The design and simulation of radio receiver at the frequency of 2.4GHz / Shazri Hidayat Abd Shukor

This project is about designing and simulating a radio receiver system that operates at the frequency of 2.4G Hz. To make the radio receiver system, three components have to be designed which are antenna, filter and also amplifier. The design started with calculations and then the values were insert...

全面介绍

Saved in:
书目详细资料
主要作者: Abd Shukor, Shazri Hidayat
格式: Thesis
语言:English
出版: 2008
主题:
在线阅读:https://ir.uitm.edu.my/id/eprint/81108/1/81108.pdf
标签: 添加标签
没有标签, 成为第一个标记此记录!
实物特征
总结:This project is about designing and simulating a radio receiver system that operates at the frequency of 2.4G Hz. To make the radio receiver system, three components have to be designed which are antenna, filter and also amplifier. The design started with calculations and then the values were inserted into computer software using EESof Genesys. The initial circuits have to be simulated to view the performance and improvements to get the best circuits. All these three circuits are then combined to form a radio receiver that operates at the frequency of 2.4G Hz. For the hardware, the antenna was fabricated and tested using V.N.A machine. The results obtained then will be compared with the theoretical values for studies purposes. 2.4G Hz is high frequency and it is chosen because it is specified for Automatic Vehicle Identification (A.V.I) globally. This project will further enhance and can be used for many communication purposes.