Anisotropic behavior and deformation of composite weathered sandstone and shale under destructive and non-destructive stresses / Hasan Ali Abbas Alhamwi
The heterogeneity of interbedded weathered sandstone-shale sedimentary Kenny Hill formation is the major challenge for geotechnical engineers to evaluate this rock mass behavior, particularly, due to the anisotropy induced by the weathered shale bedding plane orientation and interbedded joint int...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2020
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/61015/1/61015.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The heterogeneity of interbedded weathered sandstone-shale sedimentary Kenny Hill
formation is the major challenge for geotechnical engineers to evaluate this rock mass
behavior, particularly, due to the anisotropy induced by the weathered shale bedding
plane orientation and interbedded joint interface orientation. This study aimed to
evaluate the anisotropic behavior and the micro-deformation of composite model that
contribute to the interaction between two different stiffness rock material under
destructive and non-destructive stresses. The destructive tests are; Point Load Test
(PLT), Block Punch Test (BP), Direct Shear, Uniaxial, and Triaxial Compressive
Strength. Meanwhile, the non-destructive tests are; rebound hammer, resistivity,
Portable Ultrasonic Non-Destructive Indicator Test (PUNDIT), Free-Free Resonant
Column (FFRC), real-time ultrasonic and real-time acoustic emission. The anisotropy
of the weathered shale and composite model were measured with respect to the angles
of bedding plane orientation (0º, 30º, 45º, 60º and; 90º) and the angles of joint
orientation (30º, 45º, 60º and; 90º) respectively. The weathered sandstone VP values are
higher by 37% and 41% than composite and weathered shale respectively, while Vs
values are higher by 74% and 61% than composite and weathered shale respectively.
However, by increasing weathered shale angle of bedding plane orientation from 0º to
90º and composite joint orientation from 30º to 90º, the VP and Vs decrease by 70% and
88% for weathered shale and by 35 % and 65 % for composite model respectively. The
PLT and BI index strength of weathered sandstone is higher by 87% and 77% than the
weathered shale respectively. Meanwhile, the index strength of weathered shale
declined by 86% and 62% by decreasing the angle of bedding from 90º to 0º under PLT
and BI respectively. The compressive strength of weathered sandstone is higher than
composite C90 and weathered shale compressive strength by 75% and 77% under UC
stress, 49% and 78% under 2 MPa confining pressure, and by 38% and 69% under 4
MPa confining pressure respectively. The failure criteria behavior of shale under
compressive strength exhibit a remarkable alteration towards linear under 4 MPa
confining pressure than undulant under UC stress due to the decrease in the maximum
degree of strength anisotropy from 76% under UC stress to 41% under 4 MPa confining
pressure. Meanwhile, the composite model displays a U shape failure criteria under (8
MPa, 12 MPa and; 20 MPa) confining pressure, however, the maximum degree of
anisotropic strength increase from 16% under 8 MPa to 64% under 20 MPa for the
reason of failure mode alteration of composite 60º angle of joint orientation under
higher confining pressure. The failure mode of shale classified to failure along bedding
(A.B) and failure cross bedding (C.B). Whereas, composite tend to fail along joint (A.J),
cross joint (C.J) and cross bedding (C.B) within shale part. Therefore, the shear strength
characteristics of bedding plane, shale rock material, joint interface and; composite rock
material are defined accordingly. Eventually, the crack initiation (CI) stress levels are;
(43%-80%), (53%-78%), and (35%-55%) of the peak stress while the crack damage
(CD) stress levels are; (84%-97%), (78%-95%), and (75%-94%) of the peak stress for
weathered sandstone, weathered shale and; composite respectively. The study
significantly contributes to the influence of anisotropy on the geomechanical
characteristics and deformation behavior of weathered sandstone-shale interbedded
formation under various stress states with respect to joint orientation and the ratio of
shale interlayer. |
|---|