Developing power system analysis application (fault analysis) by using maple / Mohd Zulfikre Mohd Rasib
In power system, the phenomenon of fault is a name given to a situation called a malfunction in the system. Most faults are the results of short circuits which include lightnings and wind of storms. Faults are the major concern in power generation, transmission and distribution since they occur freq...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2007
|
| 主题: | |
| 在线阅读: | https://ir.uitm.edu.my/id/eprint/77999/1/77999.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | In power system, the phenomenon of fault is a name given to a situation called a malfunction in the system. Most faults are the results of short circuits which include lightnings and wind of storms. Faults are the major concern in power generation, transmission and distribution since they occur frequently without warning. The classification of the transmission line faults which are bus voltage, fault and line current are very useful in monitoring and make arrangement of relays, circuit breakers and other protection and control element. In this project, Maple programming is used to develop power system analysis application (fault analysis). The program which is develop for this project can be used to estimate the total fault current, bus voltage and line current when the input such as bus location and fault reactance are selected. The result is given for each type of fault such as balanced fault, single line to ground fault, line to line fault and double line to ground fault. Test results indicate that the Maple programming can develop power system analysis application which is accurate and significant. |
|---|