Structural performance of hybrid mengkulang glulam concrete beam / Shuhada Mohd Yusoff
Engineered wood products, such as glued laminated timber (glulam), are designed to decrease the weaknesses of natural wood, such as knots and non-uniform strength, and so increase stiffness and weight carrying capability. One way for increasing the load carrying capacity and performance of glulam st...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2021
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/60613/1/60613.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Engineered wood products, such as glued laminated timber (glulam), are designed to decrease the weaknesses of natural wood, such as knots and non-uniform strength, and so increase stiffness and weight carrying capability. One way for increasing the load carrying capacity and performance of glulam structures is to use glulam-composite constructions. Several elements must be considered, including the stiffness of the bonding lines and the presence of flaws in the wood. The materials tests were carried out to explore the materials properties of glulam, such as moisture content, shear block, and delamination test, while concrete qualities were tested for slump and compression tests. In this study, the constraints and benefits of combining concrete with glulam have been addressed. Mengkulang beam and hybrid Mengkulang glulam with concrete (HMGC) structural sizes have been designated as RC, MC, HMGC A and HMGC B, respectively. Mengkulang glulam beam’s modulus of rupture (MOR) and modulus of elasticity (MOE) was found to be 66.67 N/mm2 and 14,565.23 N/mm2, respectively. The load-carrying capacity of MG was 119.48 kN for this study is three times higher than the RC beam of 40.48 kN and lower than HMGC A and HMGC B by 53.51% and 46.24%, respectively. Both HMGC A and B did not contributed to the bending strength of the MG beam however contributed to double the displacement prior to fracture. Both HMGCs failed due to MG layers splits in the tension zone on weaker zone (finger-joint area) and concrete cracks in the compression zone. Screws acting as the shear-stud between two hybrid materials failed to keep the two materials intact, resulting in non-composite behaviour. |
|---|