Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad

Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad

This report presents the analysis of various types of welding imperfections that were collected from a local fabrication contractor. These imperfections may occur unintentionally and repeatedly because the causes were not understood or the existing remedies were not effective in preventing them. The...

Saved in:

书目详细资料
主要作者:	Wan Ahmad, Wan Muhd Adham
格式:	Thesis
语言:	English
出版:	2010
主题:	Welding
在线阅读:	https://ir.uitm.edu.my/id/eprint/64045/1/64045.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin
由: Samsudin, Muhamad 'Afif
出版: (2009)

Evaluation and analysis of various pipe welding imperfections collected from the gas piping fabricators / Lokman Ismail
由: Ismail, Lokman
出版: (2009)

To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin
由: Benjamin, Rayner
出版: (2010)

To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
由: Mohd Yunos, Mohd Azne
出版: (2010)

Perkembangan arca logam di Malaysia aplikasi teknik kimpalan / Wan Din Wan Muhammad
由: Wan Muhammad, Wan Din
出版: (2001)

Design and fabrication of mechanized welding traction system / Muhamad Hairi Hamid
由: Hamid, Muhamad Hairi
出版: (2010)

Work study on industrial production in x-member assembly SRM 24 (welding) at Tracoma Sdn. Bhd. / Wan Mohammad Fadhli Wan Hapandi
由: Wan Hapandi, Wan Mohammad Fadhli
出版: (2009)

Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
由: Muhammad, Norasiah
出版: (2015)

Study on properties of dissimilar metal welding between stainless steel (AISI 304L) and mild steel (AISI 1018). / Mohd Soleham Juraimi Kamarudin
由: Kamarudin, Mohd Soleham Juraimi
出版: (2009)

Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub
由: Yaakub, Mohamad Yazman
出版: (2014)

The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri
由: Zahuri, Zairee Ezzam
出版: (2010)

Study of the weld pool shape variations with the welding parameters for optimization under tig welding process
由: Liha, Lateng

A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor
由: Ahmad Manshor, Zulkifli
出版: (2006)

Microstructural features and properties of TIG melted AISI 430 ferritic stainless steel welds /
由: Amuda, Muhammed Olawale Hakeem
出版: (2011)

Effect of vibration frequencies on the welding properties of rectangular mild steel plate
由: Hussein, Alaa Raad
出版: (2010)

Investigation on the mechanical properties and microstructure analysis of micro-resistance spot welding between stainless steel 316L and Tl-6AL-4V /
由: Muhammad Safwan Mohd. Mansor
出版: (2020)

The employment of advanced fiber laser technology to weld dissimilar materials : stainless steel and aluminum alloy using pre-placed powder-based activating flux and filler /
由: Ezazi, Mohammadamin
出版: (2015)

Mechanical characterization of AA6061-T6 aluminum alloy friction stir and tungsten arc welded with and without post-weld heat treatment
由: Fadaeifard, Firouz
出版: (2016)

To obtain the optimum parameters for welding of aluminium using friction welding technique / Mohsin Marhaban
由: Marhaban, Mohsin
出版: (2010)

Friction stir welding of aluminum alloy to polycarbonate sheet /
由: Mohd Rahmat Firman Sahifulddin
出版: (2014)

Friction stir welding of aluminium alloy (AA 5052): experimental and simulation /
由: Moshwan, Raza
出版: (2014)

Development of drive system for orbital pipe welding and cutting / Mohamad Bazli Kasim
由: Kasim, Mohamad Bazli
出版: (2010)

Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi
由: Mohd Zuhudi, Akramin
出版: (2005)

Technical evaluation of shield metal arc welding process before and after post weld heat treatment /
由: Mohd Ansari Amir Hamzah

The performance of small wire submerged arc welding on carbon steel / Shahfuan Hanif Ahmad Hamidi
由: Ahmad Hamidi, Shahfuan Hanif
出版: (2014)

Integration of travel control system with traverse test rig for friction stir welding process / Nur'Amirah Busu
由: Busu, Nur'Amirah
出版: (2017)

Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
由: Mohammed Redza, Mohd Ridhwan
出版: (2016)

Quality edge build-up by automatic pulsed micro-plasma arc welding /
由: Bai Yu
出版: (1998)

Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin
由: Mohd Zin, Mohd Syazwan
出版: (2018)

Development of optimum range of joint design for carbon steel by small wire submerged arc welding process / Saiful Yazan Jamaludin
由: Jamaludin, Saiful Yazan
出版: (2009)

Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah
由: Armansyah, Armansyah
出版: (2020)

A study on corrosion analysis of powder addition in al-sus 304 friction stir welding /
由: Muhaini Manshor
出版: (2015)

Thermal stress analysis of butt welded joint /
由: Karthikeyan Balasubramaniam
出版: (2013)

Optimization of mig welding process parameters on mechanical properties of Al-MS-SS materials
由: Nik Nur Fatihah, Che Hassan

Effects of new and recycle flux on the mechanical properties of submerged arc welded (SAW) line pipe grade X52M and X65M /
由: Meor Mohd Adli Taib
出版: (2020)

Spot welding quality check using artificial intelligence /
由: Jagadisa Rajarathnam
出版: (2018)

Process parameter optimization of welding turbine stage 4 blades using Taguchi method /
由: Lee, Chan Wai
出版: (2009)

Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed
由: Mohamed, Mohamad Faruqi
出版: (2018)

Microstructural evolution and mechanical properties of magnesium alloy/austenitic stainless steel joints produced by resistance spot welding techniques /
由: Manladan, Sunusi Marwana
出版: (2017)

Study on dissimilar material joining between polymer and metals by using laser welding and friction stir welding /
由: Farazila Yusof
出版: (2011)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group