Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz

Dynamic characterization of Laminated Kenaf Fiber Composites with Delamination using Experimental Modal Analysis / Asymawi Abd Aziz

The project is carried out to understand the dynamic characterization such as natural frequencies, damping ratio and mode shapes of Laminated Kenaf Fiber Composites with Delamination by using Experimental Modal Analysis (EMA). In experiments, the sample subjected to force is laminated Kenaf Fiber co...

Saved in:

書目詳細資料
主要作者:	Abd Aziz, Asymawi
格式:	Thesis
語言:	English
出版:	2010
主題:	Mechanics applied to machinery Dynamics
在線閱讀:	https://ir.uitm.edu.my/id/eprint/36397/1/36397.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Post impact fatigue of kenaf powder, PP, MAPP laminated with kevlar hybrid composites / Siti Norain Manan.
由: Manan, Siti Norain
出版: (2009)

Computational fluid dynamics simulation using model from building information modeling software / Muhammad Khalid Che Abd Aziz
由: Che Abd Aziz, Muhammad Khalid
出版: (2021)

Rheological behaviors and mechanical properties of kenaf-polypropylene composites / Amirul Hafiz Johari
由: Johari, Amirul Hafiz
出版: (2010)

Post impact fatigue of fibre metal laminate (FML) / Abdul Adzim Abdul Mubin.
由: Abdul Mubin, Abdul Adzim
出版: (2009)

Three tanks water level monitoring system (hardware development)/ Zuhairi Ghazali
由: Ghazali, Zuhairi
出版: (1999)

Numerical simulation and experimental verification on distortions induced by wire-arc additive manufacturing components and costing analysis / Keval Priapratama Prajadhiana
由: Prajadhiana, Keval Priapratama
出版: (2024)

Computer simulation and turbine development for free flowing water generator / Mohd Ridhwan Hizami Abd Rashid
由: Abd Rashid, Mohd Ridhwan Hizami
出版: (2010)

Response of dynamic wave for stress impact on semi-SWATH / Ammar Asyraf Ahmad Azam
由: Ahmad Azam, Ammar Asyraf
出版: (2010)

The effect of progressive crack on dynamic properties of tapered beam using EMA / Mohd Hafiz Zaini
由: Zaini, Mohd Hafiz
出版: (2010)

Transfer matrix method for identifying the dynamic characteristics of an exhaust system / Muhamad Norhisham Abdul Rani
由: Abdul Rani, Muhamad Norhisham
出版: (2008)

Investigation on the effect of Kenaf dust on mechanical properties of automotive brake pad / Ruzanna Inani Zaharim
由: Zaharim, Ruzanna Inani
出版: (2010)

Study on drilling parameters using high speed steel (HSS) and cobalt tools cutter / Fadhirul Azreen Hishamuddin.
由: Hishamuddin, Fadhirul Azreen
出版: (2009)

Wave effect on bulk carrier structure / Mohammad Arif Jawahir
由: Jawahir, Mohammad Arif
出版: (2006)

Development of a gearing mechanism for a robotic finger / Hamzah Ab Wahab
由: Ab Wahab, Hamzah
出版: (2011)

Process optimization to reduce draw stage for an automotive stamped part / Muhammad Faisal Mohd Latafi
由: Mohd Latafi, Muhammad Faisal
出版: (2011)

Study on tower crane / Nurul Hayati Abdul Halim … [et al.]
由: Abdul Halim, Nurul Hayati, et al.
出版: (2003)

The acceptance of Computerized Maintenance Management System (CMMS) implementation in building Facilities Management (FM): a case study / Syamsyeer Moohammad Musa.
由: Moohammad Musa, Syamsyeer
出版: (2016)

Development of air pollution monitoring system / Clive Allen Williams-Hunt
由: Williams-Hunt, Clive Allen
出版: (2009)

Degradation and wear analysis of automatic transmission fluid (ATF) of 1.3l automatic transmission (AT) vehicle / Syazuan Abdul Latip
由: Abdul Latip, Syazuan
出版: (2014)

Classification of transient disturbance using Wavelet based support vector machine / Fahteem Hamamy Anuwar
由: Anuwar, Fahteem Hamamy
出版: (2012)

Effect of different dielectrics and work piece vibration on electrical discharge machining (EDM) / Norliana Mohd Abbas
由: Mohd Abbas, Norliana
出版: (2008)

Modelling delaminations at free edges of laminated composites /
由: Amrutharaj, G.
出版: (1995)

Evaluation on torsion test method for composite materials / Muhamad Zulhilmi Mohd Adnan
由: Mohd Adnan, Muhamad Zulhilmi
出版: (2010)

TiH₂ microporous replication pseudo-elastic NiTi alloy by metal injection moulding / Ros Atikah Abdul Kadir
由: Abdul Kadir, Ros Atikah
出版: (2017)

Finite element analysis of delamination and failure in laminated composites /
由: Shen, Feng
出版: (2000)

CFD and wind tunnel testing for a rear car spoiler / Ahmad Azlan Asri
由: Asri, Ahmad Azlan
出版: (2010)

Preparation of Cu-Zn based catalysts via ultrasonic spray precipitation method for methanol synthesis / Muhammad Zahiruddin Ramli
由: Ramli, Muhammad Zahiruddin
出版: (2019)

Numerical analysis on the effect of built form in urban ventilation assessment / Mohd Azhari Mohd Rodzi
由: Mohd Rodzi, Mohd Azhari
出版: (2016)

Primary design air compressor for force induction engine to be replace turbocharger or supercharger system / Ahmad Fathan M Saleh @ Mohd Nawi
由: M Saleh @ Mohd Nawi, Ahmad Fathan
出版: (2006)

A 3kW water-cooled Proton Electrolyte Membrane Fuel Cell (PEMFC) thermal performance analysis / Shahir Sabtu
由: Sabtu, Shahir
出版: (2010)

Optimization of cutting parameter for the drilling of medium density fiberboard / Muhammad Azhanudin Borhan
由: Borhan, Muhammad Azhanudin
出版: (2010)

Rheological and mechanical properties of Yttria Stabilized Zirconia (YSZ) produced by ceramic injection moulding / Mahfuzah Zainudin
由: Zainudin, Mahfuzah
出版: (2017)

Effect of NACA 0010 airfoil car spoiler towards downforce and drag force / Muhammad Azraai Ahmad Fisal
由: Ahmad Fisal, Muhammad Azraai
出版: (2013)

Effects of material and infill density towards adjustable headrest orthosis development based on 3D printing technology / Madya Mastika Ahmad
由: Ahmad, Madya Mastika
出版: (2020)

Surface integrity of material machined using Electrical Discharge Machining (EDM) with and without vibration / Aniza Alias
由: Alias, Aniza
出版: (2009)

The study on factors affecting corrosion resistance of stainless steel / Alyani Basharuddin
由: Basharuddin, Alyani
出版: (2010)

Software development of welding procedure specification for flux cored arc welding / Huzaymi Zamri.
由: Zamri, Huzaymi
出版: (2006)

Delamination damage of carbon fiber-reinforced polymer composite laminates under cyclic shear-induced loading conditions
由: Abdullah, Muhammad A’imullah
出版: (2018)

Development of composite panels for short span bridge construction using indigenous agro - based resources: Fabrication and mechanical testing / Ahmad Hussein Abdul Hamid
由: Abdul Hamid, Ahmad Hussein
出版: (2005)

Stress analysis of riveted and bonded patch repairs on a stiffened panel / Ramzyzan Ramly
由: Ramly, Ramzyzan
出版: (2005)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group