Design of microstrip patch antenna with stripline feeding technique / Ahmad Shafiq Mohamed Azmi
This thesis investigates the design of a rectangular microstrip patch antenna with strip line feeding technique. The rectangular patch antenna has a dimension of 88mm x70 mm. This strip line feeding technique involves two layers of substrate where4.85mm width and 14mm length are defined as a feed li...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2011
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/67831/1/67831.PDF |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | This thesis investigates the design of a rectangular microstrip patch antenna with strip line feeding technique. The rectangular patch antenna has a dimension of 88mm x70 mm. This strip line feeding technique involves two layers of substrate where4.85mm width and 14mm length are defined as a feed line. The antenna is fabricated using RT/Duroid 5880 with e{ = 2.2 and h = 1.575mm. This substrate material is chosen due to its reliability in fabricating high frequency microwave devices. The selected operating frequency is 2 GHz suitable for many 3G applications. All the design dimensions are constructed and simulated using CST Software. The simulation process repeated several times until the best desired performance acquired. Introduction of aluminium plate and vi as are necessary for this doubled layers antenna assembly. Measurements are done using Vector Network Analyzer (VNA). The parameters such as return loss, voltage standing wave ratio (VSWR) and input impedance obtained from simulations and experiments are compared and discussed. Both results showed good performances for this antenna design. |
|---|