Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam

Wing box test rig is designed to hold the wing box in place and keep them cantilevered so that the lift on the wing does not bend the rig during the experimental session. In order to conduct a test that involve high load, the wing box test rig structure was constructed. However, the current structur...

Full description

Saved in:

Bibliographic Details
Main Author:	Tengku Hitam, Tengku Kamil Ariff
Format:	Thesis
Language:	English
Published:	2010
Subjects:	Technical hydraulics
Online Access:	https://ir.uitm.edu.my/id/eprint/63559/1/63559.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.63559
record_format	uketd_dc
spelling	my-uitm-ir.635592022-07-07T07:11:57Z Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam 2010-05 Tengku Hitam, Tengku Kamil Ariff Technical hydraulics Wing box test rig is designed to hold the wing box in place and keep them cantilevered so that the lift on the wing does not bend the rig during the experimental session. In order to conduct a test that involve high load, the wing box test rig structure was constructed. However, the current structure Cannot apply load to a wing box. In this project, the wing box load applicator was developed by using hydraulic actuator. Actuator can be defined as energy converters which transform energy from an external source into mechanical energy in a controllable way. The output quantities are the force, the work and the stroke (50cm). The scopes of this project is design and analyze the platform that can withstand at least IkN of load with factor of safety of 3 and to analyze the system from the aspect of the structural requirement and load requirement of test to be conducted. This platform was joined together with current structure that has been utilized in the UiTM Aerospace Laboratory and the students will be able to conduct experiment or wing box static test by using this new structure. For the design analysis, it consists of the comparison of four cases. The raw material that was selected to fabricate the platform is square hollow beam.mild steel (A36). The theoretical analysis in this design analysis is moment inertia and maximum deflection of each case. All of these results are compared and the case which gives the less deflection or gives a minimum value of deflection was selected for fabrication process. 2010-05 Thesis https://ir.uitm.edu.my/id/eprint/63559/ https://ir.uitm.edu.my/id/eprint/63559/1/63559.pdf text en public degree Universiti Teknologi MARA Faculty of Mechanical Engineering Ramly, Ramzyzan
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Ramly, Ramzyzan
topic	Technical hydraulics
spellingShingle	Technical hydraulics Tengku Hitam, Tengku Kamil Ariff Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
description	Wing box test rig is designed to hold the wing box in place and keep them cantilevered so that the lift on the wing does not bend the rig during the experimental session. In order to conduct a test that involve high load, the wing box test rig structure was constructed. However, the current structure Cannot apply load to a wing box. In this project, the wing box load applicator was developed by using hydraulic actuator. Actuator can be defined as energy converters which transform energy from an external source into mechanical energy in a controllable way. The output quantities are the force, the work and the stroke (50cm). The scopes of this project is design and analyze the platform that can withstand at least IkN of load with factor of safety of 3 and to analyze the system from the aspect of the structural requirement and load requirement of test to be conducted. This platform was joined together with current structure that has been utilized in the UiTM Aerospace Laboratory and the students will be able to conduct experiment or wing box static test by using this new structure. For the design analysis, it consists of the comparison of four cases. The raw material that was selected to fabricate the platform is square hollow beam.mild steel (A36). The theoretical analysis in this design analysis is moment inertia and maximum deflection of each case. All of these results are compared and the case which gives the less deflection or gives a minimum value of deflection was selected for fabrication process.
format	Thesis
qualification_level	Bachelor degree
author	Tengku Hitam, Tengku Kamil Ariff
author_facet	Tengku Hitam, Tengku Kamil Ariff
author_sort	Tengku Hitam, Tengku Kamil Ariff
title	Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
title_short	Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
title_full	Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
title_fullStr	Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
title_full_unstemmed	Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam
title_sort	development of an actuator system for applying load for wing box static test / tengku kamil ariff tengku hitam
granting_institution	Universiti Teknologi MARA
granting_department	Faculty of Mechanical Engineering
publishDate	2010
url	https://ir.uitm.edu.my/id/eprint/63559/1/63559.pdf
_version_	1783735337759014912

Development of an actuator system for applying load for wing box static test / Tengku Kamil Ariff Tengku Hitam

Similar Items