Designing low pass filter for RF application / Mohammad Fairuz Ismail
This project focused on designing and building a low pass microstrip filter with a passband up to 3 GHz. The filter is intended to operate with other specifications: Equalripple Chebychev filter, passband ripple less than 0.5 dB and stopband attenuation at 6 GHz is more than 40 dB. This project was...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2006
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/68249/1/68249.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | This project focused on designing and building a low pass microstrip filter with a passband up to 3 GHz. The filter is intended to operate with other specifications: Equalripple Chebychev filter, passband ripple less than 0.5 dB and stopband attenuation at 6 GHz is more than 40 dB. This project was designed and simulated using CAD packages called Genesys and HP Eesof Libra. The microstrip laminates used was Duroid/Rogers 5872 with 0.5 mm substrate thickness and relative permittivity tjr equal to 2.33. The filter is then measured using a Wiltron Scalar Network Analyzer to obtain its precision. |
|---|