Design of microstrip lowpass filter at 3 GHz for wireless communications / Normasni Ad Fauzi

The purposes of this project are to design, simulate, fabricate and measuring the output response of the Microstrip Lowpass Filter. The filter is intended to operate with cut-off frequency of 3 GHz, a stopband attenuation of 30 dB and 0.5 dB of passband attenuation. The ripple passband is to be 0.04...

全面介绍

Saved in:
书目详细资料
主要作者: Ad Fauzi, Normasni
格式: Thesis
语言:English
出版: 2004
主题:
在线阅读:https://ir.uitm.edu.my/id/eprint/68385/1/68385.pdf
标签: 添加标签
没有标签, 成为第一个标记此记录!
实物特征
总结:The purposes of this project are to design, simulate, fabricate and measuring the output response of the Microstrip Lowpass Filter. The filter is intended to operate with cut-off frequency of 3 GHz, a stopband attenuation of 30 dB and 0.5 dB of passband attenuation. The ripple passband is to be 0.0432 dB. The major design process is aided by CAD packages called HP/Eesof Libra and Sonnet Lite. The microstrip laminates used as 'Duroid/Rogers 5872' with 0.5 mm substrate thickness and relative permittivity ^r equal to 2.33. The filter is then measured using a Wiltron Scalar Network Analyzer to obtain its characteristics.