Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid
Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hou...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2010
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| id |
my-uitm-ir.37337 |
|---|---|
| record_format |
uketd_dc |
| spelling |
my-uitm-ir.373372020-11-23T04:33:11Z Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid 2010 Wahid, Mohamad Nabil Machine shops and machine shop practice Machine construction (General) Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hour operation, and/or repeatability of measurements are possible. In this project, the purpose is to measure and obtain the measured dimension of a camshaft of an automotive car. All the programming will be created and developed by using WiT Image Processing Software with an assist of C++ code. A trial and error approach will be used until the suitable programme that created is satisfied all the requirement in term of accuracy, consistency and adaptability of it's to analyze and interpret the image to obtain the required dimension parameter. It is vital in this project to have a perfect image acquisition of the camshaft so that the image produces in the computer is clear and sharp enough to define its edges and thus to generated the required dimension using the developed program. To obtain the required image, a good lightning must first be set-up before any image acquisition can be done, All the dimensions obtain will be compared with the contact approach method as which has the best method in determine the geometrical tolerances of the camshaft. 2010 Thesis https://ir.uitm.edu.my/id/eprint/37337/ https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Ayub, Muhammad Azmi (Assoc. Prof. Dr. Ir.) |
| institution |
Universiti Teknologi MARA |
| collection |
UiTM Institutional Repository |
| language |
English |
| advisor |
Ayub, Muhammad Azmi (Assoc. Prof. Dr. Ir.) |
| topic |
Machine shops and machine shop practice Machine construction (General) |
| spellingShingle |
Machine shops and machine shop practice Machine construction (General) Wahid, Mohamad Nabil Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| description |
Machine Vision is a one of geometrical measurements that uses a digital imaging technology. It employs image processing software to measure and thus to obtain the measured dimension of the product. With the use of Machine Vision, visual inspections that require high-speed, high-magnification, 24-hour operation, and/or repeatability of measurements are possible. In this project, the purpose is to measure and obtain the measured dimension of a camshaft of an automotive car. All the programming will be created and developed by using WiT Image Processing Software with an assist of C++ code. A trial and error approach will be used until the suitable programme that created is satisfied all the requirement in term of accuracy, consistency and adaptability of it's to analyze and interpret the image to obtain the required dimension parameter. It is vital in this project to have a perfect image acquisition of the camshaft so that the image produces in the computer is clear and sharp enough to define its edges and thus to generated the required dimension using the developed program. To obtain the required image, a good lightning must first be set-up before any image acquisition can be done, All the dimensions obtain will be compared with the contact approach method as which has the best method in determine the geometrical tolerances of the camshaft. |
| format |
Thesis |
| qualification_level |
Bachelor degree |
| author |
Wahid, Mohamad Nabil |
| author_facet |
Wahid, Mohamad Nabil |
| author_sort |
Wahid, Mohamad Nabil |
| title |
Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| title_short |
Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| title_full |
Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| title_fullStr |
Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| title_full_unstemmed |
Measurement of geometrical tolerances using machine vision / Mohamad Nabil Wahid |
| title_sort |
measurement of geometrical tolerances using machine vision / mohamad nabil wahid |
| granting_institution |
Universiti Teknologi MARA |
| granting_department |
Faculty of Mechanical Engineering |
| publishDate |
2010 |
| url |
https://ir.uitm.edu.my/id/eprint/37337/1/37337.pdf |
| _version_ |
1783734418854117376 |