Study of the weld pool shape variations with the welding parameters for optimization under tig welding process

Study of the weld pool shape variations with the welding parameters for optimization under tig welding process

This study investigated the multi-response optimization of tungsten inert gas welding (TIG) process for an optimal parametric combination to yield favourable weld pool shape of welded joints using the Taguchi and Grey relational analysis method. Four experimental runs based on L4(23) orthogonal arr...

Saved in:

书目详细资料
主要作者:	Liha, Lateng
格式:	Thesis
语言:	English
主题:	Inert tungsten inert gas welding (TIG) Weldings TIG welding
在线阅读:	http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/61518/1/Page%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/61518/2/Full%20text.pdf
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Microstructural features and properties of TIG melted AISI 430 ferritic stainless steel welds /
由: Amuda, Muhammed Olawale Hakeem
出版: (2011)

Process parameter optimization of welding turbine stage 4 blades using Taguchi method /
由: Lee, Chan Wai
出版: (2009)

A computational study of the heat and fluid flow phenomena in stationary GTA weld pool /
由: Ng, Sonny Hock Chuan
出版: (1993)

Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub
由: Yaakub, Mohamad Yazman
出版: (2014)

To obtained the optimum parameters for welding of copper and carbon steel using friction welding technique / Rayner Benjamin
由: Benjamin, Rayner
出版: (2010)

To obtain the optimum parameters for welding of stainless steel using friction welding technique / Mohd Azne Mohd Yunos
由: Mohd Yunos, Mohd Azne
出版: (2010)

Characterization of heat affected zone for tig torch welded high strength low alloy steel with microalloying elements addition /
由: Abdullrhman, Musa Moh.H
出版: (2020)

To obtain the optimum parameters for welding of aluminium using friction welding technique / Mohsin Marhaban
由: Marhaban, Mohsin
出版: (2010)

Optimization of mig welding process parameters on mechanical properties of Al-MS-SS materials
由: Nik Nur Fatihah, Che Hassan

Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin
由: Samsudin, Muhamad 'Afif
出版: (2009)

Improved welding refurbishment procedure for superalloys gas turbine using fea with experimental verification / Mohd Sarizal Abu Bakar
由: Abu Bakar, Mohd Sarizal
出版: (2014)

Mechanical characterization of AA6061-T6 aluminum alloy friction stir and tungsten arc welded with and without post-weld heat treatment
由: Fadaeifard, Firouz
出版: (2016)

Friction stir welding of aluminum alloy to polycarbonate sheet /
由: Mohd Rahmat Firman Sahifulddin
出版: (2014)

Friction stir welding of aluminium alloy (AA 5052): experimental and simulation /
由: Moshwan, Raza
出版: (2014)

Design and fabrication of mechanized welding traction system / Muhamad Hairi Hamid
由: Hamid, Muhamad Hairi
出版: (2010)

Technical evaluation of shield metal arc welding process before and after post weld heat treatment /
由: Mohd Ansari Amir Hamzah

Development of drive system for orbital pipe welding and cutting / Mohamad Bazli Kasim
由: Kasim, Mohamad Bazli
出版: (2010)

Integration of travel control system with traverse test rig for friction stir welding process / Nur'Amirah Busu
由: Busu, Nur'Amirah
出版: (2017)

The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri
由: Zahuri, Zairee Ezzam
出版: (2010)

Studying the influence of varying root opening of joint design on the weld strength / Akramin Mohd Zuhudi
由: Mohd Zuhudi, Akramin
出版: (2005)

The employment of advanced fiber laser technology to weld dissimilar materials : stainless steel and aluminum alloy using pre-placed powder-based activating flux and filler /
由: Ezazi, Mohammadamin
出版: (2015)

Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
由: Mohammed Redza, Mohd Ridhwan
出版: (2016)

Evaluation and analysis various types of welding imperfections collected from the steel fabricators / Wan Muhd Adham Wan Ahmad
由: Wan Ahmad, Wan Muhd Adham
出版: (2010)

Quality edge build-up by automatic pulsed micro-plasma arc welding /
由: Bai Yu
出版: (1998)

Frequency response function (FRF) based model updating for a laser spot welded structure / Mohd Syazwan Mohd Zin
由: Mohd Zin, Mohd Syazwan
出版: (2018)

Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah
由: Armansyah, Armansyah
出版: (2020)

Development and characterization of hard coating layer on CP-Ti using Fe-C-Si powder mixture /
由: Adekunle, Adeleke Sakiru
出版: (2015)

A study on corrosion analysis of powder addition in al-sus 304 friction stir welding /
由: Muhaini Manshor
出版: (2015)

Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad
由: Muhammad, Norasiah
出版: (2015)

Thermal stress analysis of butt welded joint /
由: Karthikeyan Balasubramaniam
出版: (2013)

Study on properties of dissimilar metal welding between stainless steel (AISI 304L) and mild steel (AISI 1018). / Mohd Soleham Juraimi Kamarudin
由: Kamarudin, Mohd Soleham Juraimi
出版: (2009)

Welding parameter optimization using Taguchi method and Grey Relational Analysis for Gas Metal Arc Welding A1008 butt-joint
由: Mattar, Zainal Abidin Shah
出版: (2013)

Effects of new and recycle flux on the mechanical properties of submerged arc welded (SAW) line pipe grade X52M and X65M /
由: Meor Mohd Adli Taib
出版: (2020)

Spot welding quality check using artificial intelligence /
由: Jagadisa Rajarathnam
出版: (2018)

Prediction of weld bead geometry of small-wire submerged arc welding in 1G position / Mohamad Faruqi Mohamed
由: Mohamed, Mohamad Faruqi
出版: (2018)

Investigation on the mechanical properties and microstructure analysis of micro-resistance spot welding between stainless steel 316L and Tl-6AL-4V /
由: Muhammad Safwan Mohd. Mansor
出版: (2020)

A study on the effect of heat input to the fracture toughness of SA36 low carbon steel weld metal / Zulkifli Ahmad Manshor
由: Ahmad Manshor, Zulkifli
出版: (2006)

Study on dissimilar material joining between polymer and metals by using laser welding and friction stir welding /
由: Farazila Yusof
出版: (2011)

Corrosion behaviour of friction stir welded lap joints of 6061-t6 aluminum alloy
由: Gharavi, Farhad
出版: (2014)

Study on heat input for superalloy welding by using FEA simulation and experimental verification / Gege Nurfaizee Fadzil.
由: Fadzil, Gege Nurfaizee
出版: (2009)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group