Effect of heat treatment on hardness and wear properties of an aluminum alloy of motorcycle piston

Effect of heat treatment on hardness and wear properties of an aluminum alloy of motorcycle piston

The present study was undertaken to investigate the effect of heat treatment on the microstructure, hardness and wear of aluminum alloys piston and with the aim to improve the mechanical properties by using heat treatment method. The material is from aluminum alloys piston; produced by one of Malays...

Saved in:

書目詳細資料
主要作者:	Mohd Fizam, Hj. Zainon
格式:	Thesis
語言:	English
主題:	Heat treatment Alluminium alloys piston Piston Aluminium
在線閱讀:	http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/12911/1/p.%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/12911/2/Full%20Text.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effects of solution treatment temperature on the mechanical properties of commercial recycled aluminium alloy cylinder head (A319)
由: Murizam, Darus

A study of the wear of piston seals and cylinder in a reciprocating water pump /
由: Ng, Wah Lok
出版: (1989)

Characterization and tribo-mechanical properties of sic reinforced aluminum-copper matrix composite for automotive piston /
由: Arifutzzaman, A.K.H.A. MA
出版: (2013)

Study of microstructure and ageing characteristic of aluminium alloy reinforced with glass particulates
由: Hadipramana, Josef

Effects of piston crown profiles on performance of a gasoline homogeneous charge compression ignition engine using computational fluid dynamics
由: Jasim, Hassan Abdulhadi
出版: (2016)

Kajian tribologi gelang omboh dalam enjin automatif gas asli termampat /
由: Elvis Adril
出版: (2008)

Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy
由: Jacob, M. Suresh Devanesan
出版: (2006)

Characterization of age hardening treatment of AA6061 Aluminium alloy through destructive and non-destructive testing techniques
由: Toozandehjani, Meysam
出版: (2014)

Gerakan gelangsar-omboh dan fenomena ketakseimbangan enjin linear /
由: Syarizal Fonna
出版: (2006)

Simulation of Fatigue Crack Growth in Friction Stir-Welded Joints of 2024-T351 Aluminum Alloy
由: Golestaneh, Amirreza Fahim
出版: (2008)

Investigation on tribological (wear) properties of aluminum-silicon piston alloy /
由: Tuti Yasmin Alias
出版: (2003)

Effects of deformation and recrystallization on mechanical properties of 7075 aluminum alloy /
由: Tajally, Mohammad
出版: (2010)

Post-weld heat treatment cracking in Rene 80 and effect of pre-weld heat treatment /
由: Yi, Jianzhang
出版: (1998)

Cyclic overageing pre-weld heat treatment for nickel-based superalloy-Rene 80 /
由: Liu, Ning
出版: (1998)

Kinetics of grain growth in 2024-T3 aluminium alloy /
由: Tuan Zaharinie Tuan Zahari
出版: (2009)

Microscopic Study of 5083-H321 Aluminium Alloy Under Fretting Fatigue Condition
由: Eslamian, Saeed
出版: (2005)

Surface modification of aluminium-zinc alloy (AA7075) and its corrosion characteristics /
由: Angel Richard
出版: (2018)

Surface modification of aluminium alloy series 6 (AA6061 T657) and its corrosion characteristics /
由: Tseu, Christopher Zia Chyuan
出版: (2019)

Pembangunan enjin penjana linear dengan ruang tendang balik udara /
由: Syahril
出版: (2005)

Analisis ciri sambutan getaran dan pengoptimuman enjin omboh bebas /
由: Nuraini Abdul Aziz
出版: (2009)

Dry sliding wear of some commercial wrought aluminium alloys /
由: Mariyam Jameelah Ghazali
出版: (2005)

Development of anodised aluminium oxide nanostructure from Al-Mn alloy
由: Voon, Chun Hong

Electrodeposition and heat treatment studies of nickel-zinc alloys /
由: Chen, Tik Lung
出版: (1973)

Characterization of heat affected zone for tig torch welded high strength low alloy steel with microalloying elements addition /
由: Abdullrhman, Musa Moh.H
出版: (2020)

Improved machinability of titanium alloy TI-6AL-4V through workpiece preheating /
由: Ginta, Turnad Lenggo
出版: (2010)

Effect of heat treatment on optical, elastic and thermal properties of silica borotellurite glass doped with manganese
由: Ismail, Zaitizila
出版: (2019)

A study on machining characteristics of strontium modifies LM-6 alloy /
由: Hajjaj, Sami Salama
出版: (2007)

Physical and wear properties of aluminium matrix composite reinforced with PSAC and slag fabricated via powder metallurgy
由: Zamri, Yusoff

Fabrikasi dan penganodan komposit metalurgi serbuk aluminium-magnesium diperkuat gentian pendek alumina saffil
由: Kamrosni, Abdul Razak

Pencirian nanoaloi A1-Cu yang disediakan denga kaedah aloian mekanik /
由: Ali Oemar, Marjoni Imamora
出版: (2005)

To study the effect of variable loading on fatigue properties of heat treated aluminum alloy 6063-T5 / William Lenjau
由: Lenjau, William
出版: (2003)

Computer simulation of laser annealing of silicon and aluminum /
由: Sin, Eak Hoa
出版: (1987)

Hybrid microwave sintering of zinc aluminum alloy /
由: Maisarah Lutfi
出版: (2012)

Investigation on mechanical and wear properties of strontium modified aluminium-silicon alloy /
由: Adibah Amir
出版: (2008)

Physical and optical characterization of yttrium aluminum monoclinic prepared via citrate-nitrate sol-gel and mechanical alloying method
由: Mohd Zawawi, Mohd Khairul Ikhwan
出版: (2014)

Zinc oxide and copper oxide synthesized by thermal treatment method
由: Lee, Phin Jit
出版: (2014)

Mechanical and tribological enhancement of AA6063 aluminum alloy using solid sphere fly ash particles reinforcement
由: Razzaq, Alaa Mohammed
出版: (2018)

Stress analysis of the piston due to heat transfer using finite element analysis (FEA) Software / Mohd. Zulkifli Salleh
由: Salleh, Mohd. Zulkifli
出版: (2005)

Heat distribution of magnesium alloys (AZ31B) on electro discharge machining using finite element analysis /
由: Muhammad Izzuddin Zakaria
出版: (2018)

Dynamic axial and oblique crushing of foam-filled aluminium conical tubes
由: Fauziah, Mat

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group