Design and development of a turning system for Friction Stir Welding of pipe / Zureshakim Ismail
Friction stir welding (FSW) is one of the latest technologies in the joining of metal, FSW had been popular for welding of plate material particularly aluminum metal. However when come to welding of pipe, the technology is still under research in industrialized countries. One of the essential tools...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2010
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/37351/1/37351.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Friction stir welding (FSW) is one of the latest technologies in the joining of metal, FSW had been popular for welding of plate material particularly aluminum metal. However when come to welding of pipe, the technology is still under research in industrialized countries. One of the essential tools to perform FSW is the requirement of a powerful turning system. It should be able to accommodate a pipe of specific diameter in 1G position, rotated at a specific speed, relevant for FSW applications. Another alternative design is to orbit the stiring tool around the pipe in 5G position. The turning system for frigtion stir welding of pipe comprised of a base frame, a cylindrical clamping mechanism for securing a cylindrical work piece, a worm gear, and a dc motor with variables speed. The basic mechanism for this turning system is the dc motor, which drives the worm screw and rotate the worm gear and the worm gear will drive the pipe that will be welded. This turning system controlled by the speed controller system. The actual welding speed has to select by trial welding. The motor must deliver adequate torque at any selected speed. The current design demonstrated the successful operation of FSW, delivering the required travel speed. The motor power however has to be increased. |
|---|