Comparison in approximating maximum speed on road between Cubic Bezier Curve And Cubic Trigonometric Bezier Curve with a shape parameter / Norsyafika Yunaidi & Nor Syalsabila Ghazali
This project describes an alternative way in estimating design speed or the maximum speed allowed for a vehicle to drive safely on a road using curvature information from Bezier curve and Cubic Trigonometric Bezier curve fitting on a map. The road in Tanah Rata Cameron Highland, Malaysia was chosen....
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2019
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/39676/1/39676.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project describes an alternative way in estimating design speed or the maximum speed allowed for a vehicle to drive safely on a road using curvature information from Bezier curve and Cubic Trigonometric Bezier curve fitting on a map. The road in Tanah Rata Cameron Highland, Malaysia was chosen. The values of the curvature were computed by analytical differentiation of the Bezier Curve and Cubic Trigonometric Bezier Curve continuity between joined curves in the process of mapping the road. When the value of curvature is high, the value of radius becomes smaller thus the vehicle needs to bend sharply. The result was verified with the manual calculation of the curvature from the map. The objective of this research is to conclude the curvature information and determine which the best method between Cubic Bezier curve and Cubic Trigonometric Bezier curves with the goal of approximating the maximum speed of road. The comparison between two methods show that both methods produced the best maximum speed for the real road. However, after doing the readjustment, Cubic Trigonometric Bezier is the best method and able to produce best speed of road. |
|---|