To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos

The project attempted to investigate the effect of varying the welding parameters that required welding Stainless Steel by friction welding technique. The parameters involved in this study were heating pressure, heating time, forging pressure and forging time. The scope of the project was to obtain...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohd Yunos, Mohd Azne
Format:	Thesis
Language:	English
Published:	2010
Subjects:	Welding
Online Access:	https://ir.uitm.edu.my/id/eprint/37934/1/37934.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.37934
record_format	uketd_dc
spelling	my-uitm-ir.379342020-11-27T09:12:26Z To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos 2010 Mohd Yunos, Mohd Azne Welding The project attempted to investigate the effect of varying the welding parameters that required welding Stainless Steel by friction welding technique. The parameters involved in this study were heating pressure, heating time, forging pressure and forging time. The scope of the project was to obtain the optimum parameters for welding of Stainless Steel (SS 304) specific on 6mm diameter using friction welding technique. The values were obtained by combining the analysis made on the mechanical properties using Tensile Test and by Visual Inspection. Initially, five (5) welding samples at different heating pressure are conducted at constant heating time, forging pressure and forging time, The tensile strength of each sample is recorded and a graph of strength against heating pressure plotted. The optimum value for the heating pressure was obtained by combining with that of Visual finding. Similar experiments were carried out for the heating time, forging pressure and forging time. The optimum parameters were selected should be balance-up with the visual inspection of weld quality and it's not necessarily due to the higher value of tensile stress. Otherwise, it also depends on the shape of the flash either good shape or over forming of flash. From the findings, it can be concluded that the optimum parameters for welding of stainless steel specific on 6mm diameter using friction welding technique are following; Heating Pressure (20 bar), Heating Time (4 second), Forging Pressure (40 bar) and Forging Time (6 second). (lbar=1.0197kgtfcm2) 2010 Thesis https://ir.uitm.edu.my/id/eprint/37934/ https://ir.uitm.edu.my/id/eprint/37934/1/37934.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Kiyai Abas, Sunhaji (Assoc. Prof.)
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Kiyai Abas, Sunhaji (Assoc. Prof.)
topic	Welding
spellingShingle	Welding Mohd Yunos, Mohd Azne To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
description	The project attempted to investigate the effect of varying the welding parameters that required welding Stainless Steel by friction welding technique. The parameters involved in this study were heating pressure, heating time, forging pressure and forging time. The scope of the project was to obtain the optimum parameters for welding of Stainless Steel (SS 304) specific on 6mm diameter using friction welding technique. The values were obtained by combining the analysis made on the mechanical properties using Tensile Test and by Visual Inspection. Initially, five (5) welding samples at different heating pressure are conducted at constant heating time, forging pressure and forging time, The tensile strength of each sample is recorded and a graph of strength against heating pressure plotted. The optimum value for the heating pressure was obtained by combining with that of Visual finding. Similar experiments were carried out for the heating time, forging pressure and forging time. The optimum parameters were selected should be balance-up with the visual inspection of weld quality and it's not necessarily due to the higher value of tensile stress. Otherwise, it also depends on the shape of the flash either good shape or over forming of flash. From the findings, it can be concluded that the optimum parameters for welding of stainless steel specific on 6mm diameter using friction welding technique are following; Heating Pressure (20 bar), Heating Time (4 second), Forging Pressure (40 bar) and Forging Time (6 second). (lbar=1.0197kgtfcm2)
format	Thesis
qualification_level	Bachelor degree
author	Mohd Yunos, Mohd Azne
author_facet	Mohd Yunos, Mohd Azne
author_sort	Mohd Yunos, Mohd Azne
title	To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
title_short	To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
title_full	To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
title_fullStr	To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
title_full_unstemmed	To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
title_sort	to obtain the optimum parameters for welding of stainless steel using friction welding technique / mohd azne mohd yunos
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Mechanical Engineering
publishDate	2010
url	https://ir.uitm.edu.my/id/eprint/37934/1/37934.pdf
_version_	1783734442817224704

To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos

Similar Items