Flux density and power loss distribution in 100kVA Distribution Transformer core assembled with different cutting angle of T-joint
The power losses occurring under magnetising condition have received a great deal of attention for a long time. The transformer designs with Butt Lap joint cause the highest power loss at the T-joint. These due to the flux need to rotate 90º into the hard direction and transfer up and down to the ad...
Saved in:
主要作者: | Shuhaimi, Zakaria@Abdullah |
---|---|
格式: | Thesis |
语言: | English |
主题: | |
在线阅读: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/9811/1/Page%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/9811/2/Full%20Text.pdf |
标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
相似书籍
-
Evaluation of localized flux and loss distribution in the corner joint and T joint of 1000 kVA transformer core
由: Shahanom, Uthman -
The effect of lamination thickness of transformer core on the flux and power loss distribution using grain-oriented 3.1% silicon iron
由: Nor Ashbahani, Mohamad Kajaan -
The effect of different stator slot size on flux and losses distribution in 0.5 hp induction motor
由: Nor Shafiqin, Shariffuddin -
The influence of seasonal changes on physico-chemical characteristics of seawater in Sepangar and Gaya Bays, Sabah
由: Tamrin Toha
出版: (2008) -
Modelling of current transformer for the application of error estimation, estimation factor and ratio error
由: Khairul Anuar, Mohd Nor