Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad

This project investigated the development of the weld zone in resistance spot welding (RSW) on similar and dissimilar material using various statistical methods and numerical simulation approach. Demands placed on dissimilar material joints have increased from various viewpoint such as lightweight v...

Full description

Saved in:

Bibliographic Details
Main Author:	Muhammad, Norasiah
Format:	Thesis
Language:	English
Published:	2015
Subjects:	Welding
Online Access:	https://ir.uitm.edu.my/id/eprint/16263/1/TP_NORASIAH%20MUHAMMAD%20EM%2015_5.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.16263
record_format	uketd_dc
spelling	my-uitm-ir.162632022-03-09T04:47:55Z Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad 2015 Muhammad, Norasiah Welding This project investigated the development of the weld zone in resistance spot welding (RSW) on similar and dissimilar material using various statistical methods and numerical simulation approach. Demands placed on dissimilar material joints have increased from various viewpoint such as lightweight vehicle structure, energy saving, high performance and cost saving. Due to steadily increasing price of material, a combination between DP 600 and low carbon steel can be seen as an alternative especially for the section which is not fully exposed to external load. Therefore, the RSW process on dissimilar material of DP 600 and low carbon steel is necessarily to be observed for mass production. For comparison purpose, this research was conducted for plate thickness of 1.2 mm of low carbon steel and 1.0 mm of DP600. In order to reduce the trial and error experiments, statistical methods were used throughout the investigation. An experimental design was started using a general 24 factorial design to determine which of the various parameters were important in response surface study. The significance of the welding parameters was obtained using Analysis of Variance (ANOVA) to evaluate the relations existing between the important parameters and the response (radius of weld nugget and radius of HAZ). Optimization of the welding parameters (weld current, weld time and electrode force) to normalize weld nugget and to minimize HAZ size was then conducted using Central Composite Design (CCO) in Response Surface Methodology (RSM) and the optimum parameters were determined. Experiments were conducted according to the selected experimental design, followed by data analysis which included regression analysis and model adequacy checking. A quadratic model for radius of weld nugget and radius of HAZ as a function of the significant parameters were developed for all the combined metal sheets. A second order models were found fitted and can be effectively used to predict the size of weld zone within the factors domain study. Further, the optimization of multi-response (nominal-the-best for radius of weld nugget and smaller-the-better for radius of HAZ) were obtained simultaneously using desirability approach. The confirmation tests validated the use of multi-response optimization for enhancing the welding performance and optimizing the welding parameters in RSW process. The experimental obtained under the optimum operating conditions and the predicted one was found to agree satisfactorily with each other. The optimum parameters obtained from multi-response optimization was applied in the simulation process. A two dimensional axis-symmetric finite element model using customized electrode meshing was chosen to develop the thermal-mechanical-electrical characteristic of the RSW based on the actual electrode dimension. The development of the weld zone was investigated using finite element method (FEM) of SYSWELD and the results were compared with experimental measurement. It was found that the result of FEM presents a theoretically accurate correlation with that of experiments in terms of radius weld nugget as well as HAZ developed. 2015 Thesis https://ir.uitm.edu.my/id/eprint/16263/ https://ir.uitm.edu.my/id/eprint/16263/1/TP_NORASIAH%20MUHAMMAD%20EM%2015_5.pdf text en public phd doctoral Universiti Teknologi MARA Faculty of Mechanical Engineering
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
topic	Welding
spellingShingle	Welding Muhammad, Norasiah Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
description	This project investigated the development of the weld zone in resistance spot welding (RSW) on similar and dissimilar material using various statistical methods and numerical simulation approach. Demands placed on dissimilar material joints have increased from various viewpoint such as lightweight vehicle structure, energy saving, high performance and cost saving. Due to steadily increasing price of material, a combination between DP 600 and low carbon steel can be seen as an alternative especially for the section which is not fully exposed to external load. Therefore, the RSW process on dissimilar material of DP 600 and low carbon steel is necessarily to be observed for mass production. For comparison purpose, this research was conducted for plate thickness of 1.2 mm of low carbon steel and 1.0 mm of DP600. In order to reduce the trial and error experiments, statistical methods were used throughout the investigation. An experimental design was started using a general 24 factorial design to determine which of the various parameters were important in response surface study. The significance of the welding parameters was obtained using Analysis of Variance (ANOVA) to evaluate the relations existing between the important parameters and the response (radius of weld nugget and radius of HAZ). Optimization of the welding parameters (weld current, weld time and electrode force) to normalize weld nugget and to minimize HAZ size was then conducted using Central Composite Design (CCO) in Response Surface Methodology (RSM) and the optimum parameters were determined. Experiments were conducted according to the selected experimental design, followed by data analysis which included regression analysis and model adequacy checking. A quadratic model for radius of weld nugget and radius of HAZ as a function of the significant parameters were developed for all the combined metal sheets. A second order models were found fitted and can be effectively used to predict the size of weld zone within the factors domain study. Further, the optimization of multi-response (nominal-the-best for radius of weld nugget and smaller-the-better for radius of HAZ) were obtained simultaneously using desirability approach. The confirmation tests validated the use of multi-response optimization for enhancing the welding performance and optimizing the welding parameters in RSW process. The experimental obtained under the optimum operating conditions and the predicted one was found to agree satisfactorily with each other. The optimum parameters obtained from multi-response optimization was applied in the simulation process. A two dimensional axis-symmetric finite element model using customized electrode meshing was chosen to develop the thermal-mechanical-electrical characteristic of the RSW based on the actual electrode dimension. The development of the weld zone was investigated using finite element method (FEM) of SYSWELD and the results were compared with experimental measurement. It was found that the result of FEM presents a theoretically accurate correlation with that of experiments in terms of radius weld nugget as well as HAZ developed.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Muhammad, Norasiah
author_facet	Muhammad, Norasiah
author_sort	Muhammad, Norasiah
title	Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
title_short	Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
title_full	Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
title_fullStr	Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
title_full_unstemmed	Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
title_sort	model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse doe and fem / norasiah muhammad
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Mechanical Engineering
publishDate	2015
url	https://ir.uitm.edu.my/id/eprint/16263/1/TP_NORASIAH%20MUHAMMAD%20EM%2015_5.pdf
_version_	1783733492852457472

Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad

Similar Items