Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation

Predictive methods appear to be the most effective way to solve springback in sheet metal forming. The accuracy of the predictions depends upon the application of accurate material modelling. Experimental devices and methods are being continuously improved to incorporate increasingly accurate plasti...

Full description

Saved in:

Bibliographic Details
Main Author:	Jasri, Mohamad
Format:	Thesis
Language:	English
Published:	2013
Subjects:	TS Manufactures
Online Access:	http://umpir.ump.edu.my/id/eprint/9022/1/JASRI%20BIN%20MOHAMAD.PDF
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-ump-ir.9022
record_format	uketd_dc
spelling	my-ump-ir.90222021-08-19T05:34:16Z Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation 2013 Jasri, Mohamad TS Manufactures Predictive methods appear to be the most effective way to solve springback in sheet metal forming. The accuracy of the predictions depends upon the application of accurate material modelling. Experimental devices and methods are being continuously improved to incorporate increasingly accurate plastic bending characteristics. As part of these efforts, a new tool has been developed to test and record the characteristics of sheet metal deformation by investigating the Bauschinger effect factors (BEF) and the identified hardening parameters. The developed tool is believed to simulate the actual forming conditions of bending and provide more reliable information. The initial experimental investigation shows that the Bauschinger effect does occur during bending and unbending loadings in sheet metal forming. The BEF value was found to increase as the thickness increases. Therefore this justifies the need to consider the Bauschinger effect in sheet metal forming simulation through the use of relevant constitutive equations. A direct optimization method has been successfully applied to identify material hardening parameters from the acquired experimental data of the newly developed tool. The optimisation result shows that nonlinear kinematic hardening and nonlinear mixed hardening models are capable of fitting the smooth transition curve of the experimental hardening data. Mixed hardening model performance however is considered to be much better as proven by lower residual or fitting error values. This justifies the idea that the application of a mixed hardening model is more suitable for springback simulation in sheet metal forming. Validation work was conducted in order to test the effectiveness of applying the two hardening models by incorporating the identified parameters in predicting springback using finite element simulation. Of the two, the mixed hardening modelling has been proven to provide better simulation results in predicting springback. 2013 Thesis http://umpir.ump.edu.my/id/eprint/9022/ http://umpir.ump.edu.my/id/eprint/9022/1/JASRI%20BIN%20MOHAMAD.PDF application/pdf en public phd doctoral University of Strathclyde Faculty of Engineering
institution	Universiti Malaysia Pahang Al-Sultan Abdullah
collection	UMPSA Institutional Repository
language	English
topic	TS Manufactures
spellingShingle	TS Manufactures Jasri, Mohamad Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
description	Predictive methods appear to be the most effective way to solve springback in sheet metal forming. The accuracy of the predictions depends upon the application of accurate material modelling. Experimental devices and methods are being continuously improved to incorporate increasingly accurate plastic bending characteristics. As part of these efforts, a new tool has been developed to test and record the characteristics of sheet metal deformation by investigating the Bauschinger effect factors (BEF) and the identified hardening parameters. The developed tool is believed to simulate the actual forming conditions of bending and provide more reliable information. The initial experimental investigation shows that the Bauschinger effect does occur during bending and unbending loadings in sheet metal forming. The BEF value was found to increase as the thickness increases. Therefore this justifies the need to consider the Bauschinger effect in sheet metal forming simulation through the use of relevant constitutive equations. A direct optimization method has been successfully applied to identify material hardening parameters from the acquired experimental data of the newly developed tool. The optimisation result shows that nonlinear kinematic hardening and nonlinear mixed hardening models are capable of fitting the smooth transition curve of the experimental hardening data. Mixed hardening model performance however is considered to be much better as proven by lower residual or fitting error values. This justifies the idea that the application of a mixed hardening model is more suitable for springback simulation in sheet metal forming. Validation work was conducted in order to test the effectiveness of applying the two hardening models by incorporating the identified parameters in predicting springback using finite element simulation. Of the two, the mixed hardening modelling has been proven to provide better simulation results in predicting springback.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Jasri, Mohamad
author_facet	Jasri, Mohamad
author_sort	Jasri, Mohamad
title	Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
title_short	Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
title_full	Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
title_fullStr	Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
title_full_unstemmed	Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
title_sort	springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation
granting_institution	University of Strathclyde
granting_department	Faculty of Engineering
publishDate	2013
url	http://umpir.ump.edu.my/id/eprint/9022/1/JASRI%20BIN%20MOHAMAD.PDF
_version_	1783731947030183936

Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation

Similar Items