Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon
This project entitled "Investigation on The Effect of Brake fluid Fade on Brake Line Pressure". The purpose of the project was to determine the performance of the brake fluid with different water contamination level. In this project analysis, two parameters or properties of the brake fluid...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2009
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/30902/1/30902.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-uitm-ir.30902 |
---|---|
record_format |
uketd_dc |
spelling |
my-uitm-ir.309022020-06-03T07:55:44Z Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon 2009 Luat Gon, Deaby Bending Power resources Internal combustion engines. Spark ignition This project entitled "Investigation on The Effect of Brake fluid Fade on Brake Line Pressure". The purpose of the project was to determine the performance of the brake fluid with different water contamination level. In this project analysis, two parameters or properties of the brake fluid need to be determine which are braking pressure and its boiling point. Two experiments were conducted to get the boiling point and braking pressure of the brake fluid. In the first experiment, the brake fluid with different water contamination in term of percentage of water content heated up until boiling. The relation between the boiling point of the brake fluid and the percentage of water content was established. The brake line pressure was measured by driving the car at 30 km/h on dynamometer. When the car slightly exceeds 30 km/h, brake was applied. Continuously additional brake force was exerted to the brake pedal in order to maintain the speed at 30km/h. During this time, the throttle was maintained at the same position. The brake force was read after 5 minutes. Test were carried out using Perodua Myvi and the brake system is using the original equipment brake fluid (DOT3). Functionality test on the brake system was carries before testing to ensure that the brake is in good working condition, hence to ensure good repeatability and accuracy of the measurement. From the results it was observed that when the boiling point decreased linearly with the percentage of water contaminated in the brake, fluid. The braking force was increased with the incremental percentage of water in the brake fluid. The conclusion from this project was the performance of the brake fluid decrease when the brake fluid fade. 2009 Thesis https://ir.uitm.edu.my/id/eprint/30902/ https://ir.uitm.edu.my/id/eprint/30902/1/30902.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Kasiran, Ramlan |
institution |
Universiti Teknologi MARA |
collection |
UiTM Institutional Repository |
language |
English |
advisor |
Kasiran, Ramlan |
topic |
Bending Power resources Bending |
spellingShingle |
Bending Power resources Bending Luat Gon, Deaby Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
description |
This project entitled "Investigation on The Effect of Brake fluid Fade on Brake Line Pressure". The purpose of the project was to determine the performance of the brake fluid with different water contamination level. In this project analysis, two parameters or properties of the brake fluid need to be determine which are braking pressure and its boiling point. Two experiments were conducted to get the boiling point and braking pressure of the brake fluid. In the first experiment, the brake fluid with different water contamination in term of percentage of water content heated up until boiling. The relation between the boiling point of the brake fluid and the percentage of water content was established. The brake line pressure was measured by driving the car at 30 km/h on dynamometer. When the car slightly exceeds 30 km/h, brake was applied. Continuously additional brake force was exerted to the brake pedal in order to maintain the speed at 30km/h. During this time, the throttle was maintained at the same position. The brake force was read after 5 minutes. Test were carried out using Perodua Myvi and the brake system is using the original equipment brake fluid (DOT3). Functionality test on the brake system was carries before testing to ensure that the brake is in good working condition, hence to ensure good repeatability and accuracy of the measurement. From the results it was observed that when the boiling point decreased linearly with the percentage of water contaminated in the brake, fluid. The braking force was increased with the incremental percentage of water in the brake fluid. The conclusion from this project was the performance of the brake fluid decrease when the brake fluid fade. |
format |
Thesis |
qualification_level |
Bachelor degree |
author |
Luat Gon, Deaby |
author_facet |
Luat Gon, Deaby |
author_sort |
Luat Gon, Deaby |
title |
Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
title_short |
Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
title_full |
Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
title_fullStr |
Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
title_full_unstemmed |
Investigation on the effect of brake fluid fade on brake line pressure / Deaby Luat Gon |
title_sort |
investigation on the effect of brake fluid fade on brake line pressure / deaby luat gon |
granting_institution |
Universiti Teknologi MARA |
granting_department |
Faculty of Mechanical Engineering |
publishDate |
2009 |
url |
https://ir.uitm.edu.my/id/eprint/30902/1/30902.pdf |
_version_ |
1783734091718328320 |