Experimental investigation into convective heat transfer of nanofluid at the entrance region under laminar flow conditions / Mohammad Firdaus Che Mat
Nanofluids are suspensions of metallic or nonmetallic nanopowders in base liquid and can be used to increase heat transfer rate in various applications. Because ofits enhanced h~at transfer capability as compared to normal based fluids such as water, its was offered the engineer opportunities for de...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/30949/1/30949.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Nanofluids are suspensions of metallic or nonmetallic nanopowders in base liquid and can be used to increase heat transfer rate in various applications. Because ofits enhanced h~at transfer capability as compared to normal based fluids such as water, its was offered the engineer opportunities for development in heat transfer and thermodynamic areas. This project reports an experimental investigation of work on the convective heat transfer ofnanofluids flowing through a copper tube in the laminar flow regime compare with water. The nanopartic1es that use in this experiment was made of Aluminium Nitrate (A1(N03)3.9H20) and Tin Chloride Hydrated (SnCh). These nanoparaticles is then mixed with water (H2O). Experimental results proved that the enhancement of heat transfer coefficient is due to the nanopartic1es present in the fluid. Heat transfer coefficient increases by increasing the concentration of nanopartic1es in nanofluid which use 0.6% vol,l.O% vol and 1.6%vol of water. The use of the nanopartic1es that mixed with water can significantly enhance the convective heat transfer in the laminar flow regime. The increase in heat transfer coefficient due to present of nanopartic1es is much higher than the prediction of single phase heat transfer correlation used with nanofluid properties. |
|---|