Design and simulation of a 3D wing box test rig for static test / Leonard Langking
Generally, this project is about designing a 3D Wing Box Test rig for static test using solid modelling computer software. Wing box test rig was invented for testing wing structure. The test rig is to hold the wing in place and keep them cantilevered so that the load on the wings doesn't affect...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/35709/1/35709.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-uitm-ir.35709 |
---|---|
record_format |
uketd_dc |
spelling |
my-uitm-ir.357092020-10-27T02:24:24Z Design and simulation of a 3D wing box test rig for static test / Leonard Langking 2010 Langking, Leonard Programming. Rule-based programming. Backtrack programming Operating systems (Computers) Generally, this project is about designing a 3D Wing Box Test rig for static test using solid modelling computer software. Wing box test rig was invented for testing wing structure. The test rig is to hold the wing in place and keep them cantilevered so that the load on the wings doesn't affect the rig. The test will be done on computer using CAD software. The software used is CATIA. The scope of this project is to design a 3D wing box test rig for static test. The design must meet the requirements given or a strong test rig that can withstand the load of wing. The CATIA software is used to design and do the simulation on the test rig. The design process and simulation in this project is done mostly using the CATIA software. The result will be obtained by improving the initial design and choosing the most suitable design. The project will be complemented with project that is the finite element analysis on the wing box test rig design. This is the analysis of load requirement analysis on the test rig. Besides that for future, student can use this design to fabricate a wing box test rig that will be use for static test. The engineering analysis on materials is done through calculation by referring to the theoretical values and formulas. The parameters taken from this engineering analysis will be applied on the CATIA software in the analysis and simulation of the design. The output of this project is a design and simulation of a 3D wing box test rig for static test that used a material of hollow box and C beam mild steel as the main component. The design will meet the requirements of factor of safety in the range of 1.2 to 2.5 and can withstand the maximum load of 50 KN. 2010 Thesis https://ir.uitm.edu.my/id/eprint/35709/ https://ir.uitm.edu.my/id/eprint/35709/1/35709.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Ramly, Ramzyzan |
institution |
Universiti Teknologi MARA |
collection |
UiTM Institutional Repository |
language |
English |
advisor |
Ramly, Ramzyzan |
topic |
Programming Rule-based programming Backtrack programming Operating systems (Computers) |
spellingShingle |
Programming Rule-based programming Backtrack programming Operating systems (Computers) Langking, Leonard Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
description |
Generally, this project is about designing a 3D Wing Box Test rig for static test using solid modelling computer software. Wing box test rig was invented for testing wing structure. The test rig is to hold the wing in place and keep them cantilevered so that the load on the wings doesn't affect the rig. The test will be done on computer using CAD software. The software used is CATIA. The scope of this project is to design a 3D wing box test rig for static test. The design must meet the requirements given or a strong test rig that can withstand the load of wing. The CATIA software is used to design and do the simulation on the test rig. The design process and simulation in this project is done mostly using the CATIA software. The result will be obtained by improving the initial design and choosing the most suitable design. The project will be complemented with project that is the finite element analysis on the wing box test rig design. This is the analysis of load requirement analysis on the test rig. Besides that for future, student can use this design to fabricate a wing box test rig that will be use for static test. The engineering analysis on materials is done through calculation by referring to the theoretical values and formulas. The parameters taken from this engineering analysis will be applied on the CATIA software in the analysis and simulation of the design. The output of this project is a design and simulation of a 3D wing box test rig for static test that used a material of hollow box and C beam mild steel as the main component. The design will meet the requirements of factor of safety in the range of 1.2 to 2.5 and can withstand the maximum load of 50 KN. |
format |
Thesis |
qualification_level |
Bachelor degree |
author |
Langking, Leonard |
author_facet |
Langking, Leonard |
author_sort |
Langking, Leonard |
title |
Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
title_short |
Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
title_full |
Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
title_fullStr |
Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
title_full_unstemmed |
Design and simulation of a 3D wing box test rig for static test / Leonard Langking |
title_sort |
design and simulation of a 3d wing box test rig for static test / leonard langking |
granting_institution |
Universiti Teknologi MARA |
granting_department |
Faculty of Mechanical Engineering |
publishDate |
2010 |
url |
https://ir.uitm.edu.my/id/eprint/35709/1/35709.pdf |
_version_ |
1783734313501589504 |