The optimization of lamination scheme and ply thickness for laminated composite plates / Hamedan Ibrahim
This project is aimed to simulate the failure of selected fiber reinforced composite plates under sinusoidal transverse loading. A mathematical model and computational model are presented for the analysis. Higher Order Shear Deformation plate theory is utilized to predict the deformation of the plat...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2004
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/76913/1/76913.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project is aimed to simulate the failure of selected fiber reinforced composite plates under sinusoidal transverse loading. A mathematical model and computational model are presented for the analysis. Higher Order Shear Deformation plate theory is utilized to predict the deformation of the plates. A failure criterion with the existence of coupling terms to determine the mode of failure for composite plates is employed to predict the failure. The selection of this criterion is made, because of its uniqueness that it includes the coupling terms, which relate the interaction between the longitudinal stress and the transverse stresses. Therefore, it allows the interaction between the fiber properties and the matrix properties in terms of the strength of the material, which other failure criteria have neglected. A program based on a finite element method is utilised using Fotran-90 to determine the lamina stresses. These stresses are then used in the present failure model to determine the First Ply Failure and Last Ply Failure. Finally, the First Ply Failure and Last Ply Failure results for various lay up and ply thickness composite plates are analysed to determine the weakest composite plate and the best lay up or ply thickness. Firstly, with different lay up of lamina for Carbon Epoxy, I simulated some results to find the best lay up for S-Glass Epoxy and Carbon Epoxy plates. Secondly, with different ply thickness for Carbon Epoxy, I simulated some results to find the best ply thickness Carbon Epoxy plates. Lastly, with constant ply thickness and different lay up of lamina for Carbon Epoxy; I simulated some results to find the best lay up for Carbon Epoxy plates. |
|---|