16f877a microcontroller by Microchip. The embedded system automation will be made at such a low cost but demonstrates the same functionality as the commercialize security system. This paper describe an application of RFID for access whereby the system provides security surveillance towards a certain designated ground or floor. Users will be given the RFID smartcard for the access pass identity, the designated floor will then be armed with a source of light ( laser pointer ) and an LCD as indicator should any message will be given to the user. The system uses a microcontroller for the simple algorithm of the signal processing. The algorithm for the RFID access and the security sensor was performed on a commercial software to control the microcontroller and interfacing circuits. |
|---|