Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption

Palm oil production involves multi-stage processes which release large volume of palm oil mill effluent (POME). Due to its high polluting environmental impact, POME must be treated prior to discharge. Integrated electrocoagulation (EC)-adsorption (AD) process has shown great potential to remove vari...

Full description

Saved in:
Bibliographic Details
Main Author: Sia, Yong Yin
Format: Thesis
Language:English
Published: 2020
Subjects:
Online Access:http://ir.unimas.my/id/eprint/29956/1/Sia.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-unimas-ir.29956
record_format uketd_dc
institution Universiti Malaysia Sarawak
collection UNIMAS Institutional Repository
language English
topic TD Environmental technology
Sanitary engineering
spellingShingle TD Environmental technology
Sanitary engineering
Sia, Yong Yin
Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
description Palm oil production involves multi-stage processes which release large volume of palm oil mill effluent (POME). Due to its high polluting environmental impact, POME must be treated prior to discharge. Integrated electrocoagulation (EC)-adsorption (AD) process has shown great potential to remove various organic and inorganic pollutants from wastewater. Up to date, no study has been found yet on POME treatment using integrated EC-AD process. Therefore, this study aims to investigate the feasibility of integrated EC-AD process as an alternative treatment for POME. In this study, EC was run simultaneously with AD to treat POME. The integrated EC-AD process achieved the highest removal of total suspended solid (TSS), chemical oxygen demand (COD), colour and total organic carbon (TOC) as compared to EC and AD stand-alone processes. The integrated EC-AD process successfully reduced 74-98% of TSS, 33-93% of COD, 85-99% of colour and 82-100% of TOC from POME at various POME initial concentrations ranging from 20% to 100%. The adsorption equilibrium of TSS was best fitted by the Langmuir isotherm whereas the adsorption of COD, colour and TOC were better interpreted by the Freundlich isotherm. This implied that the coconut shell-based activated carbon (CSAC) used in this study had both homogeneous and heterogeneous surfaces. The adsorption kinetics of TSS, COD, colour and TOC onto CSAC were fitted well by both pseudo-second-order (PSO) and Elovich kinetic models, which indicated that the adsorption process was mainly controlled by chemical sorption. The intra-particle diffusion (IPD) model plots showed that the adsorption was controlled by both IPD and film diffusion. Boyd plots further confirmed that the adsorption process was controlled by film diffusion. On the other hand, for EC, the adsorption equilibrium of TSS, colour and TOC onto aluminum (Al) hydroxide complexes were best fitted by the Freundlich isotherm whereas the adsorption of TSS was better interpreted by the Langmuir isotherm. This implied that the Al hydroxide complexes had both homogeneous and heterogeneous surfaces. The adsorption kinetics of TSS, COD, colour and TOC onto Al hydroxide complexes showed that the adsorption process for EC was mainly controlled by chemical sorption. Overall, the integrated EC-AD process has demonstrated great potential for POME treatment, and could be recommended as an alternative treatment method for wastewater.
format Thesis
qualification_level Master's degree
author Sia, Yong Yin
author_facet Sia, Yong Yin
author_sort Sia, Yong Yin
title Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
title_short Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
title_full Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
title_fullStr Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
title_full_unstemmed Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption
title_sort palm oil mill effluent (pome) treatment using electrocoagulation and adsorption
granting_institution Universiti Malaysia Sarawak (UNIMAS)
granting_department Faculty of Engineering
publishDate 2020
url http://ir.unimas.my/id/eprint/29956/1/Sia.pdf
_version_ 1783728373225226240
spelling my-unimas-ir.299562023-07-06T03:55:08Z Palm oil mill effluent (POME) treatment using electrocoagulation and adsorption 2020-01-16 Sia, Yong Yin TD Environmental technology. Sanitary engineering Palm oil production involves multi-stage processes which release large volume of palm oil mill effluent (POME). Due to its high polluting environmental impact, POME must be treated prior to discharge. Integrated electrocoagulation (EC)-adsorption (AD) process has shown great potential to remove various organic and inorganic pollutants from wastewater. Up to date, no study has been found yet on POME treatment using integrated EC-AD process. Therefore, this study aims to investigate the feasibility of integrated EC-AD process as an alternative treatment for POME. In this study, EC was run simultaneously with AD to treat POME. The integrated EC-AD process achieved the highest removal of total suspended solid (TSS), chemical oxygen demand (COD), colour and total organic carbon (TOC) as compared to EC and AD stand-alone processes. The integrated EC-AD process successfully reduced 74-98% of TSS, 33-93% of COD, 85-99% of colour and 82-100% of TOC from POME at various POME initial concentrations ranging from 20% to 100%. The adsorption equilibrium of TSS was best fitted by the Langmuir isotherm whereas the adsorption of COD, colour and TOC were better interpreted by the Freundlich isotherm. This implied that the coconut shell-based activated carbon (CSAC) used in this study had both homogeneous and heterogeneous surfaces. The adsorption kinetics of TSS, COD, colour and TOC onto CSAC were fitted well by both pseudo-second-order (PSO) and Elovich kinetic models, which indicated that the adsorption process was mainly controlled by chemical sorption. The intra-particle diffusion (IPD) model plots showed that the adsorption was controlled by both IPD and film diffusion. Boyd plots further confirmed that the adsorption process was controlled by film diffusion. On the other hand, for EC, the adsorption equilibrium of TSS, colour and TOC onto aluminum (Al) hydroxide complexes were best fitted by the Freundlich isotherm whereas the adsorption of TSS was better interpreted by the Langmuir isotherm. This implied that the Al hydroxide complexes had both homogeneous and heterogeneous surfaces. The adsorption kinetics of TSS, COD, colour and TOC onto Al hydroxide complexes showed that the adsorption process for EC was mainly controlled by chemical sorption. Overall, the integrated EC-AD process has demonstrated great potential for POME treatment, and could be recommended as an alternative treatment method for wastewater. Universiti Malaysia Sarawak, (UNIMAS) 2020-01 Thesis http://ir.unimas.my/id/eprint/29956/ http://ir.unimas.my/id/eprint/29956/1/Sia.pdf text en validuser masters Universiti Malaysia Sarawak (UNIMAS) Faculty of Engineering Adeogun, A. I., & Balakrishnan, R. B. (2017). Kinetics, isothermal and thermodynamics studies of electrocoagulation removal of basic dye rhodamine B from aqueous solution using steel electrodes. Applied Water Science, 7(4), 1711–1723. Ahmad, M. A., Ahmad, N., & Bello, O. S. (2015). Modified durian seed as adsorbent for the removal of methyl red dye from aqueous solutions. Applied Water Science, 5(4), 407–423. Ahmad, M. A., Ahmad Puad, N. A., & Bello, O. S. (2014). Kinetic, equilibrium and thermodynamic studies of synthetic dye removal using pomegranate peel activated carbon prepared by microwave-induced KOH activation. Water Resources and Industry, 6, 18–35. Ahmed, Y., Yaakob, Z., Akhtar, P., & Sopian, K. (2015). Production of biogas and performance evaluation of existing treatment processes in palm oil mill effluent (POME). Renewable and Sustainable Energy Reviews, 42, 1260–1278. Aitbara, A., Cherifi, M., Hazourli, S., & Leclerc, J.-P. (2016). Continuous treatment of industrial dairy effluent by electrocoagulation using aluminum electrodes. Desalination and Water Treatment, 57(8), 3395–3404. Alalm, M. G., Tawfik, A., & Ookawara, S. (2015). Comparison of solar TiO2 photocatalysis and solar photo-Fenton for treatment of pesticides industry wastewater: Operational conditions, kinetics, and costs. Journal of Water Process Engineering, 8, 55–63. Ali Amat, N. A., Tan, Y. H., Lau, W. J., Lai, G. S., Ong, C. S., Mokhtar, N. M., … Lai, S. O. (2015). Tackling colour issue of anaerobically-treated palm oil mill effluent using membrane technology. Journal of Water Process Engineering, 8, 221–226. Ali, R. M., Hamad, H. A., Hussein, M. M., & Malash, G. F. (2016). Potential of using green adsorbent of heavy metal removal from aqueous solutions: Adsorption kinetics, isotherm, thermodynamic, mechanism and economic analysis. Ecological Engineering, 91, 317–332. Aljeboree, A. M., Alshirifi, A. N., & Alkaim, A. F. (2017). Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon. Arabian Journal of Chemistry, 10, S3381–S3393. Alkhatib, M. F., Mamun, A. A., & Akbar, I. (2015). Application of response surface methodology (RSM) for optimization of colour removal from POME by granular activated carbon. International Journal of Environmental Science and Technology, 12(4), 1295–1302. Alnawab, R. M., & Ridha, A. M. (2018). Use of the electrocoagulation with pomegranate peels and zizith’s leaves adsorption coupling technique for removal of methylene blue in a batch system. International Journal of Engineering and Technology(UAE), 7(4), 3451–3458. Amosa, M. K., Jami, M. S., Alkhatib, M. F. R., Tajari, T., Jimat, D. N., & Owolabi, R. U. (2016). Turbidity and suspended solids removal from high-strength wastewater using high surface area adsorbent: Mechanistic pathway and statistical analysis. Cogent Engineering, 3(1), 1–18. Aouni, A., Lafi, R., & Hafiane, A. (2017). Feasibility evaluation of combined electrocoagulation/adsorption process by optimizing operating parameters removal for textile wastewater treatment. Desalination and Water Treatment, 60, 78–87. Arturi, T. S., Seijas, C. J., & Bianchi, G. L. (2019). A comparative study on the treatment of gelatin production plant wastewater using electrocoagulation and chemical coagulation. Heliyon, 5, e01738. Aswathy, P., Gandhimathi, R., Ramesh, S. T., & Nidheesh, P. V. (2016). Removal of organics from bilge water by batch electrocoagulation process. Separation and Purification Technology, 159, 108–115. Ates, H., Dizge, N., & Yatmaz, H. C. (2017). Combined process of electrocoagulation and photocatalytic degradation for the treatment of olive washing wastewater. Water Science and Technology, 75(1), 141–154. Retrieved from http://wst.iwaponline.com/content/75/1/141.abs tract Azadi Aghdam, M., Kariminia, H. R., & Safari, S. (2016). Removal of lignin, COD, and color from pulp and paper wastewater using electrocoagulation. Desalination and Water Treatment, 57(21), 9698–9704. Azmi, N. A., Yunos, K. F. M., & Zakaria, R. (2012). Application of sandwich membrane for the treatment of palm oil mill effluent (POME) for water reuse. Procedia Engineering, 44, 1980–1981. Azmi, N. S., & Yunos, K. F. M. (2014). Wastewater treatment of palm oil mill effluent (POME) by ultrafiltration membrane separation technique coupled with adsorption treatment as pre-treatment. Agriculture and Agricultural Science Procedia, 2, 257–264. Bashir, M. J. K., Mau Han, T., Jun Wei, L., Choon Aun, N., & Abu Amr, S. S. (2016). Polishing of treated palm oil mill effluent (POME) from ponding system by electrocoagulation process. Water Science and Technology, 73(11), 2704–2712. Retrieved from http://wst.iwaponline.co m/content/73/11/2704.abstract Bayar, S., Boncukcuoğlu, R., Yilmaz, A. E., & Fil, B. A. (2014). Pre-treatment of pistachio processing industry wastewaters (PPIW) by electrocoagulation using Al plate electrode. Separation Science and Technology, 49(7), 1008–1018. Bazrafshan, E., Alipour, M. R., & Mahvi, A. H. (2016). Textile wastewater treatment by application of combined chemical coagulation, electrocoagulation, and adsorption processes. Desalination and Water Treatment, 57(20), 9203–9215. Bazrafshan, E., Mohammadi, L., Ansari-Moghaddam, A., & Mahvi, A. H. (2015). Heavy metals removal from aqueous environments by electrocoagulation process – A systematic review. Journal of Environmental Health Science and Engineering, 13(1), 1–16. Bello, M. M., & Abdul Rahman, A. A. (2017). Trend and current practices of palm oil mill effluent polishing : Application of advanced oxidation processes and their future perspectives. Journal of Environmental Management, 198, 170–182. Bello, O. S., & Ahmad, M. A. (2012). Coconut (Cocos nucifera) shell based activated carbon for the removal of malachite green dye from aqueous solutions. Separation Science and Technology, 47(6), 903–912. Benaissa, F., Kermet-Said, H., & Moulai-Mostefa, N. (2016). Optimization and kinetic modeling of electrocoagulation treatment of dairy wastewater. Desalination and Water Treatment, 57(13), 5988–5994. Boyd, G. E., Adamson, A. W., & Myers, L. S. (1947). The exchange adsorption of ions from aqueous solutions by organic zeolites. II. kinetics. Journal of the American Chemical Society, 69(11), 2836–2848. Bustillo-Lecompte, C. F., Mehrvar, M., & Quiñones-Bolaños, E. (2013). Combined anaerobic-aerobic and UV/H2O2 processes for the treatment of synthetic slaughterhouse wastewater. Journal of Environmental Science and Health, Part A, 48(9), 1122–1135. Caccin, M., Giorgi, M., Giacobbo, F., Da Ros, M., Besozzi, L., & Mariani, M. (2016). Removal of lead (II) from aqueous solutions by adsorption onto activated carbons prepared from coconut shell. Desalination and Water Treatment, 57(10), 4557–4575. Castañeda-Díaz, J., Pavón-Silva, T., Gutiérrez-Segura, E., & Colín-Cruz, A. (2017). Electrocoagulation-adsorption to remove anionic and cationic dyes from aqueous solution by PV-energy. Journal of Chemistry, 2017, 1–14. Chan, Y. J., Chong, M. F., & Law, C. L. (2010). Effects of temperature on aerobic treatment of anaerobically digested palm oil mill effluent (POME). Industrial & Engineering Chemistry Research, 49(15), 7093–7101. Chan, Y. J., Chong, M. F., & Law, C. L. (2011). Optimization on thermophilic aerobic treatment of anaerobically digested palm oil mill effluent (POME). Biochemical Engineering Journal, 55(3), 193–198. Cheng, C. K., Deraman, M. R., Ng, K. H., & Khan, M. R. (2016). Preparation of titania doped argentum photocatalyst and its photoactivity towards palm oil mill effluent degradation. Journal of Cleaner Production, 112, 1128–1135. Chin, M. J., Poh, P. E., Tey, B. T., Chan, E. S., & Chin, K. L. (2013). Biogas from palm oil mill effluent (POME): Opportunities and challenges from Malaysia’s perspective. Renewable and Sustainable Energy Reviews, 26, 717–726. Choi, W.-H., Shin, C.-H., Son, S.-M., Ghorpade, P. A., Kim, J.-J., & Park, J.-Y. (2013). Anaerobic treatment of palm oil mill effluent using combined high-rate anaerobic reactors. Bioresource Technology, 141, 138–144. Chou, K. W., Tan, S. W., Morad, N., Tow, T. T., Abdul Kadir, M. O., & Ismail, N. (2016). Aerobic post-treatment of different anaerobically digested palm oil mill effluent (POME). International Journal of Environmental Science and Development, 7(7), 511–515. Chung, C. Y., Selvarajoo, A., Sethu, V., Koyande, A. K., Arputhan, A., & Lim, Z. C. (2018). Treatment of palm oil mill effluent (POME) by coagulation flocculation process using peanut–okra and wheat germ–okra. Clean Technologies and Environmental Policy, 20(9), 1951–1970. Das, D., Samal, D. P., & Bc, M. (2015). Preparation of activated carbon from green coconut shell and its characterization. Chemical Engineering & Process Technology, 6(5), 1–7. De Carvalho, H. P., Huang, J., Zhao, M., Liu, G., Dong, L., & Liu, X. (2015). Improvement of methylene blue removal by electrocoagulation/banana peel adsorption coupling in a batch system. Alexandria Engineering Journal, 54(3), 777–786. Demirci, Y., Pekel, L. C., & Alpbaz, M. (2015). Investigation of different electrode connections in electrocoagulation of textile wastewater treatment. International Journal of Electrochemical Science, 10(3), 2685–2693. Eaton, A. D., Clesceri, L. S., Franson, M. A. H., Greenberg, A. E., & Rice, E. W. (2005). Standard methods for the examination of water & wastewater. American Public Health Association. Retrieved from https://books.google.com.my/books?id=buTn1rmfSI4C El-sayed, G. O., Yehia, M. M., & Asaad, A. A. (2014). Assessment of activated carbon prepared from corncob by chemical activation with phosphoric acid. Water Resources and Industry, 7–8, 66–75. Elazzouzi, M., El Kasmi, A., Haboubi, K., & Elyoubi, M. S. (2018). A novel electrocoagulation process using insulated edges of Al electrodes for enhancement of urban wastewater treatment: Techno-economic study. Process Safety and Environmental Protection (Vol. 116). Freundlich, H. (1907). Über die adsorption in lösungen. Zeitschrift Für Physikalische Chemie (International Journal of Research in Physical Chemistry and Chemical Physics), 57U(1), 385–470. García, C. A., & Hodaifa, G. (2017). Real olive oil mill wastewater treatment by photo-Fenton system using artificial ultraviolet light lamps. Journal of Cleaner Production, 162, 743–753. Ghafoori, S., Shah, K. K., Mehrvar, M., & Chan, P. K. (2014). Pharmaceutical wastewater treatment using granular activated carbon and UV/H2O2 processes: Experimental analysis and modelling. The Canadian Journal of Chemical Engineering, 92(7), 1163–1173. Ghalwa, N. M. A., Musabeh, A. Z., & Farahat, N. B. (2016). Optimization of electrocoagulation (EC) process for the purification of water from 2,4-dichlorophenoxyacetic acid (2,4-D) using sacrificial anodes. International Journal of Innovative Research in Science, Engineering and Technology, 5(3), 2760–2778. Ghalwa, N. M., Musabeh, A. Z., & Farhat, N. B. (2017). Performance efficiency of electrocoagulation adsorption process of oxyfluorfen herbicide from aqueous solutions using different anodes. Journal of Environmental & Analytical Toxicology, 7(3), 1–12. Haghseresht, F., & Lu, G. Q. (1998). Adsorption characteristics of phenolic compounds onto coal-reject-derived adsorbents. Energy & Fuels, 12(6), 1100–1107. Hatt, J. W., Germain, E., & Judd, S. J. (2013). Granular activated carbon for removal of organic matter and turbidity from secondary wastewater. Water Science and Technology, 67(4), 846–853. Hermosilla, D., Merayo, N., Gascó, A., & Blanco, Á. (2015). The application of advanced oxidation technologies to the treatment of effluents from the pulp and paper industry: a review. Environmental Science and Pollution Research, 22(1), 168–191. Hidayu, A. R., Mohamad, N. F., Matali, S., & Sharifah, A. S. A. K. (2013). Characterization of activated carbon prepared from oil palm empty fruit bunch using BET and FT-IR techniques. Procedia Engineering, 68, 379–384. Hidayu, A. R., & Muda, N. (2016). Preparation and characterization of impregnated activated carbon from palm kernel shell and coconut shell for CO2 capture. Procedia Engineering, 148, 106–113. Hmidi, K., Ksentini, I., & Mansour, L. B. (2017). Treatment of olive-pomace oil refinery wastewater using combined coagulation-electroflotation process. Journal of Water Chemistry and Technology, 39(5), 275–280. Ho, Y. S., & Mckay, G. (2009). The kinetics of sorption of basic dyes from aqueous solution by sphagnum moss peat. The Canadian Journal of Chemical Engineering, 76(4), 822–827. Ibrahim, I., Hassan, M. A., Abd-Aziz, S., Shirai, Y., Andou, Y., Othman, M. R., … Zakaria, M. R. (2017). Reduction of residual pollutants from biologically treated palm oil mill effluent final discharge by steam activated bioadsorbent from oil palm biomass. Journal of Cleaner Production, 141, 122–127. Islam, M. A., Benhouria, A., Asif, M., & Hameed, B. H. (2015). Methylene blue adsorption on factory-rejected tea activated carbon prepared by conjunction of hydrothermal carbonization and sodium hydroxide activation processes. Journal of the Taiwan Institute of Chemical Engineers, 52, 57–64. Islam, M. A., Sabar, S., Benhouria, A., Khanday, W. A., Asif, M., & Hameed, B. H. (2017). Nanoporous activated carbon prepared from karanj (Pongamia pinnata) fruit hulls for methylene blue adsorption. Journal of the Taiwan Institute of Chemical Engineers, 74, 96–104. Islam, M. A., Ahmed, M. J., Khanday, W. A., Asif, M., & Hameed, B. H. (2017). Mesoporous activated carbon prepared from NaOH activation of rattan (Lacosperma secundiflorum) hydrochar for methylene blue removal. Ecotoxicology and Environmental Safety, 138, 279–285. Islam, M .A., Tan, I. A. W., Benhouria, A., Asif, M., & Hameed, B. H. (2015). Mesoporous and adsorptive properties of palm date seed activated carbon prepared via sequential hydrothermal carbonization and sodium hydroxide activation. Chemical Engineering Journal, 270, 187–195. Jalani, N. F., Aziz, A. A., Wahab, N. A., Wan Hassan, W. H., & Zainal, N. H. (2016). Application of palm kernel shell activated carbon for the removal of pollutant and color in palm oil mill effluent treatment. Journal of Earth, Environment and Health Sciences, 2(1), 15–20. Jeong, J.-Y., Son, S.-M., Pyon, J.-H., & Park, J.-Y. (2014). Performance comparison between mesophilic and thermophilic anaerobic reactors for treatment of palm oil mill effluent. Bioresource Technology, 165, 122–128. Jijai, S., Muleng, S., & Siripatana, C. (2017). Effect of dilution and ash supplement on the bio-methane potential of palm oil mill effluent (POME). AIP Conference Proceedings, 1868(020013), 1–10. Joseph, C. G., Anisuzzaman, S., Abang, S., Musta, B., Quek, K. S., & Wong, X. L. (2017). Adsorption performance and evaluation of activated carbon from coconut shell for the removal of chlorinated phenols in aqueous medium. Materials Science, 23(4), 389–397. Jun, S., Li, W., & Gang, S. (2014). Research on influence factors on determination of specific surface area of carbon materical by N2 adsorption method. Journal of Applied Science and Engineering Innovation, 1(1), 77–82. Kamaraj, R., Ganesan, P., & Vasudevan, S. (2015). Removal of lead from aqueous solutions by electrocoagulation: Isotherm, kinetics and thermodynamic studies. International Journal of Environmental Science and Technology, 12(2), 683–692. Kermet-Said, H., & Moulai-Mostefa, N. (2015). Optimization of turbidity and COD removal from pharmaceutical wastewater by electrocoagulation: Isotherm modeling and cost analysis. Polish Journal of Environmental Studies, 24(3), 1049–1061. Khandegar, V., Acharya, S., & Jain, A. K. (2018). Data on treatment of sewage wastewater by electrocoagulation using punched aluminum electrode and characterization of generated sludge. Data in Brief, 18, 1229–1238. Khemkhao, M., Techkarnjanaruk, S., & Phalakornkule, C. (2015). Simultaneous treatment of raw palm oil mill effluent and biodegradation of palm fiber in a high-rate CSTR. Bioresource Technology, 177, 17–27. Krishni, R. R., Foo, K. Y., & Hameed, B. H. (2014). Adsorptive removal of methylene blue using the natural adsorbent-banana leaves. Desalination and Water Treatment, 52(31–33), 6104–6112. Lagergren, S., & Svenska, B. (1898). Zur theorie der sogenannten. “Adsorption geloester stoffe.” Veternskapsakad Handlingar, 24, 1–39. Langmuir, I. (1918). The adsorption of gases on plane surfaces of glass, mica and platinum. Journal of the American Chemical Society, 40(9), 1361–1403. Liew, W. L., Kassim, M. A., Muda, K., Loh, S. K., & Affam, A. C. (2014). Conventional methods and emerging wastewater polishing technologies for palm oil mill effluent treatment: A review. Journal of Environmental Management, 149, 222–235. Linares Hernández, I., Barrera Díaz, C., Valdés Cerecero, M., Almazán Sánchez, P. T., Castañeda Juárez, M., & Lugo Lugo, V. (2017). Soft drink wastewater treatment by electrocoagulation–electrooxidation processes. Environmental Technology, 38(4), 433–442. Mahmad, M. K. N., Rozainy, M. A. Z. M. R., Abustan, I., & Baharun, N. (2016). Electrocoagulation process by using aluminium and stainless steel electrodes to treat total chromium, colour and turbidity. Procedia Chemistry, 19, 681–686. Makwana, A. R., & Ahammed, M. M. (2017). Electrocoagulation process for the post-treatment of anaerobically treated urban wastewater. Separation Science and Technology, 52(8), 1412–1422. Malakahmad, A., & Chuan, S. Y. (2013). Application of response surface methodology to optimize coagulation-flocculation treatment of anaerobically digested palm oil mill effluent using alum. Desalination and Water Treatment, 51(34–36), 6729–6735. Malaysian Palm Oil Board, M. (2018). Economic & Statistics. Retrieved from http://bepi.mpob.gov.my/index.php/en/ Marrakchi, F., Ahmed, M. J., Khanday, W. A., Asif, M., & Hameed, B. H. (2017). Mesoporous-activated carbon prepared from chitosan flakes via single-step sodium hydroxide activation for the adsorption of methylene blue. International Journal of Biological Macromolecules, 98, 233–239. Merck. (2019). IR Spectrum Table & Chart. Retrieved from https://www.sigmaaldrich.com/technical-documents/articles/biology/ir-spectrum-table.html Mhatre, S., Vivacqua, V., Ghadiri, M., Abdullah, A. M., Al-Marri, M. J., Hassanpour, A., … Kermani, B. (2015). Electrostatic phase separation: A review. Chemical Engineering Research and Design, 96, 177–195. Mkpenie, V. N., & Abakedi, O. U. (2015). Electrocoagulation of Azo-2-Naphthol dye using aluminium electrodes: Effect of solvent and kinetics of adsorption. Current Research in Chemistry, 7(2), 34–43. Mohammed, J., Nasri, N. S., Zaini, M. A. A., Hamza, U. D., Zain, H. M., & Ani, F. N. (2016). Optimization of microwave irradiated - coconut shell activated carbon using response surface methodology for adsorption of benzene and toluene. Desalination and Water Treatment, 57(17), 7881–7897. Mohammed, R. R. (2013). Decolorisation of biologically treated palm oil mill effluent (POME) using adsorption technique. International Refereed Journal of Engineering and Science, 2(10), 1–11. Mohammed, R. R., & Chong, M. F. (2014). Treatment and decolorization of biologically treated palm oil mill effluent (POME) using banana peel as novel biosorbent. Journal of Environmental Management, 132, 237–249. Mohammed, R. R., Ketabchi, M. R., & Mckay, G. (2014). Combined magnetic field and adsorption process for treatment of biologically treated palm oil mill effluent (POME). Chemical Engineering Journal, 243, 31–42. Moussa, D. T., El-Naas, M. H., Nasser, M., & Al-Marri, M. J. (2017). A comprehensive review of electrocoagulation for water treatment: Potentials and challenges. Journal of Environmental Management, 186, 24–41. Myllymäki, P., Lahti, R., Romar, H., & Lassi, U. (2018). Removal of total organic carbon from peat solution by hybrid method—Electrocoagulation combined with adsorption. Journal of Water Process Engineering, 24, 56–62. Naje, A. S., Chelliapan, S., Zakaria, Z., & Abbas, S. A. (2015). Treatment performance of textile wastewater using electrocoagulation (EC) process under combined electrical connection of electrodes. International Journal of Electrochemical Science, 10(7), 5924–5941. Naje, A. S., Chelliapan, S., Zakaria, Z., & Abbas, S. A. (2016). Electrocoagulation using a rotated anode: A novel reactor design for textile wastewater treatment. Journal of Environmental Management, 176, 34–44. Nam, H., Choi, W., Genuino, D. A., & Capareda, S. C. (2018). Development of rice straw activated carbon and its utilizations. Journal of Environmental Chemical Engineering, 6(4), 5221–5229. Nasrullah, M., Singh, L., Krishnan, S., Sakinah, M., & Zularisam, A. W. (2018). Electrode design for electrochemical cell to treat palm oil mill effluent by electrocoagulation process. Environmental Technology & Innovation, 9, 323–341. Nasrullah, M., Singh, L., Mohamad, Z., Norsita, S., Krishnan, S., Wahida, N., & Zularisam, A. W. (2017). Treatment of palm oil mill effluent by electrocoagulation with presence of hydrogen peroxide as oxidizing agent and polialuminum chloride as coagulant-aid. Water Resources and Industry, 17, 7–10. Nasrullah, M., Zularisam, A. W., Krishnan, S., Sakinah, M., Singh, L., & Wing Fen, Y. (2019). High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application. Chinese Journal of Chemical Engineering, 27, 208–217. Nawarkar, C. J., & Salkar, V. D. (2019). Solar powered electrocoagulation system for municipal wastewater treatment. Fuel, 237, 222–226. Nayır, T. Y., & Kara, S. (2018). Container washing wastewater treatment by combined electrocoagulation–electrooxidation. Separation Science and Technology, 53(10), 1592–1603. Neoh, C. H., Yahya, A., Adnan, R., Abdul Majid, Z., & Ibrahim, Z. (2013). Optimization of decolorization of palm oil mill effluent (POME) by growing cultures of Aspergillus fumigatus using response surface methodology. Environmental Science and Pollution Research, 20(5), 2912–2923. Nethaji, S., Sivasamy, A., & Mandal, A. B. (2013). Adsorption isotherms, kinetics and mechanism for the adsorption of cationic and anionic dyes onto carbonaceous particles prepared from Juglans regia shell biomass. International Journal of Environmental Science and Technology, 10(2), 231–242. Ng, K. H., & Cheng, C. K. (2015). A novel photomineralization of POME over UV-responsive TiO2 photocatalyst: kinetics of POME degradation and gaseous product formations. RSC Advances, 5(65), 53100–53110. Ng, K. H., & Cheng, C. K. (2016). Photo-polishing of POME into CH4-lean biogas over the UV-responsive ZnO photocatalyst. Chemical Engineering Journal, 300, 127–138. Ng, K. H., Khan, M. R., Ng, Y. H., Hossain, S. S., & Cheng, C. K. (2017). Restoration of liquid effluent from oil palm agroindustry in Malaysia using UV/TiO2 and UV/ZnO photocatalytic systems: A comparative study. Journal of Environmental Management, 196, 674–680. Ng, K. H., Lee, C. H., Khan, M. R., & Cheng, C. K. (2016). Photocatalytic degradation of recalcitrant POME waste by using silver doped titania: Photokinetics and scavenging studies. Chemical Engineering Journal, 286, 282–290. Niksiar, A., & Nasernejad, B. (2018). Modeling of gasification reaction to produce activated carbon from pistachio shells in a spouted bed. Biomass and Bioenergy, 119, 97–108. Nwabanne, J. T., Oguegbu, O. O., & Agu, C. M. (2018). Removal of solids from palm oil mill effluent and paint wastewater using electrocoagulation technique. International Journal of Electrochemsitry, 2018, 1–9. Nwuche, C. O., Aoyagi, H., & Ogbonna, J. C. (2014). Treatment of palm oil mill effluent by a microbial consortium developed from compost soils. International Scholarly Research Notices, 2014, 1–8. Othman, M. R., Hassan, M. A., Shirai, Y., Baharuddin, A. S., Ali, A. A. M., & Idris, J. (2014). Treatment of effluents from palm oil mill process to achieve river water quality for reuse as recycled water in a zero emission system. Journal of Cleaner Production, 67, 58–61. Ouaissa, Y. A., Chabani, M., Amrane, A., & Bensmaili, A. (2012). Integration of electro coagulation and adsorption for the treatment of tannery wastewater - The case of an Algerian factory, Rouiba. Procedia Engineering, 33, 98–101. Pallarés, J., González-Cencerrado, A., & Arauzo, I. (2018). Production and characterization of activated carbon from barley straw by physical activation with carbon dioxide and steam. Biomass and Bioenergy, 115, 64–73. Papadopoulos, K. P., Argyriou, R., Economou, C. N., Charalampous, N., Dailianis, S., Tatoulis, T. I., … Vayenas, D. V. (2019). Treatment of printing ink wastewater using electrocoagulation. Journal of Environmental Management, 237, 442–448. Parthasarathy, S., Gomes, R. L., & Manickam, S. (2016). Process intensification of anaerobically digested palm oil mill effluent (AAD-POME) treatment using combined chitosan coagulation, hydrogen peroxide (H2O2) and Fenton’s oxidation. Clean Technologies and Environmental Policy, 18(1), 219–230. Parthasarathy, S., Mohammed, R. R., Fong, C. M., Gomes, R. L., & Manickam, S. (2016). A novel hybrid approach of activated carbon and ultrasound cavitation for the intensification of palm oil mill effluent (POME) polishing. Journal of Cleaner Production, 112, 1218–1226. Pezoti, O., Cazetta, A. L., Bedin, K. C., Souza, L. S., Martins, A. C., Silva, T. L., … Almeida, V. C. (2016). NaOH-activated carbon of high surface area produced from guava seeds as a high-efficiency adsorbent for amoxicillin removal: Kinetic, isotherm and thermodynamic studies. Chemical Engineering Journal, 288, 778–788. Pezoti, O., Cazetta, A. L., Souza, I. P. A. F., Bedin, K. C., Martins, A. C., Silva, T. L., & Almeida, V. C. (2014). Adsorption studies of methylene blue onto ZnCl2-activated carbon produced from buriti shells (Mauritia flexuosa L.). Journal of Industrial and Engineering Chemistry, 20(6), 4401–4407. Poh, P. E., & Chong, M. F. (2014). Upflow anaerobic sludge blanket-hollow centered packed bed (UASB-HCPB) reactor for thermophilic palm oil mill effluent (POME) treatment. Biomass and Bioenergy, 67, 231–242. Poh, P. E., Ong, W. Y. J., Lau, E. V, & Chong, M. N. (2014). Investigation on micro-bubble flotation and coagulation for the treatment of anaerobically treated palm oil mill effluent (POME). Journal of Environmental Chemical Engineering, 2(2), 1174–1181. Reichenberg, D. (1953). Properties of ion-exchange resins in relation to their structure. III. kinetics of exchange. Journal of the American Chemical Society, 75(3), 589–597. Ribeiro, M. C. M., Starling, M. C. V. M., Leão, M. M. D., & de Amorim, C. C. (2017). Textile wastewater reuse after additional treatment by Fenton’s reagent. Environmental Science and Pollution Research, 24(7), 6165–6175. Rubí-Juárez, H., Barrera-Díaz, C., & Ureña-Nuñez, F. (2017). Adsorption-assisted electrocoagulation of real car wash wastewater with equilibrium and kinetic studies. Pollution Research, 36(2), 175–184. Rueda-Márquez, J. J., Sillanpää, M., Pocostales, P., Acevedo, A., & Manzano, M. A. (2015). Post-treatment of biologically treated wastewater containing organic contaminants using a sequence of H2O2 based advanced oxidation processes: Photolysis and catalytic wet oxidation. Water Research, 71, 85–96. Rugayah, A. F., Astimar, A. A., & Norzita, N. (2014). Preparation and characterisation of activated carbon from palm kernel shell by physical activation with steam. Journal of Oil Palm Research, 26(3), 251–264. Saeed, M. O., Azizli, K. A. M., Isa, M. H., & Ezechi, E. H. (2016). Treatment of POME using Fenton oxidation process: Removal efficiency, optimization, and acidity condition. Desalination and Water Treatment, 57(50), 23750–23759. Saeed, M. O., Azizli, K., Isa, M. H., & Bashir, M. J. K. (2015). Application of CCD in RSM to obtain optimize treatment of POME using Fenton oxidation process. Journal of Water Process Engineering, 8, e7–e16. Safari, S., Azadi Aghdam, M., & Kariminia, H. R. (2016). Electrocoagulation for COD and diesel removal from oily wastewater. International Journal of Environmental Science and Technology, 13(1), 231–242. Sahu, O., Mazumdar, B., & Chaudhari, P. K. (2014). Treatment of wastewater by electrocoagulation: A review. Environmental Science and Pollution Research, 21(4), 2397–2413. Sahu, O., Rao, D. G., Thangavel, A., & Ponnappan, S. (2018). Treatment of sugar industry wastewater using a combination of thermal and electrocoagulation processes. International Journal of Sustainable Engineering, 11(1), 16–25. Said, M., Ahmad, A., Mohammad, A. W., Nor, M. T. M., & Sheikh Abdullah, S. R. (2015). Blocking mechanism of PES membrane during ultrafiltration of POME. Journal of Industrial and Engineering Chemistry, 21, 182–188. Sartape, A. S., Mandhare, A. M., Jadhav, V. V., Raut, P. D., Anuse, M. A., & Kolekar, S. S. (2017). Removal of malachite green dye from aqueous solution with adsorption technique using Limonia acidissima (wood apple) shell as low cost adsorbent. Arabian Journal of Chemistry, 10, S3229–S3238. Sayğılı, H., & Güzel, F. (2016). High surface area mesoporous activated carbon from tomato processing solid waste by zinc chloride activation: Process optimization, characterization and dyes adsorption. Journal of Cleaner Production, 113, 995–1004. Shak, K. P. Y., & Wu, T. Y. (2015). Optimized use of alum together with unmodified Cassia obtusifolia seed gum as a coagulant aid in treatment of palm oil mill effluent under natural pH of wastewater. Industrial Crops and Products, 76, 1169–1178. Shamsuddin, M. S., Yusoff, N. R. N., & Sulaiman, M. A. (2016). Synthesis and characterization of activated carbon produced from kenaf core fiber using H3PO4 activation. Procedia Chemistry, 19, 558–565. Shankar, R., Singh, L., Mondal, P., & Chand, S. (2014). Removal of COD, TOC, and color from pulp and paper industry wastewater through electrocoagulation. Desalination and Water Treatment, 52(40–42), 7711–7722. Shimadzu. (2018). TOC Analyzers. Retrieved from https://www.shimadzu.com/an/toc/lab/toc-l4.html Singh, L., Siddiqui, M. F., Ahmad, A., Rahim, M. H. A., Sakinah, M., & Wahid, Z. A. (2013). Application of polyethylene glycol immobilized Clostridium sp. LS2 for continuous hydrogen production from palm oil mill effluent in upflow anaerobic sludge blanket reactor. Biochemical Engineering Journal, 70, 158–165. Smitha, T., Santhi, T., Prasad, A. L., & Manonmani, S. (2017). Cucumis sativus used as adsorbent for the removal of dyes from aqueous solution. Arabian Journal of Chemistry, 10, S244–S251. Souza, B. M., Marinho, B. A., Moreira, F. C., Dezotti, M. W. C., Boaventura, R. A. R., & Vilar, V. J. P. (2017). Photo-Fenton oxidation of 3-amino-5-methylisoxazole: a by-product from biological breakdown of some pharmaceutical compounds. Environmental Science and Pollution Research, 24(7), 6195–6204. Spagnoli, A. A., Giannakoudakis, D. A., & Bashkova, S. (2017). Adsorption of methylene blue on cashew nut shell based carbons activated with zinc chloride: The role of surface and structural parameters. Journal of Molecular Liquids, 229, 465–471. Suhas, Gupta, V. K., Carrott, P. J. M., Singh, R., Chaudhary, M., & Kushwaha, S. (2016). Cellulose: A review as natural, modified and activated carbon adsorbent. Bioresource Technology, 216, 1066–1076. Taha, M. R., & Ibrahim, A. H. (2014). COD removal from anaerobically treated palm oil mill effluent (AT-POME) via aerated heterogeneous Fenton process: Optimization study. Journal of Water Process Engineering, 1, 8–16. Tak, B.-Y., Tak, B.-S., Kim, Y.-J., Park, Y.-J., Yoon, Y.-H., & Min, G.-H. (2015). Optimization of color and COD removal from livestock wastewater by electrocoagulation process: Application of Box-Behnken design (BBD). Journal of Industrial and Engineering Chemistry, 28, 307–315. Temkin, M. I., & Pyzhev, V. (1940). Kinetics of ammonia synthesis on promoted iron catalyst. Acta. Physiochim. URSS, 12, 327–356. Tharaneedhar, V., Senthil Kumar, P., Saravanan, A., Ravikumar, C., & Jaikumar, V. (2017). Prediction and interpretation of adsorption parameters for the sequestration of methylene blue dye from aqueous solution using microwave assisted corncob activated carbon. Sustainable Materials and Technologies, 11, 1–11. Thirugnanasambandham, K., & Sivakumar, V. (2016). Removal of ecotoxicological matters from tannery wastewater using electrocoagulation reactor: Modelling and optimization. Desalination and Water Treatment, 57(9), 3871–3880. Thitame, P. V, & Shukla, S. R. (2016). Adsorptive removal of reactive dyes from aqueous solution using activated carbon synthesized from waste biomass materials. International Journal of Environmental Science and Technology, 13(2), 561–570. Trisakti, B., Manalu, V., Taslim, I., & Turmuzi, M. (2015). Acidogenesis of palm oil mill effluent to produce biogas: Effect of hydraulic retention time and pH. Procedia - Social and Behavioral Sciences, 195, 2466–2474. Varank, G., & Sabuncu, M. E. (2015). Application of Central Composite Design approach for dairy wastewater treatment by electrocoagulation using iron and aluminum electrodes: Modeling and optimization. Desalination and Water Treatment, 56(1), 33–54. Vunain, E., Kenneth, D., & Biswick, T. (2017). Synthesis and characterization of low-cost activated carbon prepared from Malawian baobab fruit shells by H3PO4 activation for removal of Cu (II) ions: Equilibrium and kinetics studies. Applied Water Science, 7(8), 4301–4319. Weber, T. W., & Chakravorti, R. K. (1974). Pore and solid diffusion models for fixed‐bed adsorbers. AIChE Journal, 20(2), 228–238. Weber, W. J., & Morris, J. C. (1962). Advances in water pollution research: Removal of biologically resistant pollutants from waste waters by adsorption. In Proceedings of the International Conference on Water Pollution Symposium (pp. 231–266). Wong, Y.-S., Teng, T.-T., Ong, S.-A., Norhashimah, M., Rafatullah, M., & Leong, J.-Y. (2014). Methane gas production from palm oil wastewater—An anaerobic methanogenic degradation process in continuous stirrer suspended closed anaerobic reactor. Journal of the Taiwan Institute of Chemical Engineers, 45(3), 896–900. Wong, Y.-S., Teng, T. T., Ong, S.-A., Norhashimah, M., Rafatullah, M., & Lee, H.-C. (2013). Anaerobic acidogenesis biodegradation of palm oil mill effluent using suspended closed anaerobic bioreactor (SCABR) at mesophilic temperature. Procedia Environmental Sciences, 18, 433–441. Yacob, A. R., Abdul Majid, Z., Dasril, R. S. D., & Inderan, V. (2008). Comparison of various sources of high surface area carbon prepared by different types of activation. The Malaysian Journal of Analytical Sciences, 12(1), 264–271. Yahya, M. A., Al-Qodah, Z., & Ngah, C. W. Z. (2015). Agricultural bio-waste materials as potential sustainable precursors used for activated carbon production: A review. Renewable and Sustainable Energy Reviews, 46, 218–235. Yang, K., Peng, J., Srinivasakannan, C., Zhang, L., Xia, H., & Duan, X. (2010). Preparation of high surface area activated carbon from coconut shells using microwave heating. Bioresource Technology, 101, 6163–6169. Yavuz, Y., & Ögütveren, B. (2018). Treatment of industrial estate wastewater by the application of electrocoagulation process using iron electrodes. Journal of Environmental Management, 207, 151–158. Zahrim, A. Y., Dexter, Z. D., Joseph, C. G., & Hilal, N. (2017). Effective coagulation-flocculation treatment of highly polluted palm oil mill biogas plant wastewater using dual coagulants: Decolourisation, kinetics and phytotoxicity studies. Journal of Water Process Engineering, 16, 258–269. Zahrim, A. Y., Nasimah, A., & Hilal, N. (2014). Pollutants analysis during conventional palm oil mill effluent (POME) ponding system and decolourisation of anaerobically treated POME via calcium lactate-polyacrylamide. Journal of Water Process Engineering, 4, 159–165. Zainal, N. H., Abdul Aziz, A., Idris, J., Jalani, N. F., Mamat, R., Ibrahim, M. F., … Abd-Aziz, S. (2018). Reduction of POME final discharge residual using activated bioadsorbent from oil palm kernel shell. Journal of Cleaner Production, 182, 830–837. Zangeneh, H., Zinatizadeh, A. A., Zinadini, S., Feyzi, M., & Bahnemann, D. W. (2018). A novel photocatalytic self-cleaning PES nanofiltration membrane incorporating triple metal-nonmetal doped TiO2 (K-B-N-TiO2) for post treatment of biologically treated palm oil mill effluent. Reactive and Functional Polymers, 127, 139–152. Zhu, M., Yin, X., Chen, W., Yi, Z., & Tian, H. (2019). Removal of sulphate from mine waters by electrocoagulation/rice straw activated carbon adsorption coupling in a batch system: Optimization of process via response surface methodology. Journal of Water Reuse and Desalination, 9(2), 163–172. Zinatizadeh, A. A., Ibrahim, S., Aghamohammadi, N., Mohamed, A. R., Zangeneh, H., & Mohammadi, P. (2017). Polyacrylamide-induced coagulation process removing suspended solids from palm oil mill effluent. Separation Science and Technology, 52(3), 520–527.