Chemical treatment of wastewater from palm oil mill effluent (POME) in cooperate with biodiesel production
(The international demand for oil palm (Elaeis guineensis) is increasing, which lead to the rapid growth of palm oil industry in Malaysia. However, the industry is facing the challenge of sustainable water management due to large volume of water is used in the palm oil mill for the oil extraction p...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2013
|
| 主題: | |
| 在線閱讀: | http://ir.unimas.my/id/eprint/8763/1/Chin%20Siaw%20Yin%20ft.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | (The international demand for oil palm (Elaeis guineensis) is increasing, which lead to the rapid growth of palm oil industry in Malaysia. However, the industry is facing the challenge of sustainable water
management due to large volume of water is used in the palm oil mill for the oil extraction process and
increase of production of wastewater which is known as palm oil mill effluent (POME). This study
detennines the POME water quality prior and after the POME is used to produce biodiesel. Indeed, further
chemical treatment was used in order to obtain a better water quality. The objective of treating the POME is
to reuse or recycle the water in the mill plant for example in the cooling process. Thus, the findings from this
study helps to reduce freshwater consumption of the palm oil plant and minimum oil residue in the POME
before it discharge to the receiving environmental bodies. Besides pollution prevention of the river,
wastewater recycling within industry is also a resource recovery which helps reduce wastewater generation
and save the production cost of the industry. In this study, POME was treated by de-oil process (biodiesel
production) and the residual wastewater was treated with Fenton and photo-Fenton process, which COD
reduction show high efficiency, which were 89.36% reduction through Fenton and 90.78% through photoFenton
process. |
|---|