Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid

Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hou...

Full description

Saved in:

Bibliographic Details
Main Author:	Wahid, Mohamad Nabil
Format:	Thesis
Language:	English
Published:	2010
Subjects:	Machine shops and machine shop practice Machine construction (General)
Online Access:	https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.37337
record_format	uketd_dc
spelling	my-uitm-ir.373372020-11-23T04:33:11Z Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid 2010 Wahid, Mohamad Nabil Machine shops and machine shop practice Machine construction (General) Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hour operation, and/or repeatability of measurements are possible. In this project, the purpose is to measure and obtain the measured dimension of a camshaft of an automotive car. All the programming will be created and developed by using WiT Image Processing Software with an assist of C++ code. A trial and error approach will be used until the suitable programme that created is satisfied all the requirement in term of accuracy, consistency and adaptability of it's to analyze and interpret the image to obtain the required dimension parameter. It is vital in this project to have a perfect image acquisition of the camshaft so that the image produces in the computer is clear and sharp enough to define its edges and thus to generated the required dimension using the developed program. To obtain the required image, a good lightning must first be set-up before any image acquisition can be done, All the dimensions obtain will be compared with the contact approach method as which has the best method in determine the geometrical tolerances of the camshaft. 2010 Thesis https://ir.uitm.edu.my/id/eprint/37337/ https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Ayub, Muhammad Azmi (Assoc. Prof. Dr. Ir.)
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Ayub, Muhammad Azmi (Assoc. Prof. Dr. Ir.)
topic	Machine shops and machine shop practice Machine construction (General)
spellingShingle	Machine shops and machine shop practice Machine construction (General) Wahid, Mohamad Nabil Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
description	Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hour operation, and/or repeatability of measurements are possible. In this project, the purpose is to measure and obtain the measured dimension of a camshaft of an automotive car. All the programming will be created and developed by using WiT Image Processing Software with an assist of C++ code. A trial and error approach will be used until the suitable programme that created is satisfied all the requirement in term of accuracy, consistency and adaptability of it's to analyze and interpret the image to obtain the required dimension parameter. It is vital in this project to have a perfect image acquisition of the camshaft so that the image produces in the computer is clear and sharp enough to define its edges and thus to generated the required dimension using the developed program. To obtain the required image, a good lightning must first be set-up before any image acquisition can be done, All the dimensions obtain will be compared with the contact approach method as which has the best method in determine the geometrical tolerances of the camshaft.
format	Thesis
qualification_level	Bachelor degree
author	Wahid, Mohamad Nabil
author_facet	Wahid, Mohamad Nabil
author_sort	Wahid, Mohamad Nabil
title	Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
title_short	Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
title_full	Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
title_fullStr	Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
title_full_unstemmed	Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
title_sort	measurement of geometrical tolerances using machine vision / mohamad nabil wahid
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Mechanical Engineering
publishDate	2010
url	https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf
_version_	1783734418854117376

Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid

Similar Items