Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel

The laser marking process is a laser-assisted material removing machining technique which utilize heat to remove the material. In laser marking process, the surface of material is heat up and subsequently vaporize the work piece. The study reviews the different laser marking procedure with various i...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohd Noor Firdaus, Haron
Format:	Thesis
Language:	English
Published:	2021
Subjects:	TA Engineering (General) Civil engineering (General) TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/34940/1/Parametric%20study%20of%20laser%20marking%20process%20using%20grey%20taguchi%20method%20utilizing%20fiber%20laser%20system.ir.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-ump-ir.34940
record_format	uketd_dc
spelling	my-ump-ir.349402022-08-17T03:42:45Z Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel 2021-06 Mohd Noor Firdaus, Haron TA Engineering (General). Civil engineering (General) TJ Mechanical engineering and machinery The laser marking process is a laser-assisted material removing machining technique which utilize heat to remove the material. In laser marking process, the surface of material is heat up and subsequently vaporize the work piece. The study reviews the different laser marking procedure with various input parameters which are taken for different work piece materials. It is difficult to obtain and optimize the cross-relation between the design parameters with input factors that contribute to the output performance factor. This study parametrically optimizes the fiber laser marking parameters for stainless steel AISI 304. The purpose of study is to have marking's quality with short period of time prediction to ensure a lower cost optimization approached. With the use of Grey Taguchi method for the laser marking, different design parameters and input factors are possible to be optimized for better output performance. Design of experiment of the fiber laser marking process was conducted on AISI 304 stainless steel material. L9 orthogonal array was applied it means 9 set of laser marking samples setup were tested. The research applied frequency, marking speed and marking loop as input parameters while the output parameters were the surface roughness, indentation and material removal rate. Based on the design of experiment for the Grey Taguchi approach, an optimum fiber laser design parameters were calculated with the consideration of noise ratio factor. Various process response behaviors were taken into account for full spectrum of the fiber laser marking performance ability. By interpret the Grey Taguchi results, it was concluded that the best setup were at frequency 60 Hz., speed 800mm/s and mark loop at 30 times. It is concluded by verification test, the optimization setup shows a good laser marking performance. The effect of the input parameters were frequency is 33.11 %, marking speed is 24.79% and marking loop is 14.99 % for the optimized laser marking process. 2021-06 Thesis http://umpir.ump.edu.my/id/eprint/34940/ http://umpir.ump.edu.my/id/eprint/34940/1/Parametric%20study%20of%20laser%20marking%20process%20using%20grey%20taguchi%20method%20utilizing%20fiber%20laser%20system.ir.pdf pdf en public masters Universiti Malaysia Pahang Faculty of Mechanical and Automotive Engineering Technology
institution	Universiti Malaysia Pahang Al-Sultan Abdullah
collection	UMPSA Institutional Repository
language	English
topic	TA Engineering (General) Civil engineering (General) TJ Mechanical engineering and machinery
spellingShingle	TA Engineering (General) Civil engineering (General) TJ Mechanical engineering and machinery Mohd Noor Firdaus, Haron Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
description	The laser marking process is a laser-assisted material removing machining technique which utilize heat to remove the material. In laser marking process, the surface of material is heat up and subsequently vaporize the work piece. The study reviews the different laser marking procedure with various input parameters which are taken for different work piece materials. It is difficult to obtain and optimize the cross-relation between the design parameters with input factors that contribute to the output performance factor. This study parametrically optimizes the fiber laser marking parameters for stainless steel AISI 304. The purpose of study is to have marking's quality with short period of time prediction to ensure a lower cost optimization approached. With the use of Grey Taguchi method for the laser marking, different design parameters and input factors are possible to be optimized for better output performance. Design of experiment of the fiber laser marking process was conducted on AISI 304 stainless steel material. L9 orthogonal array was applied it means 9 set of laser marking samples setup were tested. The research applied frequency, marking speed and marking loop as input parameters while the output parameters were the surface roughness, indentation and material removal rate. Based on the design of experiment for the Grey Taguchi approach, an optimum fiber laser design parameters were calculated with the consideration of noise ratio factor. Various process response behaviors were taken into account for full spectrum of the fiber laser marking performance ability. By interpret the Grey Taguchi results, it was concluded that the best setup were at frequency 60 Hz., speed 800mm/s and mark loop at 30 times. It is concluded by verification test, the optimization setup shows a good laser marking performance. The effect of the input parameters were frequency is 33.11 %, marking speed is 24.79% and marking loop is 14.99 % for the optimized laser marking process.
format	Thesis
qualification_level	Master's degree
author	Mohd Noor Firdaus, Haron
author_facet	Mohd Noor Firdaus, Haron
author_sort	Mohd Noor Firdaus, Haron
title	Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
title_short	Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
title_full	Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
title_fullStr	Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
title_full_unstemmed	Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
title_sort	parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel
granting_institution	Universiti Malaysia Pahang
granting_department	Faculty of Mechanical and Automotive Engineering Technology
publishDate	2021
url	http://umpir.ump.edu.my/id/eprint/34940/1/Parametric%20study%20of%20laser%20marking%20process%20using%20grey%20taguchi%20method%20utilizing%20fiber%20laser%20system.ir.pdf
_version_	1783732218315669504

Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel

Similar Items