Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat

The lack of waste cooking palm oil management especially from fried chicken is becoming problematic issues where it disposing to soil, kitchen sink, drainage system, river and others, which cause pollutions effect. Nowadays, graphene grows to be new types of materials for manufacturing humidity sens...

Full description

Saved in:

Bibliographic Details
Main Author:	Mamat, Robaiah
Format:	Thesis
Language:	English
Published:	2020
Subjects:	Carbon disulfide Graphene Carbon
Online Access:	https://ir.uitm.edu.my/id/eprint/61116/1/61116.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.61116
record_format	uketd_dc
spelling	my-uitm-ir.611162022-06-08T02:49:57Z Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat 2020-09 Mamat, Robaiah Carbon disulfide. Graphene. Carbon The lack of waste cooking palm oil management especially from fried chicken is becoming problematic issues where it disposing to soil, kitchen sink, drainage system, river and others, which cause pollutions effect. Nowadays, graphene grows to be new types of materials for manufacturing humidity sensors with low cost and eco-friendly technology in industry. Conventionally, graphene was synthesized from fossil fuels with high toxicity such as methane, acetylene and ethanol benzene, xylene, toluene, etc. The costs of these carbon sources are expensive and non-renewable. Therefore, efforts by utilizing carbon source from natural source such as grass, plastics, vegetation waste, sugarcane, tea-tree extract, sesame oil, camphor oil, and palm oil have been studied. In this research, abundant of waste cooking palm oil (WCPO) was used as a natural carbon source for synthesis graphene. It is as alternative to conserve the environment and low-cost method. WCPO was used as a precursor and nickel foil was used as a substrate. Graphene was successfully deposited on nickel substrate by using double thermal chemical vapour deposition, (DTCVD) method. All samples were prepared at different cycle precursor (refined, first cycle, second cycles and third cycles), amount of precursor (5 μl, 10 μl, 50 μl, and 100 μl), temperature precursor (250°C-450°C), deposition temperature (850°C-1100°C), and synthesis time (5-30 minutes), respectively. The results indicate that graphene prepared at third cycles precursor with 10 μl at 350°C of temperature precursor, 1000°C of deposition temperature and 20 minutes deposition time have good arrangements graphene network structure with large active area and introduce less boundary defects. Additionally, the full width half maximum, (FWHM) of the (002) peak become larger (0.32) which indicate decreased size of the crystallite (25.24 nm), and decreases number of graphene layers (9 layers). Moreover, at the optimum parameter the formation of active carbon species (dehydrogenation) and diffusion of active carbon on the surface was energetic and increase the percentage of reflectance (66.37%). The growth of graphene film at an optimum parameter, resulting in the highest of I2D/IG (0.41) and lowest of ID/IG (0.02) since, the carbon atoms segregate and form multi layers graphene with high crystalline and low defective structure. Subsequently, the optimum sample of graphene on nickel substrate was transferred onto glass substrate by Poly (methyl methacrylate), (PMMA) polymer for humidity sensor application. The response-recovery time, sensitivity, and repeatability of humidity sensor were determined using humidity chamber. The adsorption (response time) and desorption (recovery time) process takes several hundred second, 597 and 503 second respectively. These attributed to the sheet resistant is height in multilayer graphene. However, it is found that the sensitivity of multilayer graphene-based humidity sensor using WCPO has potential to develop as sensing material in humidity sensors and comparable with other material that sensitive to water molecules. It shows the sensitivity at 40% to 90% RH, is 365%. In the meantime, humidity sensor using graphene quantum dots, rGO/Ls, graphene/polypyrrole, and SZO/SnO2 sensor, the sensitivity are, 390, 298, 138, and 67.1%, respectively. Multilayer graphene-based humidity sensor using WCPO remains constant and similar at fifth cycles, indicating that sensor exhibits stable and excellent repeatability and have potential as a sensing material based with low cost and renewable energy. 2020-09 Thesis https://ir.uitm.edu.my/id/eprint/61116/ https://ir.uitm.edu.my/id/eprint/61116/1/61116.pdf text en public phd doctoral Universiti Teknologi MARA Faculty of Applied Sciences Abdullah, Saifollah (Prof. Dr.)
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Abdullah, Saifollah (Prof. Dr.)
topic	Carbon disulfide Graphene Carbon
spellingShingle	Carbon disulfide Graphene Carbon Mamat, Robaiah Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
description	The lack of waste cooking palm oil management especially from fried chicken is becoming problematic issues where it disposing to soil, kitchen sink, drainage system, river and others, which cause pollutions effect. Nowadays, graphene grows to be new types of materials for manufacturing humidity sensors with low cost and eco-friendly technology in industry. Conventionally, graphene was synthesized from fossil fuels with high toxicity such as methane, acetylene and ethanol benzene, xylene, toluene, etc. The costs of these carbon sources are expensive and non-renewable. Therefore, efforts by utilizing carbon source from natural source such as grass, plastics, vegetation waste, sugarcane, tea-tree extract, sesame oil, camphor oil, and palm oil have been studied. In this research, abundant of waste cooking palm oil (WCPO) was used as a natural carbon source for synthesis graphene. It is as alternative to conserve the environment and low-cost method. WCPO was used as a precursor and nickel foil was used as a substrate. Graphene was successfully deposited on nickel substrate by using double thermal chemical vapour deposition, (DTCVD) method. All samples were prepared at different cycle precursor (refined, first cycle, second cycles and third cycles), amount of precursor (5 μl, 10 μl, 50 μl, and 100 μl), temperature precursor (250°C-450°C), deposition temperature (850°C-1100°C), and synthesis time (5-30 minutes), respectively. The results indicate that graphene prepared at third cycles precursor with 10 μl at 350°C of temperature precursor, 1000°C of deposition temperature and 20 minutes deposition time have good arrangements graphene network structure with large active area and introduce less boundary defects. Additionally, the full width half maximum, (FWHM) of the (002) peak become larger (0.32) which indicate decreased size of the crystallite (25.24 nm), and decreases number of graphene layers (9 layers). Moreover, at the optimum parameter the formation of active carbon species (dehydrogenation) and diffusion of active carbon on the surface was energetic and increase the percentage of reflectance (66.37%). The growth of graphene film at an optimum parameter, resulting in the highest of I2D/IG (0.41) and lowest of ID/IG (0.02) since, the carbon atoms segregate and form multi layers graphene with high crystalline and low defective structure. Subsequently, the optimum sample of graphene on nickel substrate was transferred onto glass substrate by Poly (methyl methacrylate), (PMMA) polymer for humidity sensor application. The response-recovery time, sensitivity, and repeatability of humidity sensor were determined using humidity chamber. The adsorption (response time) and desorption (recovery time) process takes several hundred second, 597 and 503 second respectively. These attributed to the sheet resistant is height in multilayer graphene. However, it is found that the sensitivity of multilayer graphene-based humidity sensor using WCPO has potential to develop as sensing material in humidity sensors and comparable with other material that sensitive to water molecules. It shows the sensitivity at 40% to 90% RH, is 365%. In the meantime, humidity sensor using graphene quantum dots, rGO/Ls, graphene/polypyrrole, and SZO/SnO2 sensor, the sensitivity are, 390, 298, 138, and 67.1%, respectively. Multilayer graphene-based humidity sensor using WCPO remains constant and similar at fifth cycles, indicating that sensor exhibits stable and excellent repeatability and have potential as a sensing material based with low cost and renewable energy.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Mamat, Robaiah
author_facet	Mamat, Robaiah
author_sort	Mamat, Robaiah
title	Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
title_short	Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
title_full	Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
title_fullStr	Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
title_full_unstemmed	Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat
title_sort	synthesis of graphene using waste cooking palm oil (wcpo) by double thermal chemical vapour deposition (dtcvd) method for humidity sensor application / robaiah mamat
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Applied Sciences
publishDate	2020
url	https://ir.uitm.edu.my/id/eprint/61116/1/61116.pdf
_version_	1783735215824306176

Synthesis of graphene using waste cooking palm oil (WCPO) by double thermal chemical vapour deposition (DTCVD) method for humidity sensor application / Robaiah Mamat

Similar Items