Design of Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) engine nacelle / Asrul Azuwar Hashim
An engine nacelle is used to enclose the engine in a streamlined housing to improve the aerodynamics of the aircraft, to support and protect the engine and its component. For the preliminary of design the engine nacelle, an attempt to install the engine nacelle on the upper surface of the aircraft h...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2006
|
| 主題: | |
| 在線閱讀: | https://ir.uitm.edu.my/id/eprint/37212/1/37212.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | An engine nacelle is used to enclose the engine in a streamlined housing to improve the aerodynamics of the aircraft, to support and protect the engine and its component. For the preliminary of design the engine nacelle, an attempt to install the engine nacelle on the upper surface of the aircraft has been conducted. But after many problems encountered in designing process of external engine nacelle, it was suggested that the engine nacelle should be installed inside the BWB body. The designing processes were done using CATIA software. The model was analyzed using CFD software to study the impact of air intake and nozzle to the aerodynamic characteristics of the aircraft. The model was meshed using Gambit as a preprocessing tool before being analyzed with Fluent. Comparisons of aerodynamics characteristics which are lift coefficient, drag coefficient and pitching moment coefficient, pressure contours and Mach number contours were made between BWB model with air intake and nozzle with BWB model without intake and nozzle. From the results, it shows an install engine nacelle to BWB body give an affected to the aerodynamic of aircraft especially the increases of drag coefficient, CD. |
|---|