Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri

Implementation of technology based on renewable energy sources is crucial to maintain environmental sustainability. However, the problems with conventional photocatalyst, zinc oxide (ZnO) are fast recombination, large band gap and require high consumption light source. Thus, this study found that zi...

全面介绍

Saved in:
书目详细资料
主要作者: Sinar Mashuri, Salma Izati
格式: Thesis
语言:English
出版: 2022
主题:
在线阅读:https://ir.uitm.edu.my/id/eprint/75902/1/75902.pdf
标签: 添加标签
没有标签, 成为第一个标记此记录!
id my-uitm-ir.75902
record_format uketd_dc
spelling my-uitm-ir.759022023-05-08T08:19:47Z Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri 2022 Sinar Mashuri, Salma Izati Photochemistry Renewable energy sources Implementation of technology based on renewable energy sources is crucial to maintain environmental sustainability. However, the problems with conventional photocatalyst, zinc oxide (ZnO) are fast recombination, large band gap and require high consumption light source. Thus, this study found that zinc oxide loaded cadmium sulphide (ZnO/CdS) composite photocatalyst works in the light-emitting diode (LED) visible light range was synthesized for degradation of methylene blue (MB). The ZnO was prepared using the solid-state method and impregnated with CdS via the wet-impregnation process. The characterization of composite was carried out using N2 sorption analysis using Brunauer-Emmett-Teller (BET) method, Field Emission Scanning Electron Microscope (FESEM), X-Ray Diffraction (XRD) and Ultraviolet-Visible-near-IR spectrophotometer (UV-Vis-NIR). Furthermore, the photocatalytic degradation of MB solution was tested in a photocatalytic reactor equipped with a 21-Watt LED visible lamp as a source of light energy, gas diffuser, and magnetic stirrer. Besides, the effect of operating parameters such as the different molar ratios of ZnO to CdS, initial concentration, pH of the MB solution, and amount of catalyst on the photocatalytic activity was analysed and discussed. The successful of ZnO band gap tailoring from 3.30 eV into 2.46 eV with CdS in the composite photocatalyst. The ZnO/CdS photocatalyst shows high crystallinity with the formation of coral-like morphology by tiny 3D geometric structure. The elemental compound of Zn, O, Cd and S presence were confirmed by EDX analysis. Meanwhile the surface area of ZnO/CdS was found to be 13.664 m2 g-1. It was found that the ZnO/CdS photocatalyst completely degrades the MB solution up to 100% with a 3:1 molar ratio of ZnO:CdS (Z3C1), 300 mL of 100 mg/L MB solution at pH 9, 0.5 g of Z3C1 photocatalyst within 90 minutes reaction time. A scavenger test was carried out to identify the major active species that responsible for the degradation of MB solution. The capturing of the hydroxyl radical OH• and superoxide anion radical •O2- by scavenger reagents reducing the degradation of MB, hence it proved that the Z3C1 photocatalyst initiates the photodegradation of MB instead of the only adsorption. Meanwhile, the reusability of Z3C1 photocatalyst shows the ability of the catalyst to be recycled resulting in 100%, 66.8%, 50.3%, and 46.4% degradation from the first to the fourth cycle, respectively, due to the deactivation of the catalyst caused by leaching of active sites and photo-corrosion. In conclusion, the ZnO/CdS is promising as a highly potential photocatalyst for the degradation of organic pollutants especially MB in LED visible light energy. 2022 Thesis https://ir.uitm.edu.my/id/eprint/75902/ https://ir.uitm.edu.my/id/eprint/75902/1/75902.pdf text en public masters Universiti Teknologi MARA (UiTM) Faculty of Applied Science Ibrahim, Mohd Lokman
institution Universiti Teknologi MARA
collection UiTM Institutional Repository
language English
advisor Ibrahim, Mohd Lokman
topic Photochemistry
Renewable energy sources
spellingShingle Photochemistry
Renewable energy sources
Sinar Mashuri, Salma Izati
Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
description Implementation of technology based on renewable energy sources is crucial to maintain environmental sustainability. However, the problems with conventional photocatalyst, zinc oxide (ZnO) are fast recombination, large band gap and require high consumption light source. Thus, this study found that zinc oxide loaded cadmium sulphide (ZnO/CdS) composite photocatalyst works in the light-emitting diode (LED) visible light range was synthesized for degradation of methylene blue (MB). The ZnO was prepared using the solid-state method and impregnated with CdS via the wet-impregnation process. The characterization of composite was carried out using N2 sorption analysis using Brunauer-Emmett-Teller (BET) method, Field Emission Scanning Electron Microscope (FESEM), X-Ray Diffraction (XRD) and Ultraviolet-Visible-near-IR spectrophotometer (UV-Vis-NIR). Furthermore, the photocatalytic degradation of MB solution was tested in a photocatalytic reactor equipped with a 21-Watt LED visible lamp as a source of light energy, gas diffuser, and magnetic stirrer. Besides, the effect of operating parameters such as the different molar ratios of ZnO to CdS, initial concentration, pH of the MB solution, and amount of catalyst on the photocatalytic activity was analysed and discussed. The successful of ZnO band gap tailoring from 3.30 eV into 2.46 eV with CdS in the composite photocatalyst. The ZnO/CdS photocatalyst shows high crystallinity with the formation of coral-like morphology by tiny 3D geometric structure. The elemental compound of Zn, O, Cd and S presence were confirmed by EDX analysis. Meanwhile the surface area of ZnO/CdS was found to be 13.664 m2 g-1. It was found that the ZnO/CdS photocatalyst completely degrades the MB solution up to 100% with a 3:1 molar ratio of ZnO:CdS (Z3C1), 300 mL of 100 mg/L MB solution at pH 9, 0.5 g of Z3C1 photocatalyst within 90 minutes reaction time. A scavenger test was carried out to identify the major active species that responsible for the degradation of MB solution. The capturing of the hydroxyl radical OH• and superoxide anion radical •O2- by scavenger reagents reducing the degradation of MB, hence it proved that the Z3C1 photocatalyst initiates the photodegradation of MB instead of the only adsorption. Meanwhile, the reusability of Z3C1 photocatalyst shows the ability of the catalyst to be recycled resulting in 100%, 66.8%, 50.3%, and 46.4% degradation from the first to the fourth cycle, respectively, due to the deactivation of the catalyst caused by leaching of active sites and photo-corrosion. In conclusion, the ZnO/CdS is promising as a highly potential photocatalyst for the degradation of organic pollutants especially MB in LED visible light energy.
format Thesis
qualification_level Master's degree
author Sinar Mashuri, Salma Izati
author_facet Sinar Mashuri, Salma Izati
author_sort Sinar Mashuri, Salma Izati
title Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
title_short Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
title_full Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
title_fullStr Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
title_full_unstemmed Synthesis and characterization of ZnO/CdS photocatalyst for methylene blue degradation under LED light / Salma Izati Sinar Mashuri
title_sort synthesis and characterization of zno/cds photocatalyst for methylene blue degradation under led light / salma izati sinar mashuri
granting_institution Universiti Teknologi MARA (UiTM)
granting_department Faculty of Applied Science
publishDate 2022
url https://ir.uitm.edu.my/id/eprint/75902/1/75902.pdf
_version_ 1783736089070010368