The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad

Granular soils can be found in natural slope, foundation base and embankments. It is subjected to static and dynamics loads and the loads can cause particle breakage. Particle breakage is a phenomenon where the soil particles transform to finer state due to slippage, dilation and creep. Particle...

Full description

Saved in:

Bibliographic Details
Main Author:	Ahmad, Juhaizad
Format:	Thesis
Language:	English
Published:	2007
Subjects:	TA Engineering Civil engineering Materials of engineering and construction Particles
Online Access:	https://ir.uitm.edu.my/id/eprint/551/1/TM_JUHAIZAD%20AHMAD%20EC%2007_5%201.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.551
record_format	uketd_dc
spelling	my-uitm-ir.5512016-07-01T03:07:37Z The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad 2007 Ahmad, Juhaizad TA Engineering. Civil engineering Materials of engineering and construction Particles Granular soils can be found in natural slope, foundation base and embankments. It is subjected to static and dynamics loads and the loads can cause particle breakage. Particle breakage is a phenomenon where the soil particles transform to finer state due to slippage, dilation and creep. Particle breakage can affect the stress-strain curve and this is the main focus in this study. The behaviour of stress-strain curve is no more typical if particle breakage commence. The results of consolidation isotropically drained triaxial test of coarse grain sands are presented in this study. The aim of this research is to study on how particle breakage affects the stress-strain curve. The specimens are made of quartz sand with grain size 0.6mm, 1.18mm and 2mm. There are 15 specimens presented with confining pressures 50kPa, lOOkPa, 200kPa, 300kPa and 400kPa are applied for each grain size. The breakage is detected using microphone and the sound recorded is analysed via Sony Sound Forge software. Moreover, dry sieve analysis is conducted before and after the test in order to justify whether breakage occur during shearing stage. From the results obtained, it can be seen that particle breakage has shifted the axial strain at failure. The peak strength at failure always coincide at the same axial strain but particle breakage cause the peak strength to shift to the right with increasing confining pressure. The effect on the Mohr circle shows that particle breakage causes the failure envelope to be curved at high pressure. Normally the test with no particle breakage results a straight failure envelope. The effect of particle breakage to strength is it will increase the deviator stress until a certain point which is abnormally higher than usual. Furthermore, the dense sand will exhibit behaviour like loose sand as the peak strength doesn't appear in stress-strain curve. It is because the effect of dilation is diminished while excessive breakage occurs. 2007 Thesis https://ir.uitm.edu.my/id/eprint/551/ https://ir.uitm.edu.my/id/eprint/551/1/TM_JUHAIZAD%20AHMAD%20EC%2007_5%201.pdf text en public masters Universiti Teknologi MARA Faculty of Civil Engineering
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
topic	TA Engineering Civil engineering Materials of engineering and construction Particles
spellingShingle	TA Engineering Civil engineering Materials of engineering and construction Particles Ahmad, Juhaizad The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
description	Granular soils can be found in natural slope, foundation base and embankments. It is subjected to static and dynamics loads and the loads can cause particle breakage. Particle breakage is a phenomenon where the soil particles transform to finer state due to slippage, dilation and creep. Particle breakage can affect the stress-strain curve and this is the main focus in this study. The behaviour of stress-strain curve is no more typical if particle breakage commence. The results of consolidation isotropically drained triaxial test of coarse grain sands are presented in this study. The aim of this research is to study on how particle breakage affects the stress-strain curve. The specimens are made of quartz sand with grain size 0.6mm, 1.18mm and 2mm. There are 15 specimens presented with confining pressures 50kPa, lOOkPa, 200kPa, 300kPa and 400kPa are applied for each grain size. The breakage is detected using microphone and the sound recorded is analysed via Sony Sound Forge software. Moreover, dry sieve analysis is conducted before and after the test in order to justify whether breakage occur during shearing stage. From the results obtained, it can be seen that particle breakage has shifted the axial strain at failure. The peak strength at failure always coincide at the same axial strain but particle breakage cause the peak strength to shift to the right with increasing confining pressure. The effect on the Mohr circle shows that particle breakage causes the failure envelope to be curved at high pressure. Normally the test with no particle breakage results a straight failure envelope. The effect of particle breakage to strength is it will increase the deviator stress until a certain point which is abnormally higher than usual. Furthermore, the dense sand will exhibit behaviour like loose sand as the peak strength doesn't appear in stress-strain curve. It is because the effect of dilation is diminished while excessive breakage occurs.
format	Thesis
qualification_level	Master's degree
author	Ahmad, Juhaizad
author_facet	Ahmad, Juhaizad
author_sort	Ahmad, Juhaizad
title	The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
title_short	The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
title_full	The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
title_fullStr	The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
title_full_unstemmed	The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad
title_sort	effect of particle breakage on the stress-strain curve / juhaizad ahmad
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Civil Engineering
publishDate	2007
url	https://ir.uitm.edu.my/id/eprint/551/1/TM_JUHAIZAD%20AHMAD%20EC%2007_5%201.pdf
_version_	1783732939235786752

The effect of particle breakage on the stress-strain curve / Juhaizad Ahmad

Similar Items