The effect of filler loading and coupling agent on properties of bentonite filled recycled high density polyethylene composites
Recycled high density polyethylene/ bentonite (RHDPE/Bentonite) composites had been prepared using Brabender Plasticorder at temperature 160˚C and rotor speed of 50 rpm. The effect of Bentonite loading and coupling agent on tensile properties, swelling behavior, morphology analysis, and spectroscop...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 主題: | |
| 在線閱讀: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/41294/1/Page%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/41294/2/Full%20text.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Recycled high density polyethylene/ bentonite (RHDPE/Bentonite) composites had
been prepared using Brabender Plasticorder at temperature 160˚C and rotor speed of 50 rpm. The effect of Bentonite loading and coupling agent on tensile properties, swelling behavior, morphology analysis, and spectroscopy infrared (FTIR) analysis on
RHDPE/Bentonite composites were studied. The result showed that the addition of
Bentonite reduced the tensile strength, elongation at break and weight swell percentage
of composites, whereas the Young’s modulus increased. Coupling agent such as
polyethylene graft maleic anhydride (PEgMAH) and maleic anhydride (MAH) were
used, which resulted in positive effect on mechanical properties, and reduce the weight
swelling percentage of RHDPE/Bentonite composites. The
RHDPE/Bentonite/PEgMAH composites have higher tensile strength, Young’s
modulus, and elongation at break but lower weight swell percentage compared to the
RHDPE/Bentonite/MAH composites. The scanning electron microscopy (SEM)
micrographs of tensile fractured surfaces for the RHDPE/Bentonite composites with
coupling agents of PEgMAH and MAH indicated that the interfacial adhesion between
Bentonite and RHDPE composites were better than the RHDPE/Bentonite composites
without the coupling agents. |
|---|