Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad

Modern day engineering structures depends on actively designing against fatigue failures. While Wire-Arc Additive Manufacturing (WAAM) offers numerous advantages to conventional manufacturing techniques, the fatigue performance of WAAM structures must be understood before they can be safely used. Th...

Full description

Saved in:

Bibliographic Details
Main Author:	Mat @ Muhammad, Muhd Faiz
Format:	Thesis
Language:	English
Published:	2022
Subjects:	Metal manufactures Metalworking
Online Access:	https://ir.uitm.edu.my/id/eprint/72731/2/72731.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.72731
record_format	uketd_dc
spelling	my-uitm-ir.727312023-02-02T05:00:00Z Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad 2022 Mat @ Muhammad, Muhd Faiz Metal manufactures. Metalworking Modern day engineering structures depends on actively designing against fatigue failures. While Wire-Arc Additive Manufacturing (WAAM) offers numerous advantages to conventional manufacturing techniques, the fatigue performance of WAAM structures must be understood before they can be safely used. This thesis aims to investigate the relationship between the grain size microstructure of SS316L austenitic stainless steel and the mechanical properties of the WAAM component. The research is divided into four phases. The initial phase is the material verification and selection of the WAAM SS316L process parameters for thick wall structure using a Robotic welding system. The material chemical composition was verified by using an Arc spectrometer. The result was used for material modelling and computation. Included in this phase is the complex experimental thermal history data acquired by using a high-temperature thermocouple connected to a Data Acquisition System (DAQ) for thermal calibration. The second phase is the development of a Finite Element Method (FEM) WAAM model procedure using general-purpose numerical computational software MSC Marc/Mentat with utility routine and subroutine capability. Further, the temperature-dependent material parameter was developed in JMatPRO. The numerical computation is based on von Mises yield criterion and isotropic hardening rules. The numerical computational heat distribution in the WAAM model was calibrated by referring to the thermal experiment for verifying the heat transfer coefficients. As modelling a complex multi-pass welding simulation is a challenge due to the longer computational time, an innovative solution to simplify the Heat Source Model (HSM) was explored. As a result, a FEM procedure for WAAM model was developed. The third phase of the research is the analysis of SS316L material grain size microstructure and the grain growth material parameters at elevated temperature. A grain size prediction algorithm was developed specifically for SS316L material based on free grain growth formula. The real material parameters for the grain growth formula was investigated using a Dilatometer at elevated temperature with different holding times. At this stage, specific material parameters for the grain growth prediction subroutine was defined, such as activation energy (Q) and modified kinetic constant (Mo). In addition, an experimental investigation of the microstructure on the initial and final grain size according to ASTM guidelines was conducted. Evolution of grain sizes was observed within the as-printed WAAM structure. In the fourth phase, the mechanical properties of the as-printed WAAM component was defined. Differentiated by the upper and lower section, specimens for tensile, hardness and fatigue test were extracted from the experimental thick wall WAAM specimen. As a result, a novel FEM procedure for WAAM component was developed, calibrated and validated by experiment. Additionally, the grain growth material parameter for SS316L was defined as a temperature dependant material property and the grain growth behaviour was investigated. According to tensile, hardness and fatigue test standards, the mechanical properties and fatigue life of the WAAM component was defined for each section. A finer grain microstructure has an absolute effect of increasing the fatigue life of the WAAM component. 2022 Thesis https://ir.uitm.edu.my/id/eprint/72731/ https://ir.uitm.edu.my/id/eprint/72731/2/72731.pdf text en public phd doctoral Universiti Teknologi MARA (UiTM) College of Engineering HP Manurung, Ing Yupiter
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	HP Manurung, Ing Yupiter
topic	Metal manufactures Metalworking
spellingShingle	Metal manufactures Metalworking Mat @ Muhammad, Muhd Faiz Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
description	Modern day engineering structures depends on actively designing against fatigue failures. While Wire-Arc Additive Manufacturing (WAAM) offers numerous advantages to conventional manufacturing techniques, the fatigue performance of WAAM structures must be understood before they can be safely used. This thesis aims to investigate the relationship between the grain size microstructure of SS316L austenitic stainless steel and the mechanical properties of the WAAM component. The research is divided into four phases. The initial phase is the material verification and selection of the WAAM SS316L process parameters for thick wall structure using a Robotic welding system. The material chemical composition was verified by using an Arc spectrometer. The result was used for material modelling and computation. Included in this phase is the complex experimental thermal history data acquired by using a high-temperature thermocouple connected to a Data Acquisition System (DAQ) for thermal calibration. The second phase is the development of a Finite Element Method (FEM) WAAM model procedure using general-purpose numerical computational software MSC Marc/Mentat with utility routine and subroutine capability. Further, the temperature-dependent material parameter was developed in JMatPRO. The numerical computation is based on von Mises yield criterion and isotropic hardening rules. The numerical computational heat distribution in the WAAM model was calibrated by referring to the thermal experiment for verifying the heat transfer coefficients. As modelling a complex multi-pass welding simulation is a challenge due to the longer computational time, an innovative solution to simplify the Heat Source Model (HSM) was explored. As a result, a FEM procedure for WAAM model was developed. The third phase of the research is the analysis of SS316L material grain size microstructure and the grain growth material parameters at elevated temperature. A grain size prediction algorithm was developed specifically for SS316L material based on free grain growth formula. The real material parameters for the grain growth formula was investigated using a Dilatometer at elevated temperature with different holding times. At this stage, specific material parameters for the grain growth prediction subroutine was defined, such as activation energy (Q) and modified kinetic constant (Mo). In addition, an experimental investigation of the microstructure on the initial and final grain size according to ASTM guidelines was conducted. Evolution of grain sizes was observed within the as-printed WAAM structure. In the fourth phase, the mechanical properties of the as-printed WAAM component was defined. Differentiated by the upper and lower section, specimens for tensile, hardness and fatigue test were extracted from the experimental thick wall WAAM specimen. As a result, a novel FEM procedure for WAAM component was developed, calibrated and validated by experiment. Additionally, the grain growth material parameter for SS316L was defined as a temperature dependant material property and the grain growth behaviour was investigated. According to tensile, hardness and fatigue test standards, the mechanical properties and fatigue life of the WAAM component was defined for each section. A finer grain microstructure has an absolute effect of increasing the fatigue life of the WAAM component.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Mat @ Muhammad, Muhd Faiz
author_facet	Mat @ Muhammad, Muhd Faiz
author_sort	Mat @ Muhammad, Muhd Faiz
title	Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
title_short	Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
title_full	Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
title_fullStr	Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
title_full_unstemmed	Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad
title_sort	mechanical and grain growth behaviour of wire-arc additive manufacturing (waam) of ss316l using experiment and numerical simulation / muhd faiz mat @ muhammad
granting_institution	Universiti Teknologi MARA (UiTM)
granting_department	College of Engineering
publishDate	2022
url	https://ir.uitm.edu.my/id/eprint/72731/2/72731.pdf
_version_	1783735959447142400

Mechanical and grain growth behaviour of wire-arc additive manufacturing (WAAM) of SS316L using experiment and numerical simulation / Muhd Faiz Mat @ Muhammad

Similar Items