Simulation study of welding joint by using SYSWELD / Mohd Shahar Sulaiman
In this study, the distortion of multipasses welding have been analysed using Finite Element Analy-sis (FEA) simulation method. Due to the extensive capabilities and dedicated tools for the simula-tion of welding, which include material deposit via element activation or deactivation and prede-fined...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2009
|
| 主題: | |
| 在線閱讀: | https://ir.uitm.edu.my/id/eprint/31284/1/31284.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | In this study, the distortion of multipasses welding have been analysed using Finite Element Analy-sis (FEA) simulation method. Due to the extensive capabilities and dedicated tools for the simula-tion of welding, which include material deposit via element activation or deactivation and prede-fined or customized moving heat sources, SYSWELD was chosen as the FEA software. Compared to other FEA software SYSWELD is design specifically for welding process and it is hope that by using SYSWELD the behavior of multipasses welding process can be predicted. The simulation be-gins with the selection of heat source model represented by the Goldak's double ellipsoid model which is within the code. The parameters of this model were defined by the welding speed, electri-cal power, type of the material and thickness of the material being used. The model is dedicated for multipasses welding techniques using Gas Metal Arc Welding (GMAW) process which is commonly applied in fabrication industry. The SYSWELD software is used to simulate GMAW process on mild steel plates through butt joint. The study describes the heat source fitting, mechanical and thermal analyses of the multipasses welding. The study also been done to investigate the step by step methodology of multipasses welding analysis. The optimum process parameters especially clamping conditions for the multipasses welding process will be investigated to minimize distortion. |
|---|