Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin

A Mobile Offshore Production Unit (MOPU) is any type of portable structure that can be reused when procuring oil and gas from the seabed. There are a few reasons why MOPU was chosen over the conventional fixed offshore platforms, mainly due to its ability to be installed and relocated in a short...

Full description

Saved in:

Bibliographic Details
Main Author:	Jamaluddin, Emi Hafizzul
Format:	Thesis
Language:	English
Published:	2021
Subjects:	Nonmetallic minerals
Online Access:	https://ir.uitm.edu.my/id/eprint/60257/1/60257.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.60257
record_format	uketd_dc
spelling	my-uitm-ir.602572022-05-24T08:31:57Z Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin 2021-10 Jamaluddin, Emi Hafizzul Nonmetallic minerals A Mobile Offshore Production Unit (MOPU) is any type of portable structure that can be reused when procuring oil and gas from the seabed. There are a few reasons why MOPU was chosen over the conventional fixed offshore platforms, mainly due to its ability to be installed and relocated in a short period, low installation and abandonment cost, and providing adequate time for properly evaluating the new reservoirs. In certain circumstances, MOPU may be required to remain at the same location for a longer period beyond its designed life. This study explains the method of life extension assessment to extend the useful life of the MOPU. A three-legged jack-up rig MOPU in cruciform shape was designed, constructed, and commissioned based on the American Bureau of Shipping (ABS) Classification requirement with a design life of 5 years. The MOPU was constructed with three tabular legs with hull hanged at the tabular using jacking-pin at the equal elevation. The MOPU was put in laid-up mode, nonoperational, and clear of hydrocarbons after 10 years in operation. The MOPU is intended to remain at the site for another 5 years or beyond before any plan is developed. The legs are the main focus of the condition assessment for the life extension of the MOPU. The method of condition assessment used is Non-destructive Tests (NDT). No severe defects or cracks were recorded at the stress concentration points. All NDT measurements were found within the acceptable ranges, which qualifies the Fatigue Design Factor (FDF) to be reduced from 5 to 3 at the critical inspectable location and 10 to 5 at the critical non-inspectable location for the new Fatigue Design Life calculation. The maximum stress calculated is 343 MPa located at leg 2 at the jacking pinhole. The result of the life extension assessment shows some locations have exceeded the Design Fatigue Life (DFL), where the lowest fatigue life calculated is 10.3 years. A crack simulation was developed to assess the crack propagation at the lowest fatigue life location where 0.4 years of crack propagation time was calculated before the crack propagate to the next phase. Based on the crack propagation time, the Risk-Based Management (RBM) method was deployed to develop an inspection interval aimed to provide an early deterioration detection at the most susceptible location to ascertain the Fitness For Purpose (FFP) of the MOPU for a life extension. 2021-10 Thesis https://ir.uitm.edu.my/id/eprint/60257/ https://ir.uitm.edu.my/id/eprint/60257/1/60257.pdf text en public masters Universiti Teknologi MARA College of Engineering Abd Razak, Azli (Ir. Ts. Dr.)
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Abd Razak, Azli (Ir. Ts. Dr.)
topic	Nonmetallic minerals
spellingShingle	Nonmetallic minerals Jamaluddin, Emi Hafizzul Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
description	A Mobile Offshore Production Unit (MOPU) is any type of portable structure that can be reused when procuring oil and gas from the seabed. There are a few reasons why MOPU was chosen over the conventional fixed offshore platforms, mainly due to its ability to be installed and relocated in a short period, low installation and abandonment cost, and providing adequate time for properly evaluating the new reservoirs. In certain circumstances, MOPU may be required to remain at the same location for a longer period beyond its designed life. This study explains the method of life extension assessment to extend the useful life of the MOPU. A three-legged jack-up rig MOPU in cruciform shape was designed, constructed, and commissioned based on the American Bureau of Shipping (ABS) Classification requirement with a design life of 5 years. The MOPU was constructed with three tabular legs with hull hanged at the tabular using jacking-pin at the equal elevation. The MOPU was put in laid-up mode, nonoperational, and clear of hydrocarbons after 10 years in operation. The MOPU is intended to remain at the site for another 5 years or beyond before any plan is developed. The legs are the main focus of the condition assessment for the life extension of the MOPU. The method of condition assessment used is Non-destructive Tests (NDT). No severe defects or cracks were recorded at the stress concentration points. All NDT measurements were found within the acceptable ranges, which qualifies the Fatigue Design Factor (FDF) to be reduced from 5 to 3 at the critical inspectable location and 10 to 5 at the critical non-inspectable location for the new Fatigue Design Life calculation. The maximum stress calculated is 343 MPa located at leg 2 at the jacking pinhole. The result of the life extension assessment shows some locations have exceeded the Design Fatigue Life (DFL), where the lowest fatigue life calculated is 10.3 years. A crack simulation was developed to assess the crack propagation at the lowest fatigue life location where 0.4 years of crack propagation time was calculated before the crack propagate to the next phase. Based on the crack propagation time, the Risk-Based Management (RBM) method was deployed to develop an inspection interval aimed to provide an early deterioration detection at the most susceptible location to ascertain the Fitness For Purpose (FFP) of the MOPU for a life extension.
format	Thesis
qualification_level	Master's degree
author	Jamaluddin, Emi Hafizzul
author_facet	Jamaluddin, Emi Hafizzul
author_sort	Jamaluddin, Emi Hafizzul
title	Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
title_short	Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
title_full	Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
title_fullStr	Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
title_full_unstemmed	Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin
title_sort	life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / emi hafizzul jamaluddin
granting_institution	Universiti Teknologi MARA
granting_department	College of Engineering
publishDate	2021
url	https://ir.uitm.edu.my/id/eprint/60257/1/60257.pdf
_version_	1783735105914667008

Life extension via risk based management for tabular leg structure of mobile offshore production unit using finite element method / Emi Hafizzul Jamaluddin

Similar Items