Fiber optic lighting system / Muhammad Firdaus Maidin

Solar lighting can be considered as a very promising technology to be used for an energy efficient green building in order to reduce the energy consumption and also help to maintain the environment. The aim of this study is to determine whether the solar fiber optic using PMMA cable can be built as...

Full description

Saved in:
Bibliographic Details
Main Author: Maidin, Muhammad Firdaus
Format: Thesis
Language:English
Published: 2010
Subjects:
Online Access:https://ir.uitm.edu.my/id/eprint/36777/1/36777.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Solar lighting can be considered as a very promising technology to be used for an energy efficient green building in order to reduce the energy consumption and also help to maintain the environment. The aim of this study is to determine whether the solar fiber optic using PMMA cable can be built as an energy efficient using a low cost parabolic reflector. This research is to measure the capabilities of using the fiber optic lighting system in Malaysia within the condition of weather changes and cloudy environment. Using the 1-axis sun tracking device and using the parabolic reflection to concentrated the sunlight into the single fiber optic with radius of 10mm as a lighting system. The system is installed and put at the top floor of the Science and Technology building and the luminance is recorded for each hour for 6 days. The system is used to light a covered space where the measurement device is put under the tip of the fiber optic with a ratio of high to width 1:1. The dispersion effect of the light is not measured. The study is only to determine the availability of the light in 11 hours from 8.30am to 6.30pm. From the analysis, the system can be used for constant illumination for 8 hours start from 10.30am to 5.30pm if the sky is clear. And the condition of the weather changes may affect the value of luminance from the fiber optic. Parameter affecting the performance was discussed, and suggestion to improve the system to increase the efficiency of the system is stated. It is believed that this system can be one of a way to reduce electric consumption for building application.