Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias
Hyperthermia is an alternative treatment for cancer procedure, which utilizes high temperature of 410C-460C for cancer cells denaturation into necrotic cells. In particular, hyperthermia treatment procedure (HTP) has been employed as therapeutic systems in oncology to overcome the limitations of con...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2019
|
| Online Access: | https://ir.uitm.edu.my/id/eprint/82270/1/82270.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my-uitm-ir.82270 |
|---|---|
| record_format |
uketd_dc |
| spelling |
my-uitm-ir.822702023-11-24T02:47:30Z Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias 2019 Lias, Kasumawati Hyperthermia is an alternative treatment for cancer procedure, which utilizes high temperature of 410C-460C for cancer cells denaturation into necrotic cells. In particular, hyperthermia treatment procedure (HTP) has been employed as therapeutic systems in oncology to overcome the limitations of conventional therapeutics such as infertility, radiation injury and massive bleeding. However, poor penetration depth and focusing capability on the treated tissue of an existing applicator contribute to the low success rates of hyperthermia cancer treatment, especially when non-invasive treatment was concerned. Hence, this research is conducted to develop a modified rectangular microstrip applicator for hyperthermia treatment to improve the limitations, and thus increase the success rate of hyperthermia cancer treatment. Besides, the adverse health effects from available applicators such as the unwanted hot area surrounding cancer tissue would reduce with the improvement of the applicator focusing capability. A conventional rectangular microstrip antenna is selected as the main element of the applicator since it has shown good penetration depth and focus position distance with its simple structure. The antenna is modified by adding a structure of rectangular corner with Y-slot and then integrated with a metal antenna lens structure, to form a proposed applicator for hyperthermia breast cancer treatment. A SEMCAD X simulator software is used to design, develop, modify, and carry out EM-simulation of the hyperthermia applicator. A simulated breast phantom also constructed with SEMCAD X software. The breast phantom is developed using actual human breast character parameters to observe the specific absorption rate (SAR) distribution that use to determine depth penetration and focusing energy distances. The results have shown a penetration depth up to 80mm, and the focus energy position for breast cancer treatment could be better controlled with an energy focus distance between 20 mm to 80 mm. Therefore, it resulted in reducing the unwanted hotspots, which then decrease the adverse health effects on the surrounding healthy tissues. A water bolus is then added to the treatment procedure to complete the setup arrangement for HTP execution. Based on the observation, the addition of water bolus can reshape the effective field size (EFS) of the SAR deposition. In summary, the proposed modified rectangular microstrip applicator can improve penetration depth and EM energy focus capability. It is envisaged that an improved penetration depth and energy focusing capability can increase the success rate of hyperthermia cancer treatment. However, for further research, it is recommended to carry out experiments by fabricating this prototype applicator to further verify the outcomes of this research. 2019 Thesis https://ir.uitm.edu.my/id/eprint/82270/ https://ir.uitm.edu.my/id/eprint/82270/1/82270.pdf text en public phd doctoral Universiti Teknologi MARA (UiTM) Faculty of Electrical Engineering Buniyamin, Norlida |
| institution |
Universiti Teknologi MARA |
| collection |
UiTM Institutional Repository |
| language |
English |
| advisor |
Buniyamin, Norlida |
| description |
Hyperthermia is an alternative treatment for cancer procedure, which utilizes high temperature of 410C-460C for cancer cells denaturation into necrotic cells. In particular, hyperthermia treatment procedure (HTP) has been employed as therapeutic systems in oncology to overcome the limitations of conventional therapeutics such as infertility, radiation injury and massive bleeding. However, poor penetration depth and focusing capability on the treated tissue of an existing applicator contribute to the low success rates of hyperthermia cancer treatment, especially when non-invasive treatment was concerned. Hence, this research is conducted to develop a modified rectangular microstrip applicator for hyperthermia treatment to improve the limitations, and thus increase the success rate of hyperthermia cancer treatment. Besides, the adverse health effects from available applicators such as the unwanted hot area surrounding cancer tissue would reduce with the improvement of the applicator focusing capability. A conventional rectangular microstrip antenna is selected as the main element of the applicator since it has shown good penetration depth and focus position distance with its simple structure. The antenna is modified by adding a structure of rectangular corner with Y-slot and then integrated with a metal antenna lens structure, to form a proposed applicator for hyperthermia breast cancer treatment. A SEMCAD X simulator software is used to design, develop, modify, and carry out EM-simulation of the hyperthermia applicator. A simulated breast phantom also constructed with SEMCAD X software. The breast phantom is developed using actual human breast character parameters to observe the specific absorption rate (SAR) distribution that use to determine depth penetration and focusing energy distances. The results have shown a penetration depth up to 80mm, and the focus energy position for breast cancer treatment could be better controlled with an energy focus distance between 20 mm to 80 mm. Therefore, it resulted in reducing the unwanted hotspots, which then decrease the adverse health effects on the surrounding healthy tissues. A water bolus is then added to the treatment procedure to complete the setup arrangement for HTP execution. Based on the observation, the addition of water bolus can reshape the effective field size (EFS) of the SAR deposition. In summary, the proposed modified rectangular microstrip applicator can improve penetration depth and EM energy focus capability. It is envisaged that an improved penetration depth and energy focusing capability can increase the success rate of hyperthermia cancer treatment. However, for further research, it is recommended to carry out experiments by fabricating this prototype applicator to further verify the outcomes of this research. |
| format |
Thesis |
| qualification_name |
Doctor of Philosophy (PhD.) |
| qualification_level |
Doctorate |
| author |
Lias, Kasumawati |
| spellingShingle |
Lias, Kasumawati Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| author_facet |
Lias, Kasumawati |
| author_sort |
Lias, Kasumawati |
| title |
Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| title_short |
Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| title_full |
Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| title_fullStr |
Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| title_full_unstemmed |
Modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / Kasumawati Lias |
| title_sort |
modified rectangular microstrip applicator for noninvasive hyperthermia breast cancer treatment / kasumawati lias |
| granting_institution |
Universiti Teknologi MARA (UiTM) |
| granting_department |
Faculty of Electrical Engineering |
| publishDate |
2019 |
| url |
https://ir.uitm.edu.my/id/eprint/82270/1/82270.pdf |
| _version_ |
1783736346472349696 |