Computer aided learning for metrology students / Ahmad Fhattah Syaifuddin Kamarudin

This project is based on the laboratory experiments done by Metrology students of Faculty of Mechanical Engineering, UiTM. These experiments are selected to initiate this project i.e. Straightness Measurement, Calibration of a Dial Gauge and Angular Measurement. These experiments are transformed int...

全面介紹

Saved in:
書目詳細資料
主要作者: Kamarudin, Ahmad Fhattah Syaifuddin
格式: Thesis
語言:English
出版: 2005
主題:
在線閱讀:https://ir.uitm.edu.my/id/eprint/77374/1/77374.pdf
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This project is based on the laboratory experiments done by Metrology students of Faculty of Mechanical Engineering, UiTM. These experiments are selected to initiate this project i.e. Straightness Measurement, Calibration of a Dial Gauge and Angular Measurement. These experiments are transformed into virtual laboratory system using software. The software of Visual Basic 6.0 is being used for this system. The project also provides a brief overview of the programming part using Visual Basic 6.0 as one of the powerful high level programming language for the virtual laboratory system. Hence, a system has been developed to help students in their learning especially in the field of Metrology. It is hoped that the student's effective learning and their interest in study in this particular subject will increase.