Shape optimization of cantilever beam / Hamdan Abd Hamid
Shape optimization is the determination of the boundary which best meets the design criteria, while simultaneously satisfying design constraints. In this research, shape optimization of a cantilever beam is a process to obtain the optimum shape of the beam while the stress and deflection are within...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2005
|
| 主題: | |
| 在線閱讀: | https://ir.uitm.edu.my/id/eprint/21128/1/TD_HAMDAN%20ABD%20HAMID%20EM%2005_5.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Shape optimization is the determination of the boundary which best meets the design criteria, while simultaneously satisfying design constraints. In this research, shape optimization of a cantilever beam is a process to obtain the optimum shape of the beam while the stress and deflection are within the design constraints (design requirement). For shape optimization of a cantilever beam the objective function to be minimized is its total volume, the design variable is its thickness and the state variable to be constrained is stress and deflection. ANSYS software was used for conducting shape optimization process. During optimization, stresses and displacements were obtained using ANSYS finite element model. For that purpose finite element module was set up together with the optimization parameters. The final result of shape optimization from ANSYS were obtained using the Subproblem Method and First Order Method. For Subproblem Method the optimum total volume value is 3.6156 in³ at the iteration number twelve and for First Order Method the optimum total volume is 3.609 in³ at the iteration number fifteen. |
|---|