Effect of loading rates on fracture toughness of HDPE / Hassnol Ishraff Mohd Yusof
The objective of this project is to examine or to study the effect of various loading rates applied to a High Density Polyethylene (HDPE). Two types of tests have been conducted. For the Quasi-static test, the experiment states a method for determining the opening mode plane strain fracture toughnes...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2002
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/21304/1/TD_HASSNOL%20ISHRAFF%20MOHD%20YUSOF%20EM%2002_5.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The objective of this project is to examine or to study the effect of various loading rates applied to a High Density Polyethylene (HDPE). Two types of tests have been conducted. For the Quasi-static test, the experiment states a method for determining the opening mode plane strain fracture toughness (Kɪᴄ) and the critical crack tip opening displacement (CTOD) fracture toughness. The method uses the fatigue precracked specimens These are tested in controlled mono tonic loading at a constant rate in stress intensity factor within the range 0.5 MPa.m⁰·⁵s¯¹ during the initial elastic deformation. The machine used for the testing is ‘Instrons Model 4260 Screwdriver’ testing machine. The testing apparatus is called a ‘three point bend test’. In addition, the specimen’s Young modulus (E) and Poisson’s Ratio (v) must be calculated by conducting a tensile test. The specimen used for the tensile test is HDPE dog hone tensile specimen. In High rate speed loading test,we want to determine Kɪᴄ . the critical stress intensity factor and energy release rate at various impact velocities on HDPE (high density polyethylene) at room temperature. The machine used for the testing is ESH single shot (testing) machine. The speed can reach up to 20 m/s. Theoretically, the HDPE behaves in brittle manner after the testing. |
|---|