Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.

The purpose of this project is to investigate and understanding the advantages and disadvantages of flux core arc welding process. The investigation is done by performing flat groove (1G), horizontal groove (2G) and vertical groove (3G). This study consist two steps. The first step was to get the va...

Full description

Saved in:

Bibliographic Details
Main Author:	Amat, Ali Firdauz
Format:	Thesis
Language:	English
Published:	2009
Subjects:	Machine shops and machine shop practice Machine design and drawing Machine construction (General)
Online Access:	https://ir.uitm.edu.my/id/eprint/31143/1/31143.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.31143
record_format	uketd_dc
spelling	my-uitm-ir.311432020-06-15T03:17:06Z Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat. 2009 Amat, Ali Firdauz Machine shops and machine shop practice Machine design and drawing Machine construction (General) The purpose of this project is to investigate and understanding the advantages and disadvantages of flux core arc welding process. The investigation is done by performing flat groove (1G), horizontal groove (2G) and vertical groove (3G). This study consist two steps. The first step was to get the variables for the voltage, current, travel speed and wire feed rate. This variable was obtained by performing IF (flat position). The parameters were set by referring the AWS (American Welding Society) standard hand book, section 3B. Next step was establishing the test for each welding specimen by using NDT (Non Destructive Test) and DT (Destructive Test). These test is to observe either they are failed or passed. All the testing was referred to AWS standard, Dl.l (2004). The FCAW parameters was presented in this project which more focusing on the critical position such as vertical and horizontal compare to flat. Through out this study, the finding of variables such as voltage, current, wire feed rate and travel speed can helps in order to develop a new model design for research and development. As conclusion, the development of this study was very courage. However, further works need to be cover in future where this process should be carried out on the others materials for example stainless steel. 2009 Thesis https://ir.uitm.edu.my/id/eprint/31143/ https://ir.uitm.edu.my/id/eprint/31143/1/31143.pdf text en public degree Universiti Teknologi MARA Shah Alam Faculty of Mechanical Engineering Manurung, Yupiter HP (Dr. Ing.)
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Manurung, Yupiter HP (Dr. Ing.)
topic	Machine shops and machine shop practice Machine design and drawing Machine construction (General)
spellingShingle	Machine shops and machine shop practice Machine design and drawing Machine construction (General) Amat, Ali Firdauz Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
description	The purpose of this project is to investigate and understanding the advantages and disadvantages of flux core arc welding process. The investigation is done by performing flat groove (1G), horizontal groove (2G) and vertical groove (3G). This study consist two steps. The first step was to get the variables for the voltage, current, travel speed and wire feed rate. This variable was obtained by performing IF (flat position). The parameters were set by referring the AWS (American Welding Society) standard hand book, section 3B. Next step was establishing the test for each welding specimen by using NDT (Non Destructive Test) and DT (Destructive Test). These test is to observe either they are failed or passed. All the testing was referred to AWS standard, Dl.l (2004). The FCAW parameters was presented in this project which more focusing on the critical position such as vertical and horizontal compare to flat. Through out this study, the finding of variables such as voltage, current, wire feed rate and travel speed can helps in order to develop a new model design for research and development. As conclusion, the development of this study was very courage. However, further works need to be cover in future where this process should be carried out on the others materials for example stainless steel.
format	Thesis
qualification_level	Bachelor degree
author	Amat, Ali Firdauz
author_facet	Amat, Ali Firdauz
author_sort	Amat, Ali Firdauz
title	Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
title_short	Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
title_full	Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
title_fullStr	Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
title_full_unstemmed	Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.
title_sort	investigation of welding parameters towards high quality products by using flux core arc welding (fcaw) / ali firdauz amat.
granting_institution	Universiti Teknologi MARA Shah Alam
granting_department	Faculty of Mechanical Engineering
publishDate	2009
url	https://ir.uitm.edu.my/id/eprint/31143/1/31143.pdf
_version_	1783734103054483456

Investigation of welding parameters towards high quality products by using flux core arc welding (FCAW) / Ali Firdauz Amat.

Similar Items