Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff

Corrosion is one of the failures that must be considered in any engineering design. Micro organism is one of the factors that will cause the corrosion failure. One of the micro organisms that usually found is barnacles. The water control gate system owned by the Department of Irrigation and Drainage...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohammad @ Yusoff, Muhammad Aiman
Format:	Thesis
Language:	English
Published:	2010
Subjects:	Mechanics applied to machinery Dynamics Machine design and drawing
Online Access:	https://ir.uitm.edu.my/id/eprint/37226/1/37226.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.37226
record_format	uketd_dc
spelling	my-uitm-ir.372262020-11-20T02:03:06Z Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff 2010 Mohammad @ Yusoff, Muhammad Aiman Mechanics applied to machinery. Dynamics Machine design and drawing Corrosion is one of the failures that must be considered in any engineering design. Micro organism is one of the factors that will cause the corrosion failure. One of the micro organisms that usually found is barnacles. The water control gate system owned by the Department of Irrigation and Drainage was affected by the barnacles when they congregate at the wall of water control gate. Clean and repair the system is very costly. So this project is to modify the existing product or existing design device to clean and barnacles from congregate at the wall of the water gate. Previously, there were two existing design which is designed by the previous mechanical students. This designed consist both mechanical system and electrical system. The sprocket and chain is used to roll up and roll down the layer's shaft while rotate the wire brush and an electric motor is used to operate the device. Beside wire brush, the design also consist a scrapper and a layer to protect the wall of water gate from barnacles. This project is required to design and analyze by using CATIA V5 software and fabrication of the model of 'Barnacle Remover Machine' is required to show how the system works. The analysis result from the CATIA V5 will be compared with the manual calculation. 2010 Thesis https://ir.uitm.edu.my/id/eprint/37226/ https://ir.uitm.edu.my/id/eprint/37226/1/37226.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
topic	Mechanics applied to machinery Dynamics Machine design and drawing
spellingShingle	Mechanics applied to machinery Dynamics Machine design and drawing Mohammad @ Yusoff, Muhammad Aiman Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
description	Corrosion is one of the failures that must be considered in any engineering design. Micro organism is one of the factors that will cause the corrosion failure. One of the micro organisms that usually found is barnacles. The water control gate system owned by the Department of Irrigation and Drainage was affected by the barnacles when they congregate at the wall of water control gate. Clean and repair the system is very costly. So this project is to modify the existing product or existing design device to clean and barnacles from congregate at the wall of the water gate. Previously, there were two existing design which is designed by the previous mechanical students. This designed consist both mechanical system and electrical system. The sprocket and chain is used to roll up and roll down the layer's shaft while rotate the wire brush and an electric motor is used to operate the device. Beside wire brush, the design also consist a scrapper and a layer to protect the wall of water gate from barnacles. This project is required to design and analyze by using CATIA V5 software and fabrication of the model of 'Barnacle Remover Machine' is required to show how the system works. The analysis result from the CATIA V5 will be compared with the manual calculation.
format	Thesis
qualification_level	Bachelor degree
author	Mohammad @ Yusoff, Muhammad Aiman
author_facet	Mohammad @ Yusoff, Muhammad Aiman
author_sort	Mohammad @ Yusoff, Muhammad Aiman
title	Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
title_short	Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
title_full	Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
title_fullStr	Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
title_full_unstemmed	Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff
title_sort	design and fabricate of barnacle remover machine with wire brush and scrapper / muhammad aiman mohammad @ yusoff
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Mechanical Engineering
publishDate	2010
url	https://ir.uitm.edu.my/id/eprint/37226/1/37226.pdf
_version_	1783734405852823552

Design and fabricate of barnacle remover machine with wire brush and scrapper / Muhammad Aiman Mohammad @ Yusoff

Similar Items