Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed

Small-wire submerged arc welding is a welding process where the weld pool is submerged in granulates flux. It is different with the conventional SAW by the choice of filler wire which is 1.2mm. The most common problem encountered in small-wire SAW welding process is that the difficulty to determine...

全面介绍

Saved in:
书目详细资料
主要作者: Mohamed, Mohamad Faruqi
格式: Thesis
语言:English
出版: 2018
主题:
在线阅读:https://ir.uitm.edu.my/id/eprint/86944/1/86944.pdf
标签: 添加标签
没有标签, 成为第一个标记此记录!
实物特征
总结:Small-wire submerged arc welding is a welding process where the weld pool is submerged in granulates flux. It is different with the conventional SAW by the choice of filler wire which is 1.2mm. The most common problem encountered in small-wire SAW welding process is that the difficulty to determine the correct welding parameter for desired output bead geometry. The common approach is selection by trial and error can lead to waste of time, cost and energy. Therefore, in order to solve the problem a system was developed which can predict the weld bead geometry.